Electromigration in sputtered copper film on plasma-treated hydrogen silsesquioxane dielectric
Source abstract
Abstract
Electromigration (EM) damage is one of the major causes for the failure of interconnects. Plasma treatment, such as dry etching, is frequently employed in the fabrication of multilevel interconnection patterns. This work investigates the hydrogen silsesquioxane (HSQ) and copper integrated systems and the effect of H2 plasma treatment on the EM of Cu. Hydrogen plasma bombardment induces a rough HSQ surface and results in a coarse morphology of the Cu film deposited on HSQ. The crystallographic texture of Cu is also affected by the plasma treatment. A decrease in the Cu I(111)/I(200) peak ratio is observed for a specimen treated with H2 plasma. The activation energy for EM in Cu and the EM lifetime of the Cu interconnect decreases with an increased degree of plasma treatment. The activation energies obtained, ranging from 0.76 eV to 0.94 eV, suggest that the electromigration in copper proceeds via an interfacial diffusion path. Possible mechanisms for the effects of plasma treatment are explored. The rough surface and the retarded Cu (111) orientation induced by H2 plasma bombardment are the major causes for the decrease of activation energy and EM lifetime.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper Interconnects and Reliability · Semiconductor materials and devices · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. P.J. Ding and W.A. Lanford, J. Appl. Phys. 75, 3627 (1994).10.1063/1.356075 ↗
2. J.W. McPherson, H.A. Lee, and C.D. Grass, Microelectronics Reliability 37, 1469 (1997).10.1016/S0026-2714(97)00089-9 ↗
3. Y.L. Chin, B.S. Chiou, and W.F. Wu, Jpn. J. Appl. Phys. 39, 6708 (2000).10.1143/JJAP.39.6708 ↗
4. Y.L. Chin, B.S. Chiou, and W.F. Wu, Jpn. J. Appl. Phys., 41, 3057 (2002).10.1143/JJAP.41.3057 ↗
5. C.-K. Hu, B. Luther, F.B. Kaufman, J. Hummel, C. Uzoh, and D.J. Pearson, Thin Solid Films 262, 84 (1995).10.1016/0040-6090(94)05807-5 ↗
6. H.W. Wang, B.S. Chiou, and J.S. Jiang, J. Mater. Sci.: Mater. Electronics 10, 267 (1997).
7. M.J. Lobada and G.A. Toskey, Solid State Technol. 41, 99 (1998).
8. P.T. Liu, T.C. Chang, S.M. Sze, F.M. Pan, Y.J. Mei, W.F. Wu, M.S. Tsai, B.T. Dai, C.Y. Chang, F.Y. Shin, and H.D. Huang, Thin Solid Films 32, 345 (1998).10.1016/S0040-6090(98)91041-0 ↗
9. C.R. Viswanathan, Microelectronic Eng. 49, 65 (1999).10.1016/S0167-9317(99)00430-X ↗
10. L. Pantisano, A. Paccagnella, L. Pattarin, A. Scarpa, G. Valentini, L. Bladi, and S. Alba, Microelectronics Reliability 38, 919 (1998).10.1016/S0026-2714(98)00102-4 ↗
11. C.T. Chen and B.S. Chiou, J. Mater. Sci.: Mater. Electronics, 15, 135 (2004).
12. W.L. Sung and B.S. Chiou, J. Electron. Mater. 31, 472 (2002).10.1007/s11664-002-0102-y ↗
13. B.H. Jo and R.W. Vook, Appl. Surf. Sci. 89, 237 (1995).10.1016/0169-4332(95)00044-5 ↗
14. J.R. Lloyd and J.J. Clement, Thin Solid Films 262, 135 (1995).10.1016/0040-6090(94)05806-7 ↗
15. B.H. Jo and R.W. Vook, Thin Solid Films 262, 129 (1995).10.1016/0040-6090(95)05843-5 ↗
16. F. Fantini, J.R. Lloyd, I.D. Munari, and A. Scorzoni, Microelectronic Eng. 40, 207 (1998).10.1016/S0167-9317(98)00272-X ↗
17. J.S. Jiang and B.S. Chiou, J. Mater. Sci.: Mater. Electronics 12, 655 (2001).
18. C. Ryu, A.L.S. Loke, T. Nogami, and S.S. Wong, Proc. 35th Annual Reliability Physics Symp. (New York: IEEE, 1997), p. 201.
19. K. Abe, Y. Harada, and H. Qnoda: Proc. 36th Annual Reliability Physics Symp. (New York: IEEE, 1998), p. 342.
20. H.A. Schafft, IEEE Trans.: Electron Dev. 34, 644 (1987).10.1109/T-ED.1987.22975 ↗