journal article·2002-01

Investigation of coincident site lattice boundary criteria in Cu thin films

Stuart I. Wright

Journal of Electronic Materials· Volume 31· Issue 1
Publisher page

Abstract

A statistical investigation of the coincident site lattice (CSL) Σ=3 boundaries was performed on a Cu thin film sample. The criteria used to judge whether a given boundary is a CSL boundary were evaluated. The misorientation criterion, i.e., how near a given boundary misorientation must lie to an ideal CSL misorientation, was addressed. The results showed that the amount of allowed deviation has little impact on the CSL distribution (within the range of published values for the deviation tolerance). The second criterion addressed was the alignment of the boundary plane with coherent planes in the adjoining grains. Because the measurements were made on single section planes, the orientation of a boundary plane could not be fully measured. Rather, only the orientation of the trace of a boundary plane could be measured. The deviation of the alignment of the boundary traces and the corresponding coherent plane traces were measured. The measurements showed that the choice of a tolerance for the allowed trace deviation was significant.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Copper Interconnects and Reliability · Surface Roughness and Optical Measurements

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. M.L. Kronberg and F.H. Wilson, Trans. TMS-AIME 185, 501 (1949).
2. D.G. Brandon, Acta Metall. 14, 1479 (1966).10.1016/0001-6160(66)90168-4 ↗
3. Y. Ishida and M. McLean, Phil. Mag. 27, 1125 (1973).10.1080/14786437308225821 ↗
4. P.H. Pumphrey, Grain Boundary Structure and Properties (London: Academic Press, 1976), pp. 139–200.
5. O. Khalfallah, Ph.D. thesis, Université de Paris—Sud XI, (1980).
6. G. Palumbo and K.T. Aust, Acta Metall. Mater. 38, 2243 (1990).10.1016/0956-7151(90)90101-L ↗
7. N.C. Krieger Lassen, J. Microsc. 181, 72 (1995).10.1046/j.1365-2818.1996.95376.x ↗
8. D.J. Dingley, Electron Backscatter Diffraction in Materials Science (New York: Kluwer Academic/Plenum Publishers, 2000), pp. 1–18.10.1007/978-1-4757-3205-4_1 ↗
9. T. Watanabe, Boundaries and Interfaces in Materials: The David A. Smith Symposium (Warrendale, PA: TMS, 1998), pp. 19–29.
10. E.M. Lehockey, G. Palumbo, and P. Lin, Boundaries and Interfaces in Materials: The David A. Smith Symposium (Warrendale, PA: TMS, 1998), pp. 45–50.
11. V. Randle, Acta Metall. Mater. 42, 1769 (1994).10.1016/0956-7151(94)90003-5 ↗
12. V. Randle, M. Caul, and J. Fiedler, Microsc. Microanal. 3, 224 (1997).10.1017/S1431927697970173 ↗
13. A. Sekiguchi, J. Koike, S. Kamiya, M. Saka, and K. Maruyama, Appl. Phys. Lett. 79, 1264 (2001).10.1063/1.1399021 ↗
14. B.L. Adams, S.I. Wright, and K. Kunze, Metall. Trans. A 24A, 819 (1993).10.1007/BF02656503 ↗
15. Y. Pan, B.L. Adams, T. Olson, and N. Panayotou, Acta Mater. 44, 4685 (1996).10.1016/S1359-6454(96)00125-5 ↗
16. V. Randle and D.J. Dingley, Scripta Metall. 23, 1565 (1989).10.1016/0036-9748(89)90129-4 ↗
17. D.P. Field and B.L. Adams, Metall. Trans. 23A, 2515 (1991).
18. S. I. Wright and R. J. Larsen, J. Microsc., in press (2002).
19. V. Randle and H. Davies, Ultramicroscopy, in press (2002).
20. K. Kunze, S.I. Wright, B.L. Adams, and D.J. Dingley, Text. Microstr. 20, 41 (1993).10.1155/TSM.20.41 ↗
21. OIM Version 3.0 On-Line Help (Draper, UT: TSL, 2001).