Strength of Soldered Joints Formed under Microgravity Conditions
Source abstract
Abstract
Experiments have been carried out to compare the mechanical strength of joints soldered with Sn-Ag-Cu under different gravitational conditions. Joints soldered under microgravity (produced during a parabolic flight) have lower strength (by 32% in this case) than similar joints formed under normal gravity. Electron microscopy has shown that this is due to a larger volume of residual porosity (14%) in the joints formed in microgravity compared with <1% for joints formed in normal gravity. The residual porosity in joints formed in microgravity is mainly within the bulk of the solder, with some microporosity in the Cu6Sn5 intermetallic layer near the copper interfaces. The porosity not only weakens the joint, but also biases the failure path away from the intermetallic layer and into the bulk of the solder. These observations show that gravitational buoyancy is important for the expulsion of flux and flux residues from soldered joints.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. European Parliament, Directives 2002/95/EC and 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), 2003
2. N.C. Lee, Lead-Free Soldering—Where the World is Going (Indium Corporation of America)
3. B. Huang and N.C. Lee, Prospect of Lead Free Alternatives for Reflow Soldering (Indium Corporation of America)
4. K. Saganuma, Curr. Opin. Solid State Mater. Sci. 5, 55 (2001)10.1016/S1359-0286(00)00036-X ↗
5. Parabolic Flight Campaign with A300-G, User’s Manual (France: Novespace)
6. O. Unal, D.J. Barnard, I.E. Anderson, Scripta Mater. 40, 271 (1999)10.1016/S1359-6462(98)00432-1 ↗
7. O. Unal, I.E. Anderson, J.L. Harringa, R.L. Terpstra, B.A. Cook, J.C. Foley, J. Electron. Mater. 30, 1206 (2001)10.1007/s11664-001-0151-7 ↗
8. M. Arcan, Z. Hashin, A. Voloshin, Exper. Mech. 18, 141 (1978)10.1007/BF02324146 ↗
9. B.A. Cook, I.E. Anderson, J.L. Harringa, R.L. Terpstra, J.C. Foley, O. Unal, F.C. Laabs, J. Elect. Mater. 30, 1214 (2001)10.1007/s11664-001-0152-6 ↗
10. O. Unal, J.C. Foley, J. Mater. Sci. Lett. 20, 1585 (2001)10.1023/A:1017908718111 ↗
11. J.C. Foley, A. Gickler, F.H. Leprevost, D. Brown, J. Elect. Mater. 29, 1258 (2000)10.1007/s11664-000-0021-8 ↗
12. K.H. Prakash, T. Sritharan, Mater. Sci. Eng. A 379, 277 (2004)10.1016/j.msea.2004.02.049 ↗
13. D.-G. Kim, J.-W. Kim, S.-B. Jung, Mater. Sci. Eng. B 121, 204 (2005)10.1016/j.mseb.2005.03.033 ↗
14. C.Y. Liu, M.C. Wang, M.H. Hon, J. Electron. Mater. 33, 1557 (2004)10.1007/s11664-004-0098-6 ↗
15. K.S. Kim, K.W. Ryu, C.H. Yu, J.M. Kim, Microelectron. Reliability 45, 647 (2005)10.1016/j.microrel.2004.07.005 ↗
16. S.C. Hung, K.M. Liechti, J. Compos. Mater. 33, 1288 (1999)10.1177/002199839903301402 ↗