Thermoelectric Properties of an Al-Doped In-Sn-Te-Based Alloy
Source abstract
Abstract
In-Sn-Te-based alloys usually have low electrical and thermal conductivity. In the present work we substituted Al for In in an In-Sn-Te alloy and prepared an (In1.9Al0.1Te3)0.08(SnTe)0.92 alloy by spark plasma sintering. Substitution of Al for In favors the formation of indium impurity levels in this structure and accounts for the decrease of the band gap (E g) and much of the increase of mobility and electrical conductivity. The thermal conductivity decreases from 1.72 W K−1 m−1 to 1.44 W K−1 m−1 with temperature, while that of the (In2Te3)0.08(SnTe)0.92 alloy increases from 2.29 W K−1 m−1 to 3.50 W K−1 m−1. The thermoelectric figure of merit (ZT) of the sample increases with measurement temperature, and the highest ZT value of 0.28 was obtained at 668 K, being a factor of 4.5 greater than the maximum ZT value for the Al-free (In2Te3)0.08(SnTe)0.92 alloy at 510 K.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Thermal Expansion and Ionic Conductivity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. T.C. Harman, P.J. Taylor, M.P. Walsh, and B.E. Laforge, Science 297, 2229 (2002).10.1126/science.1072886 ↗
2. J.P. Heremans, V. Jovovic, E.S. Toberer, A. Saramat, K. Kurosaki, A. Charoenphakdee, S. Yamanaka, and G.J. Snyder, Science 321, 554 (2008).10.1126/science.1159725 ↗
3. H. Fu, P.Z. Ying, J.L. Cui, Y.M. Yan, and X.J. Zhang, Mater. Sci. Forum 650, 126 (2010).10.4028/www.scientific.net/MSF.650.126 ↗
4. R.R. Desai, D. Lakshminarayana, P.B. Patel, P.K. Patel, and C.J. Panchal, Mater. Chem. Phys. 94, 308 (2005).10.1016/j.matchemphys.2005.05.003 ↗
5. K. Kurosaki, H. Matsumoto, A. Charoenphakdee, S. Yamanaka, M. Ishimaru, and Y. Hirotsu, Appl. Phys. Lett. 93, 012101 (2008).10.1063/1.2940591 ↗
6. Y.C. Watanabe, S.C. Kanako, H. Kawazoe, and M. Yamane, Phys. Rev. B 40, 3133 (1989).10.1103/PhysRevB.40.3133 ↗
7. K.S. Liang, A. Bienenstock, and C.W. Bates, Phys. Rev. B 10, 1528 (1974).10.1103/PhysRevB.10.1528 ↗
8. M.L. Li, Concise Handbook of Chemical Data (Beijing: Chemical Engineering Press, 2003), p. 9.
9. J.O. Dimmock, I. Melngailis, and A.J. Strauss, Phys. Rev. Lett. 16, 1193 (1966).10.1103/PhysRevLett.16.1193 ↗
10. K. Hoang, S.D. Mahanti, and P. Jena, Phys. Rev. B 76, 115432 (2007).10.1103/PhysRevB.76.115432 ↗
11. V.V. Gridin, C. Kasl, J.D. Comins, and R. Besermana, J. Appl. Phys. 71, 6069 (1992).10.1063/1.350464 ↗
12. S. Shigetomi, H. Ohkubo, T. Ikari, and H. Nakashima, J. Appl. Phys. 66, 3647 (1989).10.1063/1.344075 ↗
13. V. Jovovic, S.J. Thiagarajan, J.P. Heremans, T. Komissarova, D. Khokhlov, and A. Nicorici, J. Appl. Phys. 103, 053710 (2008).10.1063/1.2890150 ↗
14. H.J. Goldsmid and J.W. Sharp, J. Electron. Mater. 28, 869 (1999).10.1007/s11664-999-0211-y ↗
15. N.F. Mott and E.A. Davis, Electronic Process in Non-Crystalline Materials (London: Oxford University Press, 1971), p. 340.
16. S. Ahmad, K. Hoang, and S.D. Mahanti, Phys. Rev. Lett. 96, 056403 (2006).10.1103/PhysRevLett.96.056403 ↗
17. M. Gao, J.S. Zhang, and D.M. Rowe, eds., The conversion and its application of thermoelectrics (Beijing: Ordnance Industry Press, 1996), p. 53. [in Chinese].
18. J.S. Rhyee, K.H. Lee, S.M. Lee, E. Cho, S.I. Kim, E. Lee, Y.S. Kwon, J.H. Shim, and G. Kotliar, Nature 459, 965 (2009).10.1038/nature08088 ↗
19. J.S. Rhyee, E. Cho, and K.H. Lee, Appl. Phys. Lett. 95, 212106 (2009).10.1063/1.3266579 ↗
20. C. Chiritescu, D.G. Cahill, and N. Nguyen, Science 315, 351 (2007).10.1126/science.1136494 ↗
21. G.J. Snyder and E.S. Toberer, Nat. Mater. 7, 105 (2008).10.1038/nmat2090 ↗