journal article·2011-09

Enhancement of the Stability of Ti and Ni Ohmic Contacts to 4H-SiC with a Stable Protective Coating for Harsh Environment Applications

Walter Daves, Andreas Krauss, Volker Häublein, Anton J. Bauer, Lothar Frey

Journal of Electronic Materials· Volume 40· Issue 9
Publisher page

Abstract

We report on wafer-level measurements of the long-term stability of Ti and Ni ohmic contacts to n-4H-SiC during thermal treatments in air or air/moisture environments up to 500°C. Contact metallizations with and without a sputtered Ti (20 nm)/TaSix (200 nm)/Pt (150 nm) diffusion barrier stack and Ti (20 nm)/TiN (10 nm)/Pt (150 nm)/Ti (20 nm) interconnects were compared. A protective coating consisting of a SiOx (250 nm)/SiNy (250 nm) stack deposited by plasma-enhanced chemical vapor deposition (PECVD) was used. The stability of the contact metallizations during long-term thermal treatments in air and air/moisture was studied. The best performance was achieved with Ti ohmic contacts without the Ti/TaSix/Pt stack. This system successfully withstood 1000 h thermal treatment at 500°C in air followed by 1000 h at 500°C in air/10% moisture. After the aging, the contact failure ratio was below 1% and the specific contact resistivity amounted to (2.5 ± 1.1) × 10−4 Ω cm2. Scanning electron microscopy (SEM) cross-sectional analysis indicated no degradation in the contact metallization, demonstrating the effectiveness of the SiOx/SiNy protective coating in preventing oxidation of the contacts. These results are very promising for applications in harsh environments, where the stability of ohmic contacts is crucial.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon Carbide Semiconductor Technologies · Semiconductor materials and devices · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. E. Kohn, Comprehensive Microsystems, Vol. 1 (Oxford: Elsevier Science, 2008), pp. 131–173.10.1016/B978-044452190-3.00005-7 ↗
2. R. Cheung, Silicon Carbide Micro Electromechanical Systems for Harsh Environments (London: Imperial College Press, 2006), pp. 128–168.10.1142/9781860949098 ↗
3. G.F. Eriksen and K. Dyrbye, J. Micromech. Microeng. 6, 55 (1996).10.1088/0960-1317/6/1/011 ↗
4. M.T. Soo, K.Y. Cheong, and A.F.M. Noor, Sens. Actuators B 151, 39 (2010).10.1016/j.snb.2010.09.059 ↗
5. R.S. Okojie, D. Spry, J. Krotine, C. Salupo, and D.R. Wheeler, Mater. Res. Soc. Symp. Proc., Vol. 622 (2000), p. T8.3.1–6.
6. R.S. Okojie, D. Lukco, Y.L. Chen, and D.J. Spry, J. Appl. Phys. 91, 6553 (2002).10.1063/1.1470255 ↗
7. R.S. Okojie, D. Lukco, Y.L. Chen, D. Spry, and C. Salupo, Mat. Res. Soc. Symp. Proc. Vol. 640 (2001), p. H7.5.1–6.
8. A. Virshup, L.M. Porter, D. Lukco, K. Buchholt, L. Hultman, and A.L. Spetz, J. Electron. Mater. 38, 569 (2009).10.1007/s11664-008-0609-y ↗
9. S.-W. Lee, E.-K. Suh, N.-K. Cho, H.-D. Park, L. Uneus, and A.L. Spetz, Solid State Electron. 49, 1297 (2005).10.1016/j.sse.2005.06.005 ↗
10. R.M. Tiggelaar, R.G.P. Sanders, A.W. Groenland, and J.G.E. Gardeniers, Sens. Actuators A 152, 39 (2009).10.1016/j.sna.2009.03.017 ↗
11. S.L. Firebaugh, K.F. Jensen, and M.A. Schmidt, J. Microelectromech. Syst. 7, 128 (1998).10.1109/84.661395 ↗
12. W.R. Farner, R. Job, and M. Werner, Microsyst. Technol. 7, 138 (2001).10.1007/s005420100089 ↗
13. W. Daves, A. Krauss, N. Behnel, V. Häublein, A. Bauer, and L. Frey, Thin Solid Films (2011). doi: 10.1016/j.tsf.2011.02.089 .10.1016/j.tsf.2011.02.089 ↗
14. W. Daves, A. Krauss, M. Le-Huu, S. Kronmüller, V. Häublein, A. Bauer, and L. Frey, Mater. Sci. Forum 679–680, 449 (2011).10.4028/www.scientific.net/MSF.679-680.449 ↗
15. G.K. Reeves, Solid State Electron. 23, 487 (1980).10.1016/0038-1101(80)90086-6 ↗
16. D.K. Schroder, Semiconductor Material and Device Characterization (Hoboken, NJ: Wiley, 2006), p. 127.
17. C.A. Hewett, M.J. Taylor, J.F. Zeidler, and M.W. Geis, J. Appl. Phys. 77, 755 (1995).10.1063/1.358996 ↗
18. J.H. Park and P.H. Holloway, J. Vac. Sci. Technol. B 23, 2530 (2005).10.1116/1.2126677 ↗
19. M.H. Ervin, K.A. Jones, U. Lee, and M.C. Wood, J. Vac. Sci. Technol. B 24, 1185 (2006).10.1116/1.2190663 ↗
20. B. Pécz, Appl. Surf. Sci. 184, 287 (2001).10.1016/S0169-4332(01)00678-X ↗
21. M. Siad, C.P. Vargas, M. Nkosi, D. Saidi, N. Souami, N. Daas, and A.C. Chami, Appl. Surf. Sci. 256, 256 (2009).10.1016/j.apsusc.2009.08.011 ↗
22. L.M. Porter and R.F. Davis, Mater. Sci. Eng. B 34, 83 (1995).10.1016/0921-5107(95)01276-1 ↗
23. W.J. Choyke, H. Matsunami, and G. Pensl, Silicon carbide. Recent major advances (Heidelberg: Springer, 2004), pp. 343–366.10.1007/978-3-642-18870-1 ↗
24. B. Pécz, Phys. Stat. Sol. 195, 214 (2003).10.1002/pssa.200306292 ↗