Effects of different printed-circuit-board surface finishes on the formation and growth of intermetallics at thermomechanically fatigued, small outline J leads/Sn-Ag-Cu interfaces
Source abstract
Abstract
The effects of printed-circuit-board (PCB) surface finish and thermomechanical fatigue (TMF) on the formation and growth of intermetallic compounds (IMCs) between small outline J (SOJ) leads and Sn-3.0Ag-0.5Cu solder were investigated. The thickness of the IMC layer formed initially at the as-soldered SOJ/Sn-Ag-Cu interface over a Ni/Au PCB surface finish was about 1.7 times of that over the organic solderability preservative (OSP) PCB surface finish. The parabolic TMF-cycle dependence clearly suggests that the growth processes are controlled primarily by solid-state diffusion. The diffusion coefficient for the growth of the total IMC layer at the SOJ/Sn-Ag-Cu interface over the Ni/Au PCB surface finish is the same as that over the OSP PCB surface finish, and thus, the total IMC layer at the SOJ/Sn-Ag-Cu interface over the Ni/Au PCB surface finish is thicker than that over the OSP PCB surface finish. Using the Cu-Ni-Sn ternary isotherm, the anomalous phenomenon that the presence of Ni retards the growth of the Cu3Sn layer while increasing the initial growth of the Cu6Sn5 layer can be addressed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. D. Lewis, S. Allen, M. Notis, and A. Scotch, J. Electron. Mater. 31, 161 (2002).10.1007/s11664-002-0163-y ↗
2. C. Kanchanomai, Y. Miyashita, and Y. Mutoh, J. Electron. Mater. 31, 456 (2002).10.1007/s11664-002-0100-0 ↗
3. C.E. Ho, R.Y. Tsai, Y.L. Lin, and C.R. Kao, J. Electron. Mater. 31, 584 (2002).10.1007/s11664-002-0129-0 ↗
4. A. Zribi, A. Clark, L. Zavalij, P. Borgresen, and E.J. Cotts, J. Electron. Mater. 30, 1157 (2001).10.1007/s11664-001-0144-6 ↗
5. Y. Kariya, Y. Hirata, and M. Otsuka, J. Electron. Mater. 28, 1263 (1999).10.1007/s11664-999-0166-z ↗
6. Y. Kariya and M. Otsuka, J. Electron. Mater. 27, 1229 (1998).10.1007/s11664-998-0074-7 ↗
7. C. Kanchanomai, Y. Miyashita, and Y. Mutoh, J. Electron. Mater. 31, 142 (2002).10.1007/s11664-002-0161-0 ↗
8. J.G. Lee, F. Guo, S. Choi, K.N. Subramanian, T.R. Bieler, and J.P. Lucas, J. Electron. Mater. 31, 946 (2002).10.1007/s11664-002-0188-2 ↗
9. S. Choi, J.G. Lee, K.N. Subramanian, J.P. Lucas, and T.R. Bieler, J. Electron. Mater. 31, 292 (2002).10.1007/s11664-002-0146-z ↗
10. F. Guo, J. Lee, S. Choi, J.P. Lucas, T.R. Bieler, and K.N. Subramanian, J. Electron. Mater. 30, 1073 (2001).10.1007/s11664-001-0132-x ↗
11. S. Ahat, M. Sheng, and L. Luo, J. Electron. Mater. 30, 1317 (2001).10.1007/s11664-001-0118-8 ↗
12. I.E. Anderson, J.C. Foley, B.A. Cook, J. Harringa, R.L. Terpstra, and O. Unal, J. Electron. Mater. 30, 1050 (2001).10.1007/s11664-001-0129-5 ↗
13. J.H. Lee and D.N. Lee, J. Electron. Mater. 30, 1112 (2001).10.1007/s11664-001-0137-5 ↗
14. W.J. Plumbridge, C.R. Gagg, and S. Peters, J. Electron. Mater. 30, 1178 (2001).10.1007/s11664-001-0147-3 ↗
15. Y. Kariya, T. Morihata, E. Hazawa, and M. Otsuka, J. Electron. Mater. 30, 1184 (2001).10.1007/s11664-001-0148-2 ↗
16. W.K. Choi and H.M. Lee, J. Electron. Mater. 28, 1251 (1999).10.1007/s11664-999-0164-1 ↗
17. A. Zribi et al., IEEE Trans. Comp. Packaging Technol. 23, 383 (2000).10.1109/6144.846778 ↗
18. U. Ray, I. Artaki, G.M. Wenger, and D.A. Machusak, Proc. Surface Mount Int. (Edina, MN: Surface Mount International, 1995), pp. 891–906.
19. M.S. Lee, C.M. Liu, and C.R. Kao, J. Electron. Mater. 28, 57 (1999).10.1007/s11664-999-0195-7 ↗
20. A. Dasgupta, P. Sharma, and K. Upadhyayui, Int. J. Damage Mech. 10, 101 (2001).10.1106/NM1B-1UQH-DJCT-4YH1 ↗
21. Y.H. Pao, S. Badgley, R. Govila, and E. Jih, Fatigue of Electronic Materials, ed. S.A. Schroeder and M.R. Mitchell (Philadelphia, PA: ASTM, 1994), pp. 60–81.10.1520/STP23916S ↗
22. H.L.J. Pang, K.H. Tan, X.Q. Shi, and Z.P. Wang, Mater. Sci. Eng. A307, 42 (2001).10.1016/S0921-5093(00)01958-4 ↗
23. W.W. Lee, L.T. Nguyen, and G.S. Selvaduray, Microelectr. Reliab. 40, 231 (2000).10.1016/S0026-2714(99)00061-X ↗
24. Y. Wu, J.A. Sees, C. Pouraghabagher, L.A. Foster, J.L. Marshall, E.G. Jacobs, and R.F. Pinizzotto, J. Electron. Mater. 22, 769 (1993).10.1007/BF02817353 ↗
25. C.H. Lin, S.W. Chen, and C.H. Wang, J. Electron. Mater. 31, 907 (2002).10.1007/s11664-002-0182-8 ↗
26. A. Zribi, A. Clark, L. Zavalij, P. Borgesen, and E.J. Cotts, J. Electron. Mater. 30, 1157 (2001).10.1007/s11664-001-0144-6 ↗