High conductivity copper-boron alloys obtained by low temperature annealing
Source abstract
Abstract
The electrical behavior during annealing of copper films with a nominal concentration of 2 at.% boron has been investigated. The evolution of the resistivity of the film was monitored using an in situ technique, in which the film was rampannealed at constant ramp rates. At temperature of 150–200°C, the resistivity of the Cu(B) undergoes a first drop. This is followed by one or two such drops in resistivity, so that after completion of a ramp-anneal from 50°C to 750°C, the room temperature resistivity decreases from the initial value of 13 μΩ cm to 2.1 μΩcm, close to that of bulk copper. Isothermal annealing of the film also leads to substantial decreases in resistivity, from 13 μΩcm to 3 μΩ cm after annealing at 350°C for 8 h and to 2.5 μΩ cm at 400°C for 4 h. These results show that a dramatic reduction in resistivity of Cu(B) alloys takes place at temperatures below 400°C, suggesting possible applications for silicon device interconnections.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper Interconnects and Reliability · Electronic Packaging and Soldering Technologies · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. See, for example, Mater. Res. Soc. Bulletin 19 (1994).
2. J.M.E. Harper and K.P. Rodbell, J. Vac. Sci. Technol. B15, 763 (1997); J.M.E. Harper, C. Cabral Jr., P.C. Andricacos, L. Gignac, I.C. Noyan, K.P. Rodbell, and C.K. Hu, J. Appl. Phys. 86, 2516 (1999).10.1116/1.589407 ↗
3. T.B. Massalski, editor Binary Alloy Phase Diagrams (Materials Park, OH: ASM Int. 1990), pp. 474, 1486.
4. S. Hymes, K.S. Kumar, S.P. Murarka, W. Wang, and W.A. Lanford, Mater. Res. Soc. Symp. Proc., 428, 17 (1996).10.1557/PROC-428-17 ↗
5. J.M.E. Harper, L.A. Clevenger, E.G. Colgan, C. Cabral, {jrJr.}, and B.P. Arcot, Mater. Res. Soc. Symp. Proc. 318, 307 (1994).10.1557/PROC-318-307 ↗
6. H.E. Kissinger, Anal. Chem., 29, 1702 (1957).10.1021/ac60131a045 ↗
7. S.-L. Zhang and F.M. d'Heurle, Thin Solid Films, 256, 155 (1995).10.1016/0040-6090(94)06288-9 ↗
8. K. Barmak, G.A. Lucadamo, C. Cabral, {jrJr.}, C. Lavoie, and J.M.E. Harper, J. Appl. Phys., 87, 2204 (2000).10.1063/1.372162 ↗
9. D.B. Butrymowicz, Diffusion Rate Data and Mass Transport Phenomena for Copper Systems—Part II (Washington, D.C.: Diffusion in Metals Data Center, Metallurgy Division, Institute for Materials Research, National Bureau of Standards, 1981), p. 174.
10. D.B. Butrymowicz, J.R. Manning, and M.E. Read, Diffusion Rate Data and Mass Transport Phenomena for Copper Systems (Washington, D.C.: Diffusion in Metals Data Center, Metallurgy Division, Institute for Materials Research, National Bureau of Standards, 1981), pp. 19, 145.