Hybrid deposition of piezoelectric $$(11\bar 20)$$ MgxZn1−xO (0≤x≤0.3) on $$(01\bar 12)$$ R-sapphire substrates using RF sputtering and MOCVDR-sapphire substrates using RF sputtering and MOCVD
Source abstract
Abstract
MgxZn1−xO (0≤x≤0.3) films are deposited on R-plane \((01\bar 12)\) sapphire substrates using a hybrid deposition technique: metalorganic chemical vapor deposition and radiofrequency (RF) sputtering. Thick piezoelectric MgxZn1−xO films are deposited by RF sputtering on MOCVD grown thin ZnO buffers on R-sapphire substrate. Molar ratio of ZnO and MgO powders are mixed to form MgxZn1−xO (0≤x≤0.3) sputtering targets with NiO (2–3 wt.%) added for compensation doping to achieve piezoelectricity. Field emission scanning electron microscopy shows that the deposited films are dense and uniform. X-ray diffraction indicates that the sputter-deposited MgxZn1−xO (0≤x≤0.3) films retain the wurtzite crystal structure. The crystallinity of the deposited films is further improved by postannealing at 700°C in oxygen. Compositional analysis of the films is carried out using Rutherford back-scattering. High-frequency and low-loss surface acoustic wave (SAW) testing devices fabricated on these films are demonstrated. The SAW properties are tailored to changing Mg compositions. In the ZnO/R-Al2O3 system, two types of wave modes, the Rayleigh-type and the Love-type wave modes, are investigated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Acoustic Wave Resonator Technologies · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. H. Leki and M. Kadota, 1999 IEEE Ultrasonic Symposium (Piscataway, NJ: IEEE, 1999).
2. N.W. Emanetoglu, G. Patounakis, S. Liang, C.R. Gorla, R. Wittstruck, and Y. Lu, IEEE Trans. Ultrason. Ferroelectr. Freq. Contr. 48, 1389 (2001).10.1109/58.949748 ↗
3. W.N. Emanetoglu, S. Muthukumar, P. Wu, R.H. Wittstruck, Y. Chen, and Y. Lu, IEEE Trans. Ultrason. Ferroelectr. Freq. Contr. 50, 537 (2003).10.1109/TUFFC.2003.1201466 ↗
4. A. Ohtomo, K. Tamura, K. Saikusa, K. Takahashi, T. Makino, Y. Segawa, H. Koinuma, and M. Kawasaki, Appl. Phys. Lett. 75, 2635 (1999).10.1063/1.125102 ↗
5. T. Makino, C.H. Chia, N.T. Tuan, H.D. Sun, Y. Segawa, M. Kawasaki, A. Ohtomo, K. Tamura, and H. Koinuma, Appl. Phys. Lett. 77, 975 (2000).10.1063/1.1289066 ↗
6. T. Makino, Y. Segawa, M. Kawasaki, A. Ohtomo, R. Shiroki, K. Tamura, T. Yasuda, and H. Koinuma, Appl. Phys. Lett. 78, 1237 (2001).10.1063/1.1350632 ↗
7. C.R. Gorla, N.W. Emanetoglu, S. Liang, W.E. Mayo, M. Wraback, H. Shen, and Y. Lu, J. Appl. Phys. 85, 2595 (1999).10.1063/1.369577 ↗
8. S. Muthukumar, J. Zhong, Y. Chen, T. Siegrist, and Y. Lu, Appl. Phys. Lett. 82, 742 (2003).10.1063/1.1541950 ↗
9. J. Koike, H. Tanaka, and H. Ieki, Jpn. J. Appl. Phys. 34 (1–5B), 2678 (1995).10.1143/JJAP.34.2678 ↗
10. H. Ieki and H. Tanaka, 1996 IEEE MTT-S Digest 409 (1996).
11. C.R. Gorla, W.E. Mayo, S. Liang, and Y. Lu, J. Appl. Phys. 87, 3736 (2000).10.1063/1.372454 ↗