Advanced HiCTE flip chip packaging of 90-nm Cu/Low-K chips: Underfill, novel terminal pad structures, and processing optimization
Source abstract
Abstract
Packaging of 90-nm Cu/Low-K chips presents a serious challenge, which requires an advanced ceramic flip chip solution. Finer Cu interconnects are expected to interact differently with the current underfill-to-die passivation stack-up structures used for Al or previous Cu technology nodes especially in system level applications. Furthermore, the more porous and brittle-proned advanced Low-K (K<3) dielectrics present additional process incompatibility problems such as stress-induced crackings and delaminations. These reliability issues in various stress-relieving passivation structures and materials (i.e., Benzocyclobutene (BCB) and single versus double SiOxNy passivations) have not been extensively studied. This study analyzes the effect of the eight metal layer 90-nm Cu/Low-K flip chip devices through designed experiments using two relatively different underfill materials, standard terminal pad and novel passivation structures, and JEDEC Level-3 reliability stressings: temperature cycling (TC), highly accelerated stress testing (HAST), and high-temperature storage (HTS). Black Diamond Low-K and HiCTE ceramic substrates are employed for the large package form factor. The active Si uses eutectic stencil-pasted SnPb bump and BGA balls with Ti/Ni-V/Al-Cu reflectory thin film-deposited under bump metallurgy (UBM). It is found that the double passivation pad structures are less susceptible to reliability damage for various types of underfills, although a single passivation with BCB coating combined with an optimal underfill can also yield a similar favorable result. The metallurgical effect of delamination cracking, HiCTE flip chip and stress-relieving passivation structures, and the underfill interface failure mode mechanism are examined by functional testing, chemical deprocessings, scanning acoustic microscope (SAM), and scanning electron microscope (SEM)/energy-dispersive x-ray (EDX). The presented results are significant for the development of flip chip packaging technologies for future advanced Cu/Low-K generations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: 3D IC and TSV technologies · Copper Interconnects and Reliability · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Semiconductor Industry Association, International Technology Roadmap for Semiconductors (Austin, TX: ITRS 2003), http://public.itrs.net.
2. A. Braun, Semiconductor Int. 5, 52 (2003).
3. S. Cummings, M. Mills, J. Waeterloos, and D. Scheck, IMAPS Proc. Packaging Copper/Low-K Semiconductors 12, 35 (2003).
4. D.T. Price, R.J. Gutman, and S.P. Murarka, Thin Solid Films 308, 523 (1997).10.1016/S0040-6090(97)00479-3 ↗
5. R.J. Gutman, T.P. Chow, S. Lakshminarayama, D.T. Price, J.M. Steigerwald, L. You, and S.P. Murarka, Thin Solid Films 270, 472 (1995).10.1016/0040-6090(96)80080-0 ↗
6. L.M. Bal, A. Mawer, T. Koschmeider, B. Joiner, and T.M. DeOca, IMAPS Proc. Packaging Copper/Low-K Semiconductors 12, 61 (2003).
7. R. Darveaux and A. Mawer, Proc. SMTA Int. Conf. 10, 26 (2001).
8. S.P. Murarka, I.V. Verner, and R.J. Gutmann, Copper-Fundamental Mechanisms for Microelectronic Applications (New York: Wiley Interscience 2000), pp. 291–317.
9. S. Michaelides and S. K. Sitaraman, IEEE Trans. Adv. Packaging 22, 602 (1999).10.1109/6040.803452 ↗
10. JEDEC, JESD51-6 and JESD51-9 (2004), http://www.jedec.org.
11. B. Pang, W.F. Yau, P. Lee, and M. Naik, Semiconductor Fab. Tech. Int. J. 13, 285 (2003).
12. S. Mihelcic, Adv. Packaging Int. 5, 46 (2004).
13. Kulicke and Soffa, http://www.kns.com.
14. J.D. Wu, C.W. Lee, P.J. Zheng, J.C.B. Lee, and S. Li, IEEE 54th ECTC Proc. 22, 286 (2004).
15. R. Darveaux and A. Mawer, Proc. SMTA Int. Conf. 9, 72 (1995).
16. Sumitomo Bakelite Materials, http://www.sumitomo.com.
17. Namics (Ciba-Geigy) Materials, http://www.namics.com.
18. A. Mawer, T. Koschmieder, and D.H. Popps, Proc. SMTA Int. Conf. 10, 102 (2001).
19. Kyocera Substrate Materials, http://www.kyocera.com.
20. NTK Substrate Materials, http://www.ntk.com.
21. S. Chungpaiboonpatana and F.G. Shi, IEEE Trans. Adv. Packaging 27, 3 (2004).10.1109/TADVP.2004.831828 ↗
22. Flip Chip Technology, http://www.kns.com.
23. Gelease Heat Spreader Attach Material, http://www.gelease.com.
24. Y.H. Pao and E. Eisele, ASME J. Electronic Packaging, 113, 164 (1991).10.1115/1.2905382 ↗