journal article·2000-06

Variable area MWIR diodes on HgCdTe/Si grown by molecular beam epitaxy

R. Ashokan, N. K. Dhar, B. Yang, A. Akhiyat, T. S. Lee, S. Rujirawat, S. Yousuf, S. Sivananthan

Journal of Electronic Materials· Volume 29· Issue 6
Publisher page

Abstract

Molecular beam epitaxy technique has been used to grow double layer heterostructure mercury cadmium telluride materials on silicon substrates for infrared detection in the mid-wavelength infrared transmission band. Test structures containing square diodes with variable areas from 5.76 × 10−6 cm2 to 2.5×10−3 cm2 are fabricated on them. The p on n planar architecture is achieved by selective arsenic ion implantation. The absorber layer characteristics for the samples studied here include a full width at half maximum of 100–120 arcsec from x-ray rocking curve, the electron concentration of 1−2 × 1015 cm−3 and mobility 3−5 × 104 cm2/V-s, respectively at 80 K from Hall measurements. The minority carrier lifetime measured by photoconductive decay measurements at 80 K varied from 1 to 1.2 µsec. A modified general model for the variable area I–V analysis is presented. The dark current-voltage measurements were carried out at 80 K and an analysis of the dependence of zero-bias impedance on the perimeter/area ratio based on bulk, surface generation-recombination, and lateral currents are presented. The results indicate state-of-the art performance of the diodes in the midwavelength infrared region.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Semiconductor Detectors and Materials · Chalcogenide Semiconductor Thin Films · Semiconductor Quantum Structures and Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. J. Bajaj, Physics of Semiconductor Devices, Vol. 2 (New Delhi, India: Narosha Publishing House, 1998).
2. P. Wijewarnasuriya et al., J. Electron. Mater. 27, 546 (1998).10.1007/s11664-998-0013-7 ↗
3. T.J. de Lyon et al., J. Electron. Mater. 27, 550 (1998).10.1007/s11664-998-0014-6 ↗
4. N.K. Dhar, M. Zandian, J.G. Pasko, J.M. Arias, and J.H. Dinan, Appl. Phys. Lett. 70, 1730 (1997).10.1063/1.118683 ↗
5. S. Rujirawat, L.A. Almeida, Y.P. Chen, S. Sivananthan, and D.J. Smith, Appl. Phys. Lett. 71, 1810 (1997), and references therein.10.1063/1.119406 ↗
6. Xiaohong Shi, S. Rujirawat, R. Ashokan, C.H. Grein, and S. Sivananthan, Appl. Phys. Lett. 73, 638 (1998).10.1063/1.121932 ↗
7. P.S. Wijewarnasuriya, M.D. Lange, S. Sivananthan, and J.P. Faurie, J. Electron. Mater. 24, 545 (1995).10.1007/BF02657961 ↗
8. G.N. Pultz, Peter W. Norton, E. Eric Krueger, and M.B. Reine, J. Vac. Sci. Technol. B9, 1724 (1991).10.1116/1.585406 ↗
9. H.K. Chung, M.A. Rosenberg, and P.H. Zimmermann, J. Vac. Sci. Technol. A3, 189 (1985).10.1116/1.573196 ↗
10. W.C. McLevige, G.M. Williams, R.E. DeWames, J. Bajaj, I.S. Gergis, A.H. Vanderwyck, and E.R. Blazejewski, Semicond. Sci. Technol. 8, 946 (1993).10.1088/0268-1242/8/6S/016 ↗
11. V. Gopal, Semicond. Sci. Technol. 11, 1070 (1996).10.1088/0268-1242/11/7/018 ↗