Curing kinetics of anisotropic conductive adhesive film
Source abstract
Abstract
Polymer-based conductive-adhesive materials have become widely used in many electronic packaging interconnect applications, such as chip-on-glass, chip-on-flex, etc. Among all the conductive-adhesive materials, anisotropic conductive adhesive film (ACF) is an attractive interconnect material because of its fine pitch capability. Anisotropic conductive-adhesive film is a thermosetting, epoxy matrix impregnated with a small amount of electrically conductive particles. During component assembly, the epoxy resin is cured to provide mechanical connection, and the conducting medium provides electrical connection in the z direction. The thermal cure process is critical to develop the ultimate electrical and mechanical properties of the ACF. In this paper, the curing reaction of ACF was studied with a differential scanning calorimeter (DSC) under isothermal conditions in the range of 120–180°C. An autocatalyzed kinetic model was used to describe the curing reaction. The rate constant and the reaction orders were determined and used to predict the progress of the curing reaction. A good agreement is found between the proposed kinetic model and the experimental reaction-rate data. The reaction-rate constants were correlated with the isothermal temperature by the Arrhenius equation. The glass-transition temperature also has been studied as a function of cure degree and moisture absorption.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal and Kinetic Analysis · Epoxy Resin Curing Processes · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. J. Liu, Mater. Technol. 10, 247 (1995).10.1080/10667857.1995.11752642 ↗
2. D.D. Chang, P.A. Crawford, J.A. Fulton, R. Mcbride, M.B. Schmidt, R.E. Sinitski, and C.P. Wong, IEEE Trans. Comp., Packag., Manuf. Technol. 16, 828 (1993).
3. G. Sarker, S. Mridha, T.T. Chong, W.Y. Tuck, and S.C. Kwan, J. Mater. Process. Technol. 89–90, 484 (1999).10.1016/S0924-0136(99)00136-3 ↗
4. Z. Lai and J. Liu, IEEE Trans. Comp., Packag., Manuf. Technol., Part B: Adv. Packag. 19, 644 (1996).10.1109/96.533908 ↗
5. S.X. Wu, C. Zhang, C.P. Yeh, S. Wille, and K. Wyatt, Proc. 47th Electron. Comp. Technol. Conf. (Piscataway, NJ: IEEE, 1997), p. 550.
6. Z. Zhuqing and C.P. Wong, Proc. 8th Int., Symp. Adv. Packag. Mater. (Piscataway, NJ: IEEE, 2002), p. 194.
7. F.Y.C Boey and W. Qiang, Polymer 41, 2081 (2000).10.1016/S0032-3861(99)00409-7 ↗
8. L.F. Yang, K.D. Yao, W.J. Koh, Appl. Polym. Sci. 73, 1501 (1999).10.1002/(SICI)1097-4628(19990822)73:8<1501::AID-APP19>3.0.CO;2-R ↗
9. J.Y. Lee, M.J. Shim, S.W. Kim, Mater. Chem. Phys. 48, 36 (1997).10.1016/S0254-0584(97)80073-9 ↗
10. F. Lin, G.S. Bhatia, and J.D. Ford, Appl. Polym. Sci. 49, 1901 (1993).10.1002/app.1993.070491105 ↗
11. M.R. Keenan, Appl. Polym. Sci. 33, 1725 (1987).10.1002/app.1987.070330525 ↗
12. R.B. Prime, Thermal Characterization of Polymeric Materials, 2nd ed. (New York: Academic Press, 1997), pp. 1598–1603.
13. D.T. Hsu, H.K. Kim, F.G. Shi, H.Y. Tong, S. Chungpaiboonpatana, C. Davidson, and J.M. Adams, Microelectron. J. 31, 271 (2000).10.1016/S0026-2692(99)00143-3 ↗