Preparation and Sintering Properties of Ag27Cu2Sn Nanopaste as Die Attach Material
Source abstract
Abstract
Ag27Cu2Sn nanopaste has been prepared by mixing Ag, Cu, and Sn nanoparticles with an organic solvent system. Sintering and mechanical properties of this nanopaste were characterized and investigated. Effects of sintering temperature and time on the sintered microstructure of the nanopaste and shear strength of Cu/Ag27Cu2Sn/Cu structure were analyzed. The results showed that the organic shells coated on the outside of metal nanoparticles could effectively prevent metal nanoparticles from being oxidized below 480°C. When the paste was sintered at 480°C without pressure, few voids or large particles formed within the sintered layer and distributions of Ag, Cu, and Sn were quite uniform. This sintering temperature was much lower than the eutectic temperature (779°C) of Ag-Cu bulk material. Moreover, mutual solid solubilities of Ag and Cu were increased remarkably, which may be caused by high surface activity of Ag and Cu nanoparticles and the important role of the Sn addition. Shear strength of samples with Cu/Ag27Cu2Sn/Cu structure could reach 21 MPa, which could compare with that of Ag nanopaste or conductive adhesives.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Nanomaterials and Printing Technologies · Electrical Contact Performance and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. R. Maboudian, C. Carraro, D.G. Senesky, and C.S. Roper, J. Vac. Sci. Technol., A 31, 050805 (2013).10.1116/1.4807902 ↗
2. M. Willander, M. Friesel, Q. Wahab, and B. Straumal, J. Mater. Sci.: Mater. Electron. 17, 1 (2006).
3. J. Millán, P. Godignon, X. Perpina, A. Pérez-Tomás, and J. Rebollo, IEEE Trans. Power Electr. 29, 2155 (2014).10.1109/TPEL.2013.2268900 ↗
4. L. Ye, K. Ge, W. Qiu, W. Han, and T. Zhao, Mater. Lett. 141, 210 (2015).10.1016/j.matlet.2014.11.076 ↗
5. D.G. Senesky, ECST 50, 233 (2013).
6. J. Glazer, J. Electron. Mater. 23, 693 (1994).10.1007/BF02651361 ↗
7. R.W. Wu, L.C. Tsao, and R.S. Chen, J. Mater. Sci.: Mater. Electron. 26, 1858 (2015).
8. Z. Chen, D. Mochizuki, M.M. Maitani, and Y. Wada, Nanotechnology 24, 265602 (2013).10.1088/0957-4484/24/26/265602 ↗
9. S. Xu, H. Li, L. Wang, Q. Yue, S. Sixiu, and J. Liu, CrystEngComm 16, 9075 (2014).10.1039/C4CE01074D ↗
10. M. Tsuji, S. Hikino, M. Matsunaga, Y. Sano, T. Hashizume, and H. Kawazumi, Mater. Lett. 64, 1793 (2010).10.1016/j.matlet.2010.05.032 ↗
11. Z. Pešina, V. Vykoukal, M. Palcut, and J. Sopoušek, Electron. Mater. Lett. 10, 293 (2014).10.1007/s13391-013-3148-5 ↗
12. G. Zou, J. Yan, F. Mu, A. Wu, J. Ren, A. Hu, and Y.N. Zhou, Open Surf. Sci. J. 3, 70 (2011).10.2174/1876531901103010070 ↗
13. T. Wang, X. Chen, G.Q. Lu, and G.Y. Lei, J. Electron. Mater. 36, 1333 (2007).10.1007/s11664-007-0230-5 ↗
14. H. Jiang, K.S. Moon, J. Lu, and C.P. Wong, J. Electron. Mater. 34, 1432 (2005).10.1007/s11664-005-0202-6 ↗
15. D.V. Quang, P.B. Sarawade, A. Hilonga, J.K. Kim, Y.H. Shim, G.N. Shao, and H.T. Kim, Mater. Lett. 68, 350 (2012).10.1016/j.matlet.2011.10.073 ↗
16. H.S. Chin, K.Y. Cheong, and A.B. Ismail, Metall. Mater. Trans. B 41, 824 (2010).10.1007/s11663-010-9365-5 ↗
17. Y. Morisada, T. Nagaoka, M. Fukusumi, Y. Kashiwagi, M. Yamamoto, and M. Nakamoto, J. Electron. Mater. 39, 1283 (2010).10.1007/s11664-010-1195-3 ↗
18. V.R. Manikam and K.Y. Cheong, IEEE Trans. Comput. Pack. Man 1, 457 (2011).
19. J. Ramyadevi, K. Jeyasubramanian, A. Marikani, G. Rajakumar, and A.A. Rahuman, Mater. Lett. 71, 114 (2012).10.1016/j.matlet.2011.12.055 ↗
20. N.R. Kim, K. Shin, I. Jung, M. Shim, and H.M. Lee, J. Phys. Chem. C 118, 26324 (2014).10.1021/jp506069c ↗
21. A. Muzikansky, P. Nanikashvili, J. Grinblat, and D. Zitoun, J. Phys. Chem. C 117, 3093 (2013).10.1021/jp3109545 ↗
22. M. Tsuji, S. Hikino, R. Tanabe, M. Matsunaga, and Y. Sano, CrystEngComm 12, 3900 (2010).10.1039/c0ce00064g ↗
23. J. Jiu, H. Zhang, S. Koga, S. Nagao, Y. Izumi, and K. Suganuma, J. Mater. Sci.: Mater. Electron. 26, 7183 (2015).
24. Y.W. Yen and S.W. Chen, J. Mater. Res. 19, 2298 (2004).10.1557/JMR.2004.0296 ↗
25. U.R. Kattner, JOM-J. Miner. Met. Mater. Soc. 54, 45 (2002).10.1007/BF02709189 ↗
26. S.M. Feng and G.S. Gu, Mater. Rev. 15, 29 (2001).
27. W.H. Qi and M.P. Wang, J. Mater. Sci. Lett. 21, 1743 (2002).10.1023/A:1020904317133 ↗
28. L.H. Sun, Z.G. Yang, and X.H. Li, Wear 264, 693 (2008).10.1016/j.wear.2007.06.005 ↗
29. K.S. Siow, J. Alloy. Compd. 514, 6 (2012).10.1016/j.jallcom.2011.10.092 ↗
30. H.P. Wu, J.F. Liu, X.J. Wu, M.Y. Ge, Y.W. Wang, G.Q. Zhang, and J.Z. Jiang, Int. J. Adhes. Adhes. 26, 617 (2006).10.1016/j.ijadhadh.2005.10.001 ↗
31. W. Wang, Z. Fu, H. Wang, and R. Yuan, J. Eur. Ceram. Soc. 22, 1045 (2002).10.1016/S0955-2219(01)00424-1 ↗
32. Q.B. Wang, Q.G. Wang, and C.X. Wan, Sci. Sinter. 42, 337 (2010).10.2298/SOS1003337W ↗
33. F.F.Y. Wang, Ceramic Fabrication Processes (New York: Academic Press, 1976), p. 331.