Research for Brazing Materials of High-Temperature Thermoelectric Modules with CoSb3 Thermoelectric Materials
Source abstract
Abstract
Metallic glass (MG) can be a candidate for an alternative brazing material of high-temperature thermoelectric modules, since we can expect both a lower brazing temperature and a high operating temperature for the junction from the MG brazers. Another advantage of MG powders is their outstanding oxidation resistance, namely, high-temperature durability in atmosphere. We fabricated three compositions of Al-based MGs—Al-Y-Ni, Al-Y-Ni-Co, and Al-Y-Ni-Co-La—by using the melt spinning process, and their Tgs were 273°C, 264°C, and 249°C, respectively. The electrical resistivity of the Al-Y-Ni MG ribbon dropped significantly after annealing at 300°C. The electrical resistivity of crystallized Al-Y-Ni reduced down to 0.03 mΩ cm, which is an order of magnitude lower than that of the amorphous one. After the MG ribbons were pulverized to sub-100 μm, the average particle size was about 400 μm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Intermetallics and Advanced Alloy Properties · Thermodynamic and Structural Properties of Metals and Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. K. Bae, S. Choi, K. Kim, H. Choi, W. Seo, I. Kim, S. Lee, and H. Hwang, J. Electron. Mater. 2124, 44 (2015).
2. J.Q. Guo, H.Y. Geng, T. Ochi, S. Suzuki, M. Kikuchi, Y. Yamaguchi, and S. Ito, J. Electron. Mater. 1036, 41 (2012).
3. J.G. Noudem, S. Lemonnier, M. Prevel, E.S. Reddy, E. Guilmeau, and C. Goupil, J. Eur. Ceram. Soc. 41, 28 (2008).
4. S. Choi, K. Kim, S. Jeong, H. Choi, Y. Lim, W. Seo, and I. Kim, J. Electron. Mater. 1004, 41 (2012).
5. C. Lim, S. Choi, W. Seo, and H. Park, J. Electron. Mater. 1247, 41 (2012).
6. S. Choi, K. Lee, C. Lim, and W. Seo, J. Energy Convers. Manag. 52, 335 (2011).10.1016/j.enconman.2010.07.005 ↗
7. B. Song, S. Lee, S. Cho, M. Song, S. Choi, W. Seo, Y. Yoon, and W. Lee, J. Alloys Compd. 160, 617 (2014).
8. C. Lim, S. Choi, W. Seo, M. Lee, K. Lee, and H. Park, Electon. Mater. Lett. 445, 9 (2013).
9. K. Park, S. You, S. Ur, I. Kim, S. Choi, and W. Seo, J. Electron. Mater. 41, 1051 (2012).10.1007/s11664-011-1889-1 ↗
10. K. Park, W. Seo, S. Choi, and I. Kim, J. Korean Phys. Soc. 79, 64 (2014).
11. Y. Saotome and H. Iwazaki, Microsyst. Technol. 6, 126 (2000).10.1007/s005420050180 ↗
12. ASTM D6862: Standard Test Method for 90 degree Peel Adhesion, Annual Book of ASTM Standards (ASTM International, West Conshohocken, PA, 1997).
13. D.M. Rowe, ed., Thermoelectric Handbook: Macro to Nano, chap. 1 (Boca Raton: CRC Taylor and Francis, 2006), p. 1.
14. D. Zhao, X. Li, L. He, W. Jiang, and L.D. Chen, Intermetallics 17, 136 (2009).10.1016/j.intermet.2008.10.010 ↗
15. S.J. Kim, S.Y. Kim, J.M. Park, J.N. Heo, J.H. Lee, S.M. Lee, D.H. Kim, W.T. Kim, K.R. Lim, D. Kim, S.C. Park, H.K. Kim, M.C. Song, J. Park, S.S. Jee, and E.-S. Lee, Appl. Phys. Lett. 101, 064106 (2012).10.1063/1.4742324 ↗