journal article·2014-03

Local and Global Properties of a Lead-Free Solder

Z. Ma, F. Chalon, R. Leroy, N. Ranganathan, B.D. Beake

Journal of Electronic Materials· Volume 43· Issue 3
Publisher page

Abstract

Elastic and viscous properties including Young’s modulus, hardness, creep rate sensitivity, and fatigue resistance of Sn-1.2Ag-0.5Cu-0.05Ni lead-free solder have been investigated. The properties of bulk specimens and in situ solder balls are compared. Experiments show good correlations of Young’s modulus and creep rate sensitivity between conventional measurements and nanoindentation results on bulk specimens. Further mechanical properties of the beach-ball microstructure in solder balls are characterized by nanoindentation. The load–partial unload technique has been used to determine the variation in mechanical properties with increasing depth of penetration into the intermetallic inclusions in the in situ solder. The fatigue resistances of the bulk specimens and solder balls are compared by using the novel nanoimpact method. In comparison with bulk specimens, it is found that in situ solder has higher Young’s modulus, lower creep strain rate sensitivity, and better fatigue resistance. The effects of soldering and the scale differences strongly affect the mechanical and fatigue properties of in situ solder.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Metal and Thin Film Mechanics · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. D.Y.R. Chong, F.X. Chen, J.H.L. Pang, K. Ng, J.Y.N. Tan, and P.T.H. Low, Microelectron. Reliab. 46, 1160 (2006).10.1016/j.microrel.2005.10.011 ↗
2. M. Kerr and N. Chawala, Acta Mater. 52, 4527 (2004).10.1016/j.actamat.2004.06.010 ↗
3. W. Yang, L.E. Felton, and J.R.W. Messler, J. Electron. Mater. 24, 1465 (1995).10.1007/BF02655465 ↗
4. J.H.L. Pang, T.H. Low, B.S. Xiong, X. Luhua, and C.C. Neo, Thin Solid Films 462–463, 370 (2004).10.1016/j.tsf.2004.05.092 ↗
5. H. Tsukamoto, T. Nishimura, S. Suenaga, and K. Nogita, Mater. Sci. Eng. B 171, 162 (2010).10.1016/j.mseb.2010.03.092 ↗
6. J.Y.H. Chia, B. Cotterell, and T.C. Chai, Mater. Sci. Eng. A 417, 259 (2006).10.1016/j.msea.2005.10.064 ↗
7. M.J. Mayo and W.D. Nix, Acta Metall. 36, 2183 (1988).10.1016/0001-6160(88)90319-7 ↗
8. R. Goodall and Y.W. Clyne, Acta Mater. 54, 5489 (2006).10.1016/j.actamat.2006.07.020 ↗
9. V.L. Niranjani, B.S.S. Chandra Rao, R. Sarkar, and S.V. Kamat, J. Alloys Compd. 542, 136 (2012).10.1016/j.jallcom.2012.07.044 ↗
10. F. Gao and T. Takemoto, Mater. Lett. 60, 2315 (2006).10.1016/j.matlet.2005.12.132 ↗
11. L. Shen, P. Septiwerdani, and Z. Chen, Mater. Sci. Eng. A 558, 253 (2012).10.1016/j.msea.2012.07.120 ↗
12. L. Shen, W.C.D. Cheong, Y.L. Foo, and Z. Chen, Mater. Sci. Eng. A 532, 505 (2012).10.1016/j.msea.2011.11.016 ↗
13. V.M.F. Marques, C. Johnston, and P.S. Grant, Acta Mater. 61, 2460 (2013).10.1016/j.actamat.2013.01.019 ↗
14. V.M.F. Marques, B. Wunderle, C. Johnston, and P.S. Grant, Acta Mater. 61, 2471 (2013).10.1016/j.actamat.2013.01.020 ↗
15. B.D. Beake, S.P. Lau, and J.F. Smith, Surf. Coat. Technol. 177–178, 611 (2004).10.1016/S0257-8972(03)00934-4 ↗
16. B.D. Beake and J.F. Smith, Surf. Coat. Technol. 188–189, 594 (2004).10.1016/j.surfcoat.2004.07.016 ↗
17. B.D. Beake, R. Stephen, James. Goodes, and F. Smith, J. Mater. Res. 19, 237 (2004).10.1557/jmr.2004.19.1.237 ↗
