journal article·2006-05

Electron-beam hardening of thin films of functionalized polynorbornene copolymer

Seongho Park, Jeff Krotine, Sue Ann Bidstrup Allen, Paul A. Kohl

Journal of Electronic Materials· Volume 35· Issue 5
Publisher page

Abstract

Polymers based on norbornene have been used for low-k dielectric materials, advanced photoresists, and as sacrificial materials in the formation buried air-gaps. In this study, the hardness of thin films of butylpolynorbornene-triethoxysilylpolynorbornene copolymer was enhanced by exposure to electron beam radiation. The effect of electron energy, dose, and temperature on the thermal and mechanical properties of the irradiated copolymer films was investigated using dynamic thermal gravimetric analysis and nanoindentation. The hardness of the copolymer thin films was increased by electron beam irradiation; however, the thermal stability was degraded. Electron beam exposure caused bond cleavage that led to beneficial cross linking and subsequent (undesirable) oxidation. The degree of oxidation depends on the electron energy and dose. By using a mixture of 2 vol.% H2 and 98 vol.% N2 as the electron-beam process gas and a post exposure heating in prior to air exposure, the oxidation of the copolymer was reduced, and the thermal stability was improved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. The National Technology Roadmap for Semiconductors (San Jose, CA: Semiconductor Industry Association, 1997).
2. The International Technology Roadmap for Semiconductors (SEMATECH, 2001).
3. N.P. Hacker, G. Davis, L. Figge, and T. Krajewski,Proceedings of the Materials Research Society Symposium on Low Dielectric Constant Materials III, eds., C. Case, P. Kohl, T. Kikkawa, and W. Lee (Warrendale, PA: MRS, 1997), p. 25.
4. P.A. Kohl, D.M. Bhusari, M. Wedlake, C. Case, F.P. Klemens, J. Miner, B.-C. Lee, R.J. Gutmann, and R. Shick,IEEE Electron Device Lett. 21, 557 (2000).10.1109/55.887464 ↗
5. N.R. Grove, P.A. Kohl, S.A. Allen, S. Jayaraman, and R. Shick,J. Polym. Sci. 37, 3003 (1999).10.1002/(SICI)1099-0488(19991101)37:21<3003::AID-POLB10>3.0.CO;2-T ↗
6. J.I. Goldstein, D.E. Newbury, P. Echlin, D.C. Joy, C. Fiori, and E. Lifshin,Scanning Electron Microscopy and X-ray Microanalysis (New York: Plenum Press, 1981).10.1007/978-1-4613-3273-2 ↗
7. J.P. Fouassier and J.F. Rabek,Radiation Curing in Polymer Science and Technology (New York: Elsevier Applied Science, 1993).10.1007/978-94-011-1876-7 ↗
8. R. Manepalli, K.D. Farnsworth, S.A. Bidstrup Allen, and P.A. Kohl,Electrochem. Solid-State Lett. 3, 228 (2000).10.1149/1.1391009 ↗
9. N.R. Manepalli,Electron Beam Curing of Thin Film Polymer Dielectrics (Ph.D. dissertation, Georgia Institute of Technology, 2000).
10. D. Bhusari, H.A. Reed, M. Wedlake, A.M. Padovani, S.A. Bidstrup Allen, and P.A. Kohl,J. Microelectromech. Syst. 10, 400 (2001).10.1109/84.946793 ↗
11. TriboIndenter User’s Manual (Minneapolis, MN: Hysitron Inc., 2001).
12. C. Klapperich, K. Komvopoulos, and L. Pruitt,J. Tribol. 123, 624 (2001).10.1115/1.1330736 ↗
13. F. Rodriquez,Principles of Polymer Science (New York: Hemisphere Publishing Corp., 1989).
14. R.N. Grove,Characterization of Functionalized Polynorbornenes as Interlevel Dielectrics (Ph.D. dissertation, Georgia Institute of Technology, 1997).
15. P. Chiniwalla, Y. Bai, E. Elce, R. Shick, W.C. McDougall, S.A. Bidstrup Allen, and P.A. Kohl,J. Appl. Polym. Sci. 89, 568 (2003).10.1002/app.12234 ↗
16. John Coates,Encyclopedia of Analytical Chemistry (Chichester, U.K.: John Wiley & Sons Ltd., 2000), pp. 10815–10837.
17. D.M. Wedlake and P.A. Kohl,J. Mater. Res. 17, 632 (2002).10.1557/JMR.2002.0090 ↗
18. P.R. Lattimer,J. Anal. Appl. Pyrol. 39, 115 (1997).10.1016/S0165-2370(96)00966-7 ↗