Hygrothermal Delaminations in Lead-Free Solder Reflow of Electronic Packages
Source abstract
Abstract
The use of environmentally friendly lead-free solder in electronic assembly requires a higher process temperatures that double the saturated steam pressure inside the electronic package. We studied the interfacial delamination fractures created by the trapped steam inside the defect voids in packages by computationally modeling the steam diffusion and evaporation processes and the hygrothermal fracture behaviors. These results were compared with results from the conventional saturated steam pressure approach. The comparisons revealed that the saturated steam approach is appropriate for small defects, while the evaporative-diffusion approach is suited for delamination analyses of small and large defects. Our results showed that the strain energy release rate increased with initial defect growth, but reached a defect-size independent plateau when the defect had grown larger than the temperature-dependent critical defect size. To control delamination in packages undergoing lead-free solder reflow, the interfacial fracture energy release rate should be engineered to be above this plateau by controlling the interfacial adhesion, and the applied strain energy release rate should be reduced by reducing the diffusion and evaporation rate of water in the materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Mechanical Behavior of Composites · Electrostatic Discharge in Electronics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. A.A.O. Tay, G.L. Tan, T.B. Lim, IEEE Trans. Compon. Packag. Manufact. Technol., Part B: Adv. Packag. 17, 201, (1994)10.1109/96.330428 ↗
2. L.T. Nguyen, K.L. Chen, J. Schaefer, 45th Electronic Components and Technology Conf., 1995 Proc. (Piscataway, NJ: IEEE Press, 1995), pp. 478-49010.1109/ECTC.1995.515324 ↗
3. R. Gannamani, M. Pecht, IEEE Trans. Compon. Packag. Manufact. Technol., Part A 19, 194 (1996)10.1109/95.506104 ↗
4. A.Y. Kuo, W.T. Chen, L.T. Nguyen, K.L. Chen, G. Slenski, 46th Electronic Components and Technology Conf., 1996 Proc. (Piscataway, NJ: IEEE Press, 1996), pp. 869-874.10.1109/ECTC.1996.550510 ↗
5. R. Munamarty, P. McCluskey, M. Pecht, and L. Yip, Solder. Surf. Mount Technol. 8(1), 46–50 (1996)10.1108/09540919610777591 ↗
6. B.K. Bhattacharyya, W.A. Huffman, W.E. Jahsman, B. Natarajan, Proc. 38th Electron. Comp. Technol. Conf. (Piscataway, NJ: IEEE Press, 1988), pp. 49-58
7. K. Sawada, T. Nakazawa, N. Kawamura, T. Sudo, Proc. Japan Int. Electronic Manufacturing Technology Symp. (Piscataway, NJ: IEEE Press, 1993), p. 29510.1109/IEMT.1993.639774 ↗
8. D.C.C. Lam and J. Wang, IEEE Trans. on Adv. Packag., accepted, (2007)
9. C.Y. Hui, V. Muralidharan, M.O. Thompson, Int. J. Sol. Struct. 42, 1055 (2005)10.1016/j.ijsolstr.2004.06.058 ↗
10. A.A.O. Tay and T.Y. Lin, IEEE Trans. Comp. Packag. Manu., Part A, 19(2), 186–193 (1996)10.1109/95.506103 ↗
11. S. Yi, K.Y. Sze, Fin. Elem. Anal. Des. 30, 65 (1998)10.1016/S0168-874X(98)00027-4 ↗
12. M. Kitano, A. Nishimura, S. Kawai, Reliability Physics Symp., 26th Annual Proc. (Piscataway, NJ: IEEE Press, 1988), p. 90
13. J.I.T. Chong, D.C.C. Lam, P. Tong, Proc. Int. Symp. on Advanced Packaging Materials Processes (Piscataway, NJ: IEEE Press, 2000), pp. 131-134
14. P. Alpern, K.C. Lee, R. Dudek, R. Tilgner, Microelectron. Rel. 40, 1503 (2000)10.1016/S0026-2714(00)00116-5 ↗
15. F. Yang, J. Wang, D.P. Chen, Acta Mechan. Sinica (English Edition) 22, 28 (2006)10.1007/s10409-006-0087-5 ↗
16. D.C.C. Lam, F. Yang, P. Tong, IEEE Trans. Compon. Packag. Technol. 22, 215 (1999)10.1109/6144.774734 ↗
17. S.Y.Y. Leung, D.C.C. Lam, S. Luo, C.P. Wong, J. Adhes. Sci. Technol. 18, 1103 (2004)10.1163/1568561041581306 ↗
18. A.J. Kinloch, Adhesion and Adhesives: Science and Technology (New York: Chapman and Hall, 1987), pp. 264-33410.1007/978-94-015-7764-9_7 ↗
19. E.H. Wong, S.W. Koh, K.H. Lee, K.-M. Lim, T.B. Lim, Y.-W. Mai, IEEE Trans. on Adv. Packag., [see also Compon., Packag. Manufact. Technol., Part B: IEEE Trans on Adv. Packag.,]] 29(4), 751-759 (2006)