Effects of Solder Ball Geometry on Lap Shear Creep Rate
Source abstract
Abstract
Effects of solder ball geometry on lap shear creep deformation were investigated using the three-dimensional (3-D) finite element method (FEM). The meridian of the solder ball before creep, calculated using the energy principle, was very close to the circular arc which was assumed for subsequent calculations. As solder with a given volume and pad area was varied in geometry from convex to concave, lap shear strain rates increased by two to three orders of magnitude, implying that the solder geometry effect must be taken into account for accurate assessment of lap shear results. Finally, a simple method which can handle the solder geometry effect is proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · High Temperature Alloys and Creep · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. A. Schubert, R. Dudek, H. Walter, E. Jung, A. Gollhardt, B. Michel, and H. Reichl, Proceedings of 52nd Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 2002), p. 1246.
2. D.K. Joo and Jin. Yu, Proceedings of 52nd Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 2002), p. 1221.
3. S.W. Shin and J. Yu, J. Electron. Mater. 34, 188 (2005).10.1007/s11664-005-0232-0 ↗
4. M.L. Huang, L. Wang, and C.M.L. Wu, J. Mater. Res. 17, 2897 (2002).10.1557/JMR.2002.0420 ↗
5. C.M.L. Wu and M.L. Huang, J. Electron. Mater. 31, 442 (2002).10.1007/s11664-002-0098-3 ↗
6. M.L. Huang, C.M.L. Wu, and L. Wang, J. Electron. Mater. 34, 11 (2005).10.1007/s11664-005-0193-3 ↗
7. W.J. Plumbridge, C.R. Gagg, and S. Peters, J. Electron. Mater. 30, 1178 (2001).10.1007/s11664-001-0147-3 ↗
8. J. Yu, D.K. Joo, and S.W. Shin, Acta Mater. 50, 4315 (2002).10.1016/S1359-6454(02)00263-X ↗
9. S.W. Shin and J. Yu, Jpn. J. Appl. Phys. 42, 1368 (2003).10.1143/JJAP.42.1368 ↗
10. J.W. Morris Jr, H.G. Song, and F. Hua, Proceedings of IEEE 53rd Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 2003), p. 54.
11. F. Ochoa, J.J. Williams, and N. Chawla, JOM 55, 56 (2003).10.1007/s11837-003-0142-7 ↗
12. J.P. Lucas, F. Guo, J. Mcdougall, T.R. Bieler, K.N. Subramanian, and J.K. Park, J. Electron. Mater. 28, 1270 (1999).10.1007/s11664-999-0167-y ↗
13. I. Dutta, J. Electron. Mater. 32, 201 (2003).10.1007/s11664-003-0210-3 ↗
14. H. Mavoori, J. Chin, S. Vaynman, B. Moran, L. Keer, and M. Fine, J. Electron. Mater. 26, 783 (1997).10.1007/s11664-997-0252-z ↗
15. S. Wiese, E. Meuel, and Klaus-Juergen, Proceedings of IEEE 53rd Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 2003), p. 197.
16. J. Yu, S.W. Shin, and S.B. Kim, Proceedings of IEEE 57th Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 2007), p. 1796.
17. K.A. Brakke, Surface Evolver Manual, Version 2.24 (Selinsgrove, USA: Mathematics Department, Susquehanna University, 2004).
18. W.H. Chen, K.N. Chiang, and S.R. Lin, J. Electron. Packag. 33, 37 (2002).10.1115/1.1401738 ↗
19. T. Siewert, S. Liu, D.R. Smith, and J.C. Madeni, Database for Solder Properties with Emphasis on New Lead-free Solders (Colorado: NIST and Colorado School of Mines, 2002).
20. ABAQUS, Version 6.4 (Pawtucket, Rhode Island: Abaqus Inc.)
21. H. Riedel, Fracture at High Temperatures (Heidelberg: Springer-Verlag, 1987).10.1007/978-3-642-82961-1 ↗
22. M.L. Huang and J. Yu (Unpublished work, KAIST, 2004)