Effect of Interfacial Reactions on the Reliability of Lead-Free Assemblies after Board Level Drop Tests
Source abstract
Abstract
The reliability of lead-free electronic assemblies after board level drop tests was investigated. Thin small outline package (TSOP) components with 42 FeNi alloy leads were reflow soldered on FR4 printed circuit boards (PCBs) with Sn3.0Ag0.5Cu (wt%) solder. The effects of different PCB finishes [organic solderability preservative (OSP) and electroless nickel immersion gold (ENIG)], multiple reflow (once and three times), and isothermal aging (500 h at 125°C after one time reflow) were studied. The ENIG finish showed better performance than its OSP counterparts. With the OSP finish, solder joints reflowed three times showed obvious improvement compared to those of the sample reflowed once, while aging led to apparent degradation. The results showed that intermetallic compound (IMC) types, IMC microstructure and solder microstructure compete with each other, all playing very important roles in the solder joint lifetime. The results also showed that it is important to specify adequate conditions for a given reliability assessment program, to allow meaningful comparison between results of different investigators.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloy Microstructure Properties · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Y.F. Guo, J.K. Lin, and A.D. Silva, Electronic Components and Technology Conference, (San Diego, CA: IEEE, 2002), pp. 1275–1280.
2. F.A. Stam andE. Davitt, Microelectron. Reliab. 41, 1815 (2001).10.1016/S0026-2714(01)00087-7 ↗
3. D. Wojciechowski, M. Chan, and F. Martone, Microelectron. Reliab. 41, 1829 (2001).10.1016/S0026-2714(01)00089-0 ↗
4. M. Amagai, Microelectron. Reliab. 42, 607 (2002).10.1016/S0026-2714(02)00037-9 ↗
5. P. Ratchev, B. Vandevelde, and I.D. Wolf, IEEE Trans. Device. Mater. Reliab. 4, 5 (2004).10.1109/TDMR.2003.822341 ↗
6. L.H. Xu, J.H.L. Pang, K.H. Prakash, and T.H. Low, IEEE Trans. Compon. Pack. Technol. 28, 408 (2005).10.1109/TCAPT.2005.853593 ↗
7. S.K.W. Seah, C.T. Lim, E.H. Wong, V.B.C. Tan, and V.P.W. Shim, Electronics Packaging Technology Conference, (Singapore: IEEE, 2002), pp. 120–125.
8. E.H. Wong, Y.W. Mai, S.K.W. Seah, R. Rajoo, T.B. Lim, C.T. Lim, and J. Field, Proceedings of High Density Packaging (Shanghai, China: IEEE, 2005), pp. 207–217
9. V.B.C. Tan, M.X. Tong, K.M. Lim, and C.T. Lim, IEEE Trans. Compon. Pack. Technol. 28, 555 (2005).10.1109/TCAPT.2005.848580 ↗
10. Y.Y. Wang, C. Lu, J. Li, X.M. Tan, and Y.C. Tse, Finite. Elem. Anal. Des. 41, 667 (2005).10.1016/j.finel.2004.09.001 ↗
11. L.P. Zhu, Electronic Components and Technology Conference, (New Orleans, LA: IEEE, 2003), pp. 100–104.
12. C.T. Lim, and Y.J. Low, Electronic Components and Technology Conference, (San Diego, CA: IEEE, 2002), pp. 1270–1274.
13. K. Mishiro, S. Ishikawa, M. Abe, T. Kumai, Y. Higashiguchi, and K. Tsubone, Microelectron. Reliab. 42, 77 (2002).10.1016/S0026-2714(01)00230-X ↗
14. T.Y. Tee, H.S. Ng, C.T. Lim, E. Pck, and Z.W. Zhong, Electronic Components and Technology Conference, (New Orleans, LA: IEEE, 2003), pp.121–129.
15. T.Y. Tee, H.S. Ng, C.T. Lim, E. Pek, and Z.W. Zhong, Microelectron. Reliab. 44, 1131 (2004).10.1016/j.microrel.2004.03.005 ↗
16. T.C. Chai, S. Quek, W.Y. Hnin, E.H. Wong, J.L. Chia, Y.Y. Wang, Y.M. Tan, and C.T. Lim, Electronic Components and Technology Conference, (Lake Buena Vista, FL: IEEE, 2005), pp. 630–636.
17. T.C. Chiu, K. Zeng, R. Stierman, D. Edwards, and K. Ano, Electronic Components and Technology Conference, (Las Vegas, NV: IEEE, 2004), pp. 1256–1262.
18. D.Y.R. Chong, K. Ng, Y.N. Tan, P.T.H. Low, J.H.L. Pang, F.X. Che, B.S. Xiong, and L.H. Xu, Electronic Components and Technology Conference, (Lake Buena Vista, FL: IEEE, 2005), pp. 622–629.
19. JEDEC Standard JESD22-B111, Board Level Drop Test Method of Components for Handheld Electronic Products, 2003
20. Y.H. Xia, C.Y. Lu, J.L. Chang, and C.Y. Lu, J. Electron. Mater. 35, 897 (2006)10.1007/BF02692545 ↗
21. J.L. Chang, Y.H. Xia, and X.M. Xie, Proceeding of High Density Packaging (Shanghai, China: IEEE, 2004), pp. 66–69
22. S.J. Wang and C.Y. Liu, J. Electron. Mater. 32, 1303 (2003).10.1007/s11664-003-0027-0 ↗
23. T.L. Shao, T.S. Chen, Y.M. Huang, and C. Chen, J. Mater. Res. 19, 3654 (2004).10.1557/JMR.2004.0478 ↗
24. J.L. Chang (Doctoral Thesis, Chinese Academy of Science, Peoples Republic of China, 2005)
25. S. Nurmi, E. Ristolainen, and J. Sundelin, International Electronic Packaging Technical Conference and Exhibition, (Maui, Hawaii: ASME, 2003), pp. 10–15.
26. T.T. Mattila, V. Vuorinen, and J.K. Kivilahti. J. Mater. Res. 19, 3214 (2004)10.1557/JMR.2004.0436 ↗
27. C.P. Huang, C. Chen, C.Y. Liu, et al., J. Mater. Res. 20, 2772 (2005)10.1557/JMR.2005.0334 ↗
28. K. Zeng, R. Siterman, T.C. Chiu, D. Edwards, K. Ano, and K.N. Tu, J. Appl. Phys. 97, 024508 (2005).10.1063/1.1839637 ↗