Optimization of pretreatment for liquid-phase deposition of SiO2 on ARTON plastic substrate
Source abstract
Abstract
This study extends our previous work on liquid-phase deposition (LPD) of dense, high-quality, silicon-dioxide (SiO2) films deposited on Si and GaAs substrates from supersaturated, hexafluorosilicic-acid aqueous at near room temperature. Pretreatment to coat the substrate surface with hydroxyl groups was found to be necessary for rapid and high-quality growth. More recent work has extended the range of LPD SiO2 to plastic. The current paper studies optimal LPD pretreatment of a plastic (ARTON) substrate. It is shown that treating ARTON plastic, first, by exposure to oxygen plasma, second, by potassium manganese (KMnO4) etching, and finally, by H2O2 etching, provides the plastic surface with rich OH-radical formation. The resulting SiO2/ARTON film is of good quality and reliability. Deposition rate is up to 659 A/h, and the refractive index is about 1.44 with growth at 40°C. A growth mechanism for LPD-SiO2 deposition on plastic is proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and devices · Thin-Film Transistor Technologies · Optical Coatings and Gratings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. S.K. Park, J.I. Han, W.K. Kim, and M.G. Kwak, Thin Solid Films 397, 49 (2001).10.1016/S0040-6090(01)01489-4 ↗
2. J.Y. Kim, D. Sohn, and E.R. Kim, Appl. Phys. A 72, 699 (2001).10.1007/s003390100853 ↗
3. S.K. Ghandhi, VLSI Fabrication Principles (New York: Wiley, 1983), pp. 236–238.
4. U. Mackens and U. Merkt, Thin Solid Films 97, 53 (1982).10.1016/0040-6090(82)90416-3 ↗
5. A. Mimura, T. Suzuki, N. Konishi, T. Suzuki, and K. Miyata, IEEE Electron Dev. Lett. 9, 290 (1988).10.1109/55.720 ↗
6. L. Messick, J. Appl. Phys. 47, 4949 (1976).10.1063/1.322500 ↗
7. L. Messick, D.L. Lile, and A.R. Clawson, Appl. Phys. Lett. 32, 494 (1978).10.1063/1.90098 ↗
8. L.G. Meiners, Thin Solid Films 52, 201 (1979).10.1016/0040-6090(79)90064-6 ↗
9. J. Stannard and R.L. Henry, Appl. Phys. Lett. 35, 86 (1979).10.1063/1.90903 ↗
10. D. Fritzche, Electron Lett. 14, 51 (1978).10.1049/el:19780037 ↗
11. M.P. Houng, C.J. Huang, Y.H. Wang, N.F. Wang, and W.J. Chang, J. Appl. Phys. 82, 5788 (1997).10.1063/1.366445 ↗
12. M.P. Houng, Y.H. Wang, N.F. Wang, C.J. Huang, and W.J. Chang, Jpn. J. Appl. Phys. 36, L696 (1997).10.1143/JJAP.36.L696 ↗
13. C.J. Huang, M.P. Houng, Y.H. Wang, N.F. Wang, and J.-R. Chen, J. Vac. Sci. Technol. A16, 2646 (1998).10.1116/1.581395 ↗
14. C.J. Huang, J.-R. Chen, and S.P. Huang, Mater. Chem. Phys. 70, 78 (2001).10.1016/S0254-0584(00)00463-6 ↗
15. M.P. Houng, Y.H. Wang, C.J. Huang, S.P. Huang, and J.H. Horng, Solid State Electron. 44, 1917 (2000).10.1016/S0038-1101(00)00178-7 ↗
16. C.J. Huang, J. Electron. Mater. 31, 1309 (2002).10.1007/s11664-002-0113-8 ↗
17. H. Nagayama, H. Honda, and H. Kawahara, J. Electrochem. Soc.: Solid-State Sci. Technol. 135, 2013 (1991).10.1149/1.2096198 ↗
18. Y. Sakai, H. Norimatsu, Y. Saito, H. Inomata, and T. Mizuno, Thin Solid Films 392, 294 (2001).10.1016/S0040-6090(01)01046-X ↗
19. Y. Hara, Rubber Industries 33, 38 (1997).
20. O. Aoki, Opt. Electro-Opt. Eng. Contact 34, 15 (1996).
21. T. Otsuki, Function Mater. 16, 28 (1996).
22. C.J. Huang, M.P. Houng, Y.H. Wang, and H.H. Wang, J. Appl. Phys. 86, 7151 (1999).10.1063/1.371805 ↗
23. H. Xiao, Introduction to Semiconductor Manufacturing Technology (Upper Saddle River, NJ: Prentice Hall, 2001), pp. 365–366.
24. D. Pavia, G.M. Lampman, and G.S. Kriz, Introduction to Spectroscopy (Fort Worth, TX: Harcourt Brace College Publishers, 1996), p. 28.
25. T. Usami, K. Shimokawa, and M. Yoshimatru, Jpn. J. Appl. Phys. 33, 408 (1994).10.1143/JJAP.33.408 ↗