journal article·2008-06

Joint Strength and Microstructure for Sn-Ag-(Cu) Soldering on an Electroless Ni-Au Surface Finish by Using a Flux Containing a Cu Compound

Seishi Kumamoto, Hitoshi Sakurai, Youichi Kukimoto, Katsuaki Suganuma

Journal of Electronic Materials· Volume 37· Issue 6
Publisher page

Abstract

The effect of a flux containing Cu(II) stearate (barrier flux) on the strength of soldered joints between an electroless Ni-Au surface finish and two Pb-free soldering systems, Sn-3Ag-0.5Cu and Sn-3.5Ag (wt.%), was examined. Pull and shock tests showed that barrier flux gave a higher joint strength for both solder compositions than did a flux containing no Cu compounds. Interface analysis revealed that a thin P-rich layer and refined Cu-Ni-Sn intermetallic compounds were formed at the joint interface when barrier flux was used. It is assumed that the supply of Cu from barrier flux suppresses diffusion of Ni into the solder.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Z. Mei, P. Gallery, D. Fisher, F. Hua, J. Glazer, Advances in Electronic Packaging—1997 (New York, NY: ASME 1997) 1543–1550
2. S. Sakatani, Y. Kohara, T. Saeki, K. Uenishi, K.F. Kobayashi, 12th Symposium on Microelectronics, (Osaka: Japan Institute of Electronics Packaging, 2002) 127–130
3. T. Hiramori, M. Ito, M. Yoshikawa, A. Hirose, K.F. Kobayashi, 12th Symposium on Microelectronics, (Osaka: Japan Institute of Electronics Packaging, 2002) 131–134
4. Y. Chonan, T. Komiyama, J. Onuki, R. Uraao, T. Kimura, T. Nagano, Mater. Trans. 43, 1840 (2002)10.2320/matertrans.43.1840 ↗
5. N. Torazawa, S. Arai, Y. Takase, K. Sasaki, H. Saka, J. Jpn. Inst. Met. 66, 1122 (2002)10.2320/jinstmet1952.66.11_1122 ↗
6. C.W. Hwang, K. Suganuma, M. Kiso, S. Hashimoto, J. Mater. Res. 18, 2540 (2003)10.1557/JMR.2003.0354 ↗
7. C.W. Hwang, K. Suganuma, M. Kiso, S. Hashimoto, J. Electron. Mater. 33, 1200 (2004)10.1007/s11664-004-0123-9 ↗
8. Z. Chen, A. Kumar, M. Mona, J. Electron. Mater. 35, 2126 (2006)10.1007/s11664-006-0322-7 ↗
9. T. Hiramori, M. Ito, M. Yoshikawa, A. Hirose, K.F. Kobayashi, J. Jpn. Inst. Electron. Packaging. 6, 503 (2003)10.5104/jiep.6.503 ↗
10. Y. Chonan, T. Komiyama, J. Onuki, Surf. Mt. Technol. 54, 30 (2003)
11. Y. Nakahara, K. Hira, R. Ninomiya, M. Tagami, M. Sugai, Q. J. Jpn. Weld. Soc. 21, 116 (2003)10.2207/qjjws.21.116 ↗
12. T. Hiramori, M. Ito, Y. Tanii, A. Hirose, K.F. Kobayashi, 10th Symposium on Microjoining and Assembly Technology in Electronics (Yokohama: Japan Welding Society, 2004) 165–170
13. K. Yamamoto, H. Akahoshi, T. Kurashina, Y. Nozawa, R. Kimoto, 14th Symposium on Microelectronics, (Osaka: Japan Institute of Electronics Packaging, 2004) 77–80
14. Y.C. Shon, J. Yu, S.K. Kang, D.Y. Shih, and T.Y. Lee, Proceedings of the 55th Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 2005), pp. 83–88
15. Y.D. Jeon, Y.B. Lee, and Y.S. Choi, Proceedings of the 56th Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 2006), pp. 119–124
16. C.E. Ho, S.C. Yang, C.R. Kao, J. Mater. Sci.: Mater. Electron. 18, 155 (2007)10.1007/s10854-006-9031-5 ↗
17. S.W. Chen, C.H. Wang, J. Mater. Res. 21, 2270 (2006)10.1557/jmr.2006.0298 ↗
18. S. Kumamoto, H. Sakurai, K. Ikeda, K. Suganuma, Mater. Trans. 46, 2380 (2005)10.2320/matertrans.46.2380 ↗
19. Y.D. Jeon, K.W. Paik, K.S. Bok, W.S. Choi, and C.L. Cho, Proceedings of the 51th Electronic Components and Technology Conference (Lake Buena Vista, FL: IEEE, 2001), pp. 1326–1332