Influence of alloy composition on fillet-lifting phenomenon in tin binary alloys
Source abstract
Abstract
The influence of the Bi content on the fillet-lifting phenomenon in Sn-3Ag-Bi alloys was investigated. The peculiar composition dependence on the fillet-lifting exists in Sn-3Ag-xBi alloys. With fillet-lifting, they are 3–20%Bi. Without fillet-lifting, they are 0–1%Bi, 30%Bi, and above. This is related to the alloy solidification characteristics, in particular, the amount of latent heat release near the final solidification temperature (solidus temperature) during solidification. Fillet-lifting is likely to occur in the alloy with a latent heat released which is insufficient for alleviation of the temperature gradient in the solder joint. A new predictable index for the occurrence of fillet-lifting is proposed as the fillet-lifting resistant index (FRI) that correlates well with the fillet-lifting occurrence rate. The fillet-lifting does not occur when a solder alloy has a FRI of 0.75 and above. The magnitude of the solidification temperature range (T) does not necessarily correlate with the fillet-lifting, because there are some alloys without fillet-lifting in spite of their having a wide T. There is also little correlation between the fillet-lifting and the formation of a Bi concentration at the solder/Cu land interface, previously thought to cause fillet-lifting. The Bi concentration at the solder/Cu land interface may occur as a consequence of the Sn consumption by the intermetallic compound formation with the Cu dissolving into the molten solder and existing at the interface rather than the solidification segregation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Metallurgical and Alloy Processes · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (7)
Show source-provided references
1. I. Artaki, A.M. Jackson, and P.T. Vianco, J. Electron. Mater 23, 757 (1994).10.1007/BF02651370 ↗
2. J.H. Vincent and G. Humpston, GEC J. Res 11, 76 (1994).
3. I. Artaki, D.W. Finley, A.M. Jackson, and U. Ray, U.S. DOE Rep. SAND-95-1372-C (1995).
4. Lead-FreeSolder Project Final Report, NCMSRep. 0401RE96, NCMS (1997).
5. K. Suganuma, Scr. Mater. 38, 1333 (1998).10.1016/S1359-6462(98)00059-1 ↗
6. J.H. Vincent, B.P. Richards, D.R. Wallis, A. Gunter, M. Warwick, H.A.H. Steen, P.G. Harris, M.A. Whitmore, S.R. Billington, S.R. Billington, A.C. Harman, and E. Knight, Circuit World 19, 32 (1993).10.1108/eb046210 ↗
7. T.B. Massalski, H. Okamoto, P.R. Subramanian, and L. Kacprzak, Binary Alloy, Phase Diagrams Second Edition Plus Updates [CD-ROM] (Materials Park, OH: ASM, 1996).