journal article·2008-10

Theoretical Prediction and Experimental Measurement of the Degree of Cure of Anisotropic Conductive Films (ACFs) for Chip-On-Flex (COF) Applications

Chang-Kyu Chung, Yong-Min Kwon, Il Kim, Ho-Young Son, Kyo-Sung Choo, Sung-Jin Kim, Kyung-Wook Paik

Journal of Electronic Materials· Volume 37· Issue 10
Publisher page

Abstract

The degree-of-cure of an anisotropic conductive film (ACF) was theoretically predicted and experimentally measured to investigate the effect of the degree-of-cure of the ACF on the electrical and mechanical stability of ACF joints and the reliability of COF assemblies. The cure reaction of the ACF observed by isothermal DSC analysis followed an autocatalytic cure mechanism, and the degree-of-cure of the ACF as functions of time and temperature was mathematically derived from an autocatalytic cure kinetics model. To accurately simulate the ACF temperature field during COF bonding process, the thermal properties of the ACF such as thermal diffusivity (alpha), specific heat capacity (Cp), and thermal conductivity (lambda) were experimentally characterized. The degree-of-cures of the ACF as a function of bonding times during COF bonding process were theoretically predicted by the incorporation of the autocatalytic kinetics modeling and the ACF temperature simulation. The predicted degree-of-cures of the ACF were well matched with the experimental data measured by an ATR/FT-IR analysis. The contact resistances of ACF joints and the peel adhesion strengths of COF assemblies were measured to evaluate the electrical and mechanical interconnection stability. According to the results, the contact resistances decreased and the peel adhesion strength increased as the degree-of-cure increased. In addition, to investigate the effect of the degree-of-cure of the ACF on the reliability of COF assemblies, the 85degC and 85% relative humidity (85degC/85% RH) test was performed. The results showed that the reliability of COF assemblies also strongly depends on the degree-of-cure of the ACF.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Thermal properties of materials · Thermography and Photoacoustic Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. J. Liu, Conductive Adhesive for Electronics Packaging, Electrochemical Publications Ltd., Port Erin, 12–13 (1999)
2. W.S. Kwon, S.J. Ham, M.J. Yim, S.B. Lee, K.W. Paik, J. Electron Packaging 127, 86 (2005) doi: 10.1115/1.184606210.1115/1.1846062 ↗
3. S. Ganesan, M. Pecht, Lead-free Electronics, John Wiley & Sons, New Jersey, 437 (2006)10.1002/047000780X ↗
4. W.S. Kwon, K.W. Paik, Int. J. Adhes. Adhes. 24, 135 (2004) doi: 10.1016/j.ijadhadh.2003.07.00310.1016/j.ijadhadh.2003.07.003 ↗
5. M.J. Rizvi, Y.C. Chan, C. Bailey, H. Lu, A. Sharif, Solder. Surf. Mt. Tech. 17, 40 (2005) doi: 10.1108/0954091051059749210.1108/09540910510597492 ↗
6. M.A. Uddin, M.O. Alam, Y.C. Chan, H.P. Chan, Microelectron. Reliab. 44, 505 (2004) doi: 10.1016/S0026–2714(03)00185-910.1016/S0026-2714(03)00185-9 ↗
7. S.X. Wu, C. Zhang, C.P. Yeh, S. Wille, and K. Wyatt, Proceedings of 47th Electron. Comp. Technol. Conf., 1997, p. 550
8. H. Fukushima, L.T. Drzal, B.P. Rook, M.J. Rich, J. Therm. Anal. Calorim. 85, 235 (2006) doi: 10.1007/s10973-005-7344-x10.1007/s10973-005-7344-x ↗
9. K. Shinzato, T. Bada, J. Therm. Anal. Calorim. 64, 413 (2001) doi: 10.1023/A:101159460952110.1023/A:1011594609521 ↗
10. M. Arasa, X. Ramis, J.M. Salla, A. Mantecón, A. Serra, J. Polym. Sci. A1. 45, 2129 (2007)10.1002/pola.21979 ↗
11. J.Y. Lee, M.J. Shim, S.W. Kim, Mater. Chem. Phys. 48, 36 (1997) doi: 10.1016/S0254-0584(97)80073-910.1016/S0254-0584(97)80073-9 ↗
12. Y.C. Chan, M.A. Uddin, M.O. Alam, H.P. Chan, J. Electron. Mater. 32, 131 (2003) doi: 10.1007/s11664-003-0183-210.1007/s11664-003-0183-2 ↗
13. E.A. Turi, Thermal Characterization of Polymeric Materials, 2nd edn., Academic Press, San Diego, 1609 (1997)
14. R. Agarwal, N.S. Saxena, K.B. Sharma, S. Thomas, M.S. Sreekala, J. Appl. Polym. Sci. 89, 1708 (2003) doi: 10.1002/app.1227610.1002/app.12276 ↗
15. P. Dashora, G. Gupta, Polymer (Guildf.) 37, 231 (1996) doi: 10.1016/0032-3861(96)81092-510.1016/0032-3861(96)81092-5 ↗