18. W.R. La Fontaine, B. Yost, R.D. Black, and C.Y. Li, J. Mater. Res. 5, 2100 (1990).10.1557/JMR.1990.2100 ↗
19. B.N. Lucas and W.C. Oliver, Metall. Mater. Trans. A 30A, 601 (1999).10.1007/s11661-999-0051-7 ↗
20. F.Q. Li and C.Q. Wang, Trans. Nonferr. Met. Soc. China 16, 18 (2006).10.1016/S1003-6326(06)60004-6 ↗
21. Y. Xia, X. Xie, C. Lu, and J. Chang, J. Alloy Compd. 417, 143 (2006).10.1016/j.jallcom.2005.09.051 ↗
22. K. Nogita, Intermetallics 18, 145 (2010).10.1016/j.intermet.2009.07.005 ↗
23. K. Dong and G. Shang, Lead Free Solder Interconnect Reliability (Materials Park, OH: ASM International, 2005), p. 77.
24. J. Bath, Lead-Free Soldering, Lead Free Solder Joint Reliability (Springer, New York, 2007), p. 160.10.1007/978-0-387-68422-2 ↗
25. F. Ochoa, X. Deng, and N. Chawala, J. Electron. Mater. 33, 1596 (2004).10.1007/s11664-004-0103-0 ↗
26. X. Deng, N. Chawla, K. Chawla, and M. Koopman, Acta Mater. 52, 4291 (2004).10.1016/j.actamat.2004.05.046 ↗
27. T.R. Bieler and T. Lee, eds., Lead-Free Solder, Encyclopedia of Materials: Science and Technology, 2nd edn. (Elsevier, Oxford, 2010), pp. 1–12.10.1016/B978-008043152-9.02239-9 ↗
28. L.P. Lehman, Y. Xing, T.R. Bieler, and E.J. Cotts, Acta Mater. 58, 3546 (2010).10.1016/j.actamat.2010.01.030 ↗
29. S.P. Peng, W.H. Wu, C.E. Ho, and Y.M. Huang, J. Alloy. Compd. 493, 431 (2010).10.1016/j.jallcom.2009.12.119 ↗
30. R. An, C. Wang, and Y. Tian, International Conference on Electronic Packaging Technology & High Density Packaging (July, 2008), pp. 1–5.
31. A.A. El-Daly and A.M. El-Taher, Mater. Des. 47, 607 (2013).10.1016/j.matdes.2012.12.081 ↗
32. F. Guo, S. Choi, K.N. Subramanian, T.R. Bieler, J.P. Lucas, A. Achari, and M. Paruchuri, Mater. Sci. Eng. A351, 190 (2003).10.1016/S0921-5093(02)00853-5 ↗
33. S. Spigarelli, E. Cerri, P. Bianchi, and E. Evangelista, Mater. Sci. Technol. 15, 1433 (1999).10.1179/026708399101505428 ↗
34. D.V.V. Satyanarayana, G. Malakondaiah, and D.S. Sarma, Mater. Sci. Eng. A. 452, 244 (2007).10.1016/j.msea.2006.10.141 ↗
35. J. Čadek, V. Šustek, and M. Pahutová, Mater. Sci. Eng. A. 225, 22 (1997).10.1016/S0921-5093(96)10569-4 ↗
36. A. Orlová, K. Kuchařová, J. Březina, J. Krejčí, and J. Čadek, Scr. Metall. Mater. 29, 63 (1993).10.1016/0956-716X(93)90255-Q ↗
37. J. Cˇadek, H. Oikawa, and V. Sˇustek, Mater. Sci. Eng. 190, 9 (1995).10.1016/0921-5093(94)09605-V ↗
38. R.S. Mishra, T.R. Bieler, and A.K. Mukherjee, Acta Metall. 43, 877 (1995).10.1016/0956-7151(94)00323-A ↗
39. A.A. El-Daly, Y. Swilem, and A.E. Hammad, J. Alloy. Compd. 471, 98 (2009).10.1016/j.jallcom.2008.03.097 ↗
40. F. Guo, J. Lee, J.P. Lucas, K.N. Subramanian, and T.R. Bieler, J. Electron. Mater. 30, 231 (2001).
41. E. Arzt and E. Gohring, Acta Mater. 16, 6575 (1998).10.1016/S1359-6454(98)00306-1 ↗
42. J.H. Schroder and E. Arzt, Scr. Metall. 19, 1129 (1985).10.1016/0036-9748(85)90022-5 ↗
43. S. Wiese, M. Roelling, and K.-J. Wolter, Electronic Components and Technology Conference 2, 1272 (2005).
44. A.K. Bhattacharya and W.D. Nix, Int. J. Solids Struct. 24, 1287 (1988).10.1016/0020-7683(88)90091-1 ↗
45. C.A. Schuh, J.K. Mason, and A.C. Lund, Nat. Mater. 4, 617 (2005).10.1038/nmat1429 ↗
46. Z. Ma, S. Belhenini, D. Joly, F. Chalon, R. Leroy, N. Ranganathan, F. Qin, F. Doisseul, 13th International Conference on Electronic Packaging Technology and High Density Packaging (ICEPT-HDP). 1367, 13 (2012).