journal article·2006-06

SiCl4-based reactive ion etching of ZnO and MgxZn1−xO films on r-sapphire substrates

J. Zhu, G. Saraf, J. Zhong, H. F. Sheng, B. V. Yakshinskiy, Y. Lu

Journal of Electronic Materials· Volume 35· Issue 6
Publisher page

Abstract

SiCl4-based reactive ion etching (RIE) is used to etch MgxZn1−xO (0≤x≤0.3) films grown on r-plane sapphire substrates. The RIE etch rates are investigated as a function of Mg composition, RIE power, and chamber pressure. SiO2 is used as the etching mask to achieve a good etching profile. In comparison with wet chemical etching, the in-plane etching anisotropy of MgxZn1−xO (0≤x≤0.3) films is reduced in RIE. X-ray photoelectron spectroscopy measurements show that there is no Si and Cl contamination detected at the etched surface under the current RIE conditions. The influence of the RIE to the optical properties has been investigated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Ga2O3 and related materials · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. A. Ohtomo, M. Kawasaki, T. Koida, K. Masubuchi, and H. Koinuma, Appl. Phys. Lett. 72, 2466 (1998).10.1063/1.121384 ↗
2. A.K. Sharma, J. Narayan, J.F. Muth, C.W. Teng, C. Jin, A. Kvit, R.M. Kolbas, and O.W. Holland, Appl. Phys. Lett. 75, 3327 (1999).10.1063/1.125340 ↗
3. W. Yang, R.D. Vispute, S. Choopun, R.P. Sharma, T. Venkatesan, and H. Shen, Appl. Phys. Lett. 78, 2787 (2001).10.1063/1.1368378 ↗
4. K. Koike, K. Hama, I. Nakashima, and G.-Y. Takada, J. Cryst. Growth 278, 288 (2005).10.1016/j.jcrysgro.2005.01.021 ↗
5. J.M. Lee, K.M. Chang, K.K. Kim, W.K. Choi, and S.J. Park, J. Electrochem. Soc. 148 (2001).10.1149/1.1344554 ↗
6. H.-K. Kim, J.W. Bae and T.-K. Kim, J. Vac. Sci. Technol. B21(4) (2003).10.1116/1.1580840 ↗
7. S.-C. Chang, D.B. Hicks, and R.C.O. Laugal, Solid-State Sensor and Actuator Workshop, 1992, 5th Technical Digest (Piscataway, NJ: IEEE, 1992), pp. 22–25.
8. K. Ip, K.H. Baik, M.E. Overberg, E.S. Lambers, Y.W. Heo, D.P. Norton, and S.J. Pearton, Appl. Phys. Lett. 81, 3546 (2002).10.1063/1.1519095 ↗
9. W.T. Lim, I.K. Baek, J.W. Lee, E.S. Lee, M.H. Jeon, and G.S. Cho, Appl. Phys. Lett. 83, 3105 (2003).10.1063/1.1618373 ↗
10. K. Koike, I. Nakashima, K. Hashimoto, S. Sasa, M. Inoue, and M. Yano, Appl. Phys. Lett. 87, 112106 (2005).10.1063/1.2045558 ↗
11. K. Ogata, T. Honden, T. Tanite, T. Komuro, K. Koike, S. Sasa, M. Inoue, and M. Yano, J. Vac. Sci. Technol. A 22, 531 (2004).10.1116/1.1690777 ↗
12. M. Madou, Fundamentals of Microfabrication (Boca Raton, FL: CRC Press LLC, 1997).
13. J. Zhu, N.W. Emanetoglu, Y. Chen, and Y. Lu, J. Electron. Mater. 33, 556 (2004).10.1007/s11664-004-0046-5 ↗
14. S.J. Pearton, D.P. Norton, K. Ip, Y.W. Heo, and T. Steiner, J. Vac. Sci. Technol. B22 (3) (2004).10.1116/1.1714985 ↗