journal article·2020-06

Mass Transport, Creep and Zero-Stress-Point Shifting in a Nano-silver Die-Attach Material During Thermal Cycling

J. R. McCoppin, D. Young

Journal of Electronic Materials· Volume 49· Issue 6
Publisher page

Abstract

We present a detailed study of thermal cycling from room temperature to 300°C of nano-silver materials for high-power electronics die-attach applications. Under typical consolidation conditions, silicon/nano-silver bimorph curvature measurements show a zero-stress point of 276°C. Thermal cycling above and below this temperature resulted in cyclic compressive and tensile stresses accompanied by relaxation and creep. A significant zero-stress-point shift of 100°C was observed. Annealing experiments revealed an activation energy of 0.26 ± 0.08 eV, which suggests that surface diffusion may be the dominant transport mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · Silicon Carbide Semiconductor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. P. Neudeck and R. Okojie, Proc. IEEE 90, 6 (2002).10.1109/JPROC.2002.1021571 ↗
2. N. Wright, A. Horsfall, and K. Vassilevski, Mater. Today 11, 16 (2008).10.1016/S1369-7021(07)70348-6 ↗
3. J. Hudgins, S. Member, G. Simin, E. Santi, and M. Khan, Power 18, 3 (2003).
4. J. Bai, J. Calata, and G. Lu, IEEE Trans. Electron. Packag 30, 4 (2007).10.1109/TADVP.2007.911244 ↗
5. G. Bai, Doctoral Thesis, Virginia Polytechnic Institute and State University (2005).
6. H. Zhang, Y. Liu, L. Wang, F. Sun, J. Fan, M. Placette, X. Fan, and G. Zhang, IEEE Trans. Compon. Packag Manuf. Technol. 9, 963 (2018).10.1109/TCPMT.2018.2884032 ↗
7. Z. Zhang, C. Chen, Y. Yang, H. Zhang, D. Kim, T. Sugahara, S. Nagao, and K. Suganuma, J. Alloys Compd. 780, 435 (2019).10.1016/j.jallcom.2018.11.251 ↗
8. G. Chen, X. Sun, P. Nie, Y. Mei, G. Lu, and X. Chen, J. Electron. Mater. 41, 4 (2012).
9. Y. Mei, G. Chen, L. Quan, and X. Chen, Int. J. Adhes. Adhes. 35, 88 (2012).10.1016/j.ijadhadh.2011.12.010 ↗
10. J. McCoppin, T. Reitz, R. Miller, H. Vijwani, S. Mukhopadhyay, and D. Young, J. Electron. Mater. 43, 9 (2014).10.1007/s11664-014-3257-4 ↗
11. J. Bai, Z. Zhang, J. Calata, and G. Lu, Packaging 29, 3 (2006).
12. L. Jiang, Doctoral Thesis, Virginia Polytechnic Institute and State University (2010).
13. T. Pieńkos, L. Gładyszewