Anchoring Carbon Nanotubes onto Polyimide-Derived Vertical Carbon as Supporter of Paraffin for Thermal Interface Materials with High Thermal Conductivity
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Phase Change Materials Research · Thermal properties of materials · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. S.A. Mohamed, F.A. Al-Sulaiman, N.I. Ibrahim, M.H. Zahir, A. Al-Ahmed, R. Saidur, B.S. Yılbaş, and A.Z. Sahin, A review on current status and challenges of inorganic phase change materials for thermal energy storage systems. Renew. Sust. Energ. Rev. 70, 1072 (2017).10.1016/j.rser.2016.12.012 ↗
2. Y. Li, X. Li, M.M. Alam, D. Yu, J. Miao, M. Cao, P. Chen, R. Xia, B. Wu, and J. Qian, Incorporating Ag nanowires into graphene nanosheets for enhanced thermal conductivity: implications for thermal management. ACS Appl. Nano Mater. 3, 6061 (2020).10.1021/acsanm.0c01265 ↗
3. J. Pereira da Cunha, and P. Eames, Thermal energy storage for low and medium temperature applications using phase change materials—a review. Appl. Energy 177, 227 (2016).10.1016/j.apenergy.2016.05.097 ↗
4. A. Calderón, A. Palacios, C. Barreneche, M. Segarra, C. Prieto, A. Rodriguez-Sanchez, and A.I. Fernández, High temperature systems using solid particles as TES and HTF material: a review. Appl. Energy 213, 100 (2018).10.1016/j.apenergy.2017.12.107 ↗
5. J. Li, F. Li, X. Zhao, W. Zhang, S. Li, Y. Lu, and L. Zhang, Jelly-inspired construction of the three-dimensional interconnected BN network for lightweight, thermally conductive, and electrically insulating rubber composites. ACS Appl. Electron. Mater. 2, 1661 (2020).10.1021/acsaelm.0c00227 ↗
6. L.-T. Tseng, R.-H. Jhang, J.-Q. Ho, and C.-H. Chen, Molecular approach to enhance thermal conductivity in electrically conductive adhesives. ACS Appl. Electron. Mater. 1, 1890 (2019).10.1021/acsaelm.9b00401 ↗
7. Y. Lin, G. Alva, and G. Fang, Review on thermal performances and applications of thermal energy storage systems with inorganic phase change materials. Energy 165, 685 (2018).10.1016/j.energy.2018.09.128 ↗
8. Y. Liu and Y. Yang, Form-stable phase change material based on Na2CO3·10H2O-Na2HPO4·12H2O eutectic hydrated salt/expanded graphite oxide composite: the influence of chemical structures of expanded graphite oxide. Renew. Energy 115, 734 (2018).10.1016/j.renene.2017.08.097 ↗
9. Z. Rao, T. Xu, C. Liu, Z. Zheng, L. Liang, and K. Hong, Experimental study on thermal properties and thermal performance of eutectic hydrated salts/expanded perlite form-stable phase change materials for passive solar energy utilization. Sol. Energy Mater. Sol. Cells 188, 6 (2018).10.1016/j.solmat.2018.08.012 ↗
10. D. Han, B. Guene Lougou, Y. Xu, Y. Shuai, and X. Huang, Thermal properties characterization of chloride salts/nanoparticles composite phase change material for high-temperature thermal energy storage. Appl. Energy 264, 114674 (2020).10.1016/j.apenergy.2020.114674 ↗
11. Y. Jiang, Y. Sun, M. Liu, F. Bruno, and S. Li, Eutectic Na2CO3-NaCl salt: a new phase change material for high temperature thermal storage. Sol. Energy Mater. Sol. Cells 152, 155 (2016).10.1016/j.solmat.2016.04.002 ↗
12. N. Navarrete, R. Mondragón, D. Wen, M.E. Navarro, Y. Ding, and J.E. Juliá, Thermal energy storage of molten salt-based nanofluid containing nano-encapsulated metal alloy phase change materials. Energy 167, 912 (2019).10.1016/j.energy.2018.11.037 ↗
13. S. Kahwaji, M.B. Johnson, A.C. Kheirabadi, D. Groulx, and M.A. White, A comprehensive study of properties of paraffin phase change materials for solar thermal energy storage and thermal management applications. Energy 162, 1169 (2018).10.1016/j.energy.2018.08.068 ↗
14. X. Zhu, L. Han, F. Yang, J. Jiang, and X. Jia, Lightweight mesoporous carbon fibers with interconnected graphitic walls for supports of form-stable phase change materials with enhanced thermal conductivity. Sol. Energy Mater. Sol. Cells 208, 110361 (2020).10.1016/j.solmat.2019.110361 ↗
15. Y. Zhang, J. Wang, J. Qiu, X. Jin, M.M. Umair, R. Lu, S. Zhang, and B. Tang, Ag-graphene/PEG composite phase change materials for enhancing solar-thermal energy conversion and storage capacity. Appl. Energy 237, 83 (2019).10.1016/j.apenergy.2018.12.075 ↗
16. S. Puupponen and A. Seppälä, Cold-crystallization of polyelectrolyte absorbed polyol for long-term thermal energy storage. Sol. Energy Mater. Sol. Cells 180, 59 (2018).10.1016/j.solmat.2018.02.013 ↗
17. Y. Zhu, S. Liang, H. Wang, K. Zhang, X. Jia, C. Tian, Y. Zhou, and J. Wang, Morphological control and thermal properties of nanoencapsulated n-octadecane phase change material with organosilica shell materials. Energy Conver. Manag. 119, 151 (2016).10.1016/j.enconman.2016.04.049 ↗
18. H. Peng, D. Zhang, X. Ling, Y. Li, Y. Wang, Q. Yu, X. She, Y. Li, and Y. Ding, n-Alkanes phase change materials and their microencapsulation for thermal energy storage: a critical review. Energy Fuels 32, 7262 (2018).10.1021/acs.energyfuels.8b01347 ↗
19. A. Bashiri Rezaie and M. Montazer, Shape-stable thermo-responsive nano Fe3O4/fatty acids/PET composite phase-change material for thermal energy management and saving applications. Appl. Energy 262, 114501 (2020).10.1016/j.apenergy.2020.114501 ↗
20. J. Giro-Paloma, M. Martínez, L.F. Cabeza, and A.I. Fernández, Types, methods, techniques, and applications for microencapsulated phase change materials (MPCM): A review. Renew. Sust. Energ. Rev. 53, 1059 (2016).10.1016/j.rser.2015.09.040 ↗
21. L. Zhang, K. Zhou, Q. Wei, L. Ma, W. Ye, H. Li, B. Zhou, Z. Yu, C.-T. Lin, J. Luo, and X. Gan, Thermal conductivity enhancement of phase change materials with 3D porous diamond foam for thermal energy storage. Appl. Energy 233–234, 208 (2019).10.1016/j.apenergy.2018.10.036 ↗
22. X. Zhu, Q. Wang, S. Kang, J. Li, and X. Jia, Coal-based ultrathin-wall graphitic porous carbon for high-performance form-stable phase change materials with enhanced thermal conductivity. Chem. Eng. J. 395, 125112 (2020).10.1016/j.cej.2020.125112 ↗
23. J. Yang, L.-S. Tang, L. Bai, R.-Y. Bao, Z. Liu, B.-H. Xie, M.-B. Yang, and W. Yang, Photodriven shape-stabilized phase change materials with optimized thermal conductivity by tailoring the microstructure of hierarchically ordered hybrid porous scaffolds. ACS Sustain. Chem. Eng. 6, 6761 (2018).10.1021/acssuschemeng.8b00565 ↗
24. Q. Zhang and J. Liu, Sebacic acid/CNT sponge phase change material with excellent thermal conductivity and photo-thermal performance. Sol. Energy Mater. Sol. Cells 179, 217 (2018).10.1016/j.solmat.2017.11.019 ↗
25. M. Maleki, A. Imani, R. Ahmadi, H. Banna Motejadded Emrooz, and A. Beitollahi, Low-cost carbon foam as a practical support for organic phase change materials in thermal management. Appl. Energy 258, 114108 (2020).10.1016/j.apenergy.2019.114108 ↗
26. X. Guo, S. Zhang, and J. Cao, An energy-efficient composite by using expanded graphite stabilized paraffin as phase change material. Comp. Part A: Appl. Sci. Manuf. 107, 83 (2018).10.1016/j.compositesa.2017.12.032 ↗
27. J. Liu, Q. Wang, Z. Ling, X. Fang, and Z. Zhang, A novel process for preparing molten salt/expanded graphite composite phase change blocks with good uniformity and small volume expansion. Sol. Energy Mater. Sol. Cells 169, 280 (2017).10.1016/j.solmat.2017.05.046 ↗
28. H. Ye, H. Wen, J. Chen, P. Zhu, M.M.F. Yuen, X.-Z. Fu, R. Sun, and C.-P. Wong, Alumina-coated Cu@Reduced graphene oxide microspheres as enhanced antioxidative and electrically insulating fillers for thermal interface materials with high thermal conductivity. ACS Appl. Electron. Mater. 1, 1330 (2019).10.1021/acsaelm.9b00312 ↗
29. C. Amaral, R. Vicente, P.A.A.P. Marques, and A. Barros-Timmons, Phase change materials and carbon nanostructures for thermal energy storage: a literature review. Renew. Sust. Energ. Rev. 79, 1212 (2017).10.1016/j.rser.2017.05.093 ↗
30. M. Li and B. Mu, Effect of different dimensional carbon materials on the properties and application of phase change materials: a review. Appl. Energy 242, 695 (2019).10.1016/j.apenergy.2019.03.085 ↗
31. Z. Han and A. Fina, Thermal conductivity of carbon nanotubes and their polymer nanocomposites: a review. Prog. Polym. Sci. 36, 914 (2011).10.1016/j.progpolymsci.2010.11.004 ↗
32. X. Yang, C. Liang, T. Ma, Y. Guo, J. Kong, J. Gu, M. Chen, and J. Zhu, A review on thermally conductive polymeric composites: classification, measurement, model and equations, mechanism and fabrication methods. Adv. Comp. Hyb. Mater. 1, 207 (2018).10.1007/s42114-018-0031-8 ↗
33. J. Li, X. Zhao, W. Wu, Z. Zhang, Y. Xian, Y. Lin, Y. Lu, and L. Zhang, Advanced flexible rGO-BN natural rubber films with high thermal conductivity for improved thermal management capability. Carbon 162, 46 (2020).10.1016/j.carbon.2020.02.012 ↗
34. W.-L. Song, P. Wang, L. Cao, A. Anderson, M.J. Meziani, A.J. Farr, and Y.-P. Sun, Polymer/boron nitride nanocomposite materials for superior thermal transport performance. Angew. Chem. Int. Ed. 51, 6498 (2012).10.1002/anie.201201689 ↗
35. M. Cao, J. Shu, P. Chen, R. Xia, B. Yang, J. Miao, and J. Qian, Orientation of boron nitride nanosheets in CM/EPDM Co-continuous blends and their thermal conductive properties. Polym. Test. 69, 208 (2018).10.1016/j.polymertesting.2018.05.028 ↗
36. L. Han, X. Jia, Z. Li, Z. Yang, G. Wang, and G. Ning, Effective encapsulation of paraffin wax in carbon nanotube agglomerates for a new shape-stabilized phase change material with enhanced thermal-storage capacity and stability. Ind. Eng. Chem. Res. 57, 13026 (2018).10.1021/acs.iecr.8b02159 ↗
37. J.-H. Jing, H.-Y. Wu, Y.-W. Shao, X.-D. Qi, J.-H. Yang, and Y. Wang, Melamine foam-supported form-stable phase change materials with simultaneous thermal energy storage and shape memory properties for thermal management of electronic devices. ACS Appl. Mater. Interfaces 11, 19252 (2019).10.1021/acsami.9b06198 ↗
38. X. Zhang, R. Wen, Z. Huang, C. Tang, Y. Huang, Y. Liu, M. Fang, X. Wu, X. Min, and Y. Xu, Enhancement of thermal conductivity by the introduction of carbon nanotubes as a filler in paraffin/expanded perlite form-stable phase-change materials. EnergyBuild 149, 463 (2017).
39. M. Li, A nano-graphite/paraffin phase change material with high thermal conductivity. Appl. Energy 106, 25 (2013).10.1016/j.apenergy.2013.01.031 ↗
40. G. Qi, J. Yang, R. Bao, D. Xia, M. Cao, W. Yang, M. Yang, and D. Wei, Hierarchical graphene foam-based phase change materials with enhanced thermal conductivity and shape stability for efficient solar-to-thermal energy conversion and storage. Nano Res. 10, 802 (2017).10.1007/s12274-016-1333-1 ↗
41. W. Wu, W. Wu, and S. Wang, Form-stable and thermally induced flexible composite phase change material for thermal energy storage and thermal management applications. Appl. Energy 236, 10 (2019).10.1016/j.apenergy.2018.11.071 ↗
42. W. Aftab, A. Mahmood, W. Guo, M. Yousaf, H. Tabassum, X. Huang, Z. Liang, A. Cao, and R. Zou, Polyurethane-based flexible and conductive phase change composites for energy conversion and storage. Energy Stor. Mater. 20, 401 (2019).
43. M. Liu, C. Zhang, Z. Du, and W. Zou, Fabrication of shape-stabilized phase change materials with melamine foam/multi-walled carbon nanotubes composite as container. Comp. Interfaces 28, 255 (2021).10.1080/09276440.2020.1763151 ↗
44. S. Bao, Q. Wei, J. Cao, H. Li, L. Ma, J. An, C.-T. Lin, J. Luo, and K. Zhou, Hydrophilic modification of carbon nanotube to prepare a novel porous copper network-carbon nanotube/erythritol composite phase change material. Comp. Interfaces 28, 175 (2021).10.1080/09276440.2020.1740520 ↗
45. H. Li, F. Yang, D. Guo, L. Han, T. Chen, and X. Jia, Lightweight and flexible phase change materials for thermal management with integrated rapid heating and cooling functions. J. Electron. Mater. 52, 6009 (2023).10.1007/s11664-023-10542-3 ↗
46. H.X. Zhang, J.J. Dai, C.X. Sun, S.Y. Li, H.L. Zhang, H.J. Yu, and C.Z. Chen, Wear rate and thermal conductivity of a copper-plated graphite flake/aluminum composite. J. Electron. Mater. 48, 7585 (2019).10.1007/s11664-019-07546-3 ↗