Effects of strain rates and biaxial stress conditions on plastic yielding and flow stress of solder alloys
Source abstract
Abstract
The rate-dependent mechanical properties of Sn3.8Ag0.7Cu (SAC387) Pb-free alloy and Sn-Pb eutectic alloy were investigated in this study under pure shearing and biaxial stress conditions with thin-walled specimens using a servo-controlled tension-torsion material testing system. The pure shearing tests were conducted at strain rates between 6.7 × 10−7 and 1.3 × 10−1/sec. In addition, axial tensile stresses were superimposed onto the shearing samples to examine the effects of biaxial stress conditions on the yielding and on post-yielding plastic flow of the solder alloys. Strain hardening is observed for the Pb-free alloy at all the tested strain rates, while strain softening happens with the Sn-Pb eutectic solder at low strain rates. Special tests were also conducted for sudden strain-rates changes and stress relaxation for the purpose to develop a viscoplastic model to simulate time-dependent multiaxial deformation and to assess damage and fatigue life of general solder interconnections.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · High-Velocity Impact and Material Behavior · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. J. Liang, N. Dariavach, P. Callahan, G. Barr, D. Shangguan, and X. Li (Paper presented at Interpack ’05, The ASME/Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, Optical, and Electronic Systems, San Francisco, CA, 17–22 July 2005).
2. F.P. Beer, E.R. Johnston, Jr., and J.T. Dewolf,Mechanics of Materials (New York: McGraw Hill, 2001).
3. J.S. Hwang,Modern Solder Technology for Competitive Electronics Manufacturing (New York: McGraw Hill, 1996).
4. D.C. Stouffer and L.T. Dame,Inelastic Deformation of Metals: Models, Mechanical Properties, and Metallurgy (New York: John Wiley & Sons, Inc., 1996).
5. J.W. Morris, Jr, H.G. Song and F. Hua,Creep Properties of Pb-free Solder Joints (Paper presented at UCLA Workshop on Pb-Free Solder, September 4–5, 2002).
6. E. Krempl,Mechanical Testing for Deformation Model Development, ASTM STP 765, ed. R.W. Rohde and J.C. Swearenger, (Philadelphia, PA: ASTM, 1982), pp. 5–28.10.1520/STP28877S ↗
7. S.M. Heinrich, S. Shakya, P.S. Lee, and J. Liang, (Paper presented at IMECE2002 ASME International Mechanical Engineering Congress & Exposition, New Orleans, LA, 17–22 November 2002).
8. D. Hull and D.J. Bacon,Introduction to Dislocation, 4th ed. (Oxford, England: Butterworth-Heinemann, 2001).
9. W.G. Johnston and J.J. Gilman,J. Appl. Phys. 30, 129 (1962).10.1063/1.1735121 ↗
10. J. Liang, N. Gollhardt, P.S. Lee, S.A. Schroeder, and W.L. Morris,MRS Symp. Proc. 445, eds. S.K. Groothius, P.S. Ho, K. Ishida, and T. Wu (Pittsburgh, PA: Materials Research Society, 1997), pp. 307–312.