Impact of Thermal, Moisture, and Mechanical Loading Conditions on Interfacial Fracture Toughness of Adhesively Bonded Joints
Source abstract
Abstract
Interfacial delamination is a common failure mode in multilayered IC packages. In this paper, an experimental technique using Brazil-nut specimens is employed to determine the interfacial fracture toughness of an adhesively sandwiched joint with the introduction of edge interfacial crack. The design of experiments (DOE) is applied to study variations in strain rates and the thickness of the sandwich structure. In addition, the effects of moisture content and temperature on the interfacial adhesion are investigated. For the DOEs conducted, as the loading angle increases from 20° to 90°, the interfacial fracture toughness decreases. The fracture toughness and its corresponding mode mixity are determined from the measured critical load by finite element modeling computation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Electronic Packaging and Soldering Technologies · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. J. Duan (Master’s Thesis, Nanyang Technological University, 2002)
2. Allen K.W. (2003) Int. J. Adhes. Adhes. 23:8710.1016/S0143-7496(02)00054-4 ↗
3. T.Y. Wu, Y. Tsukada, and W.T. Chen, 46th ECTC Conf. Proc. (ECTC, 1996), pp. 524–534
4. H.L.J. Pang, X.R. Zhang, C.H. Lim, X.Q. Shi, and Z.P. Wang, 52nd ECTC Conf. Proc. (ECTC, 2002), pp. 1640–1644
5. Adul J., Wang Y., Guo N., Rehman A.U., Chan K.C. (2003) IEEE Trans. Electron. Packag. Manufact. 26:22110.1109/TEPM.2003.820810 ↗
6. Lauke B., Schuller T. (2001) Int. J. Adh. Adh. 21:5510.1016/S0143-7496(00)00028-2 ↗
7. Yao Q., Qu J., Wu J., Wong C.P. (1999) IEEE Trans. Electron. Packag. Manufact. 23:264
8. Volinsky A.A., Moody N.R., Gerberich W.W. (2002) Acta Mater. 50:44110.1016/S1359-6454(01)00354-8 ↗
9. H.L.J. Pang, S.N. Bong, X.Q. Shi, and Z.P. Wang, Proc. Int. Symp. on Electronic Materials and Packaging (2000), pp. 197–200
10. Kuhl A., Qu J. (2000) ASME J. Electron. Packag. 122:14710.1115/1.483147 ↗
11. Wang J.S., Suo Z. (1990) Acta Metall. Mater. 38:127910.1016/0956-7151(90)90200-Z ↗
12. Suo Z., Hutchinson J.W. (1989) Mater. Sci. Eng. 107:13510.1016/0921-5093(89)90382-1 ↗
13. Banks-Sills L., Schwartz J. (2002) Int. J. Fract. 118:19110.1023/A:1022922926897 ↗
14. Modi Mitul B., Sitaraman Suresh K. (2004) Eng. Fract. Mech. 71:121910.1016/S0013-7944(03)00210-8 ↗
15. T.P. Ferguson and J. Qu, 54th ECTC Conf. Proc. (2004), pp. 1752–1757
16. K.C. Chan, T.C. Chai, E.H. Wong, and T.B. Lim, EPTC Conf. Proc. (1998), pp. 331–337
17. E.H. Wong, K.C. Chan, T.Y. Tee, and R. Rajoo, Proc. 3rd IEMT/IMC Symp. (Japan, 1999), pp. 176–181
18. W.H. Wong and L. Cheng, EPTC Conf. Proc. (2000), pp. 277–282
19. S. Luo and C.P. Wong, Proc. Int. Symp. on Electronic Materials and Packaging (2000), pp. 243–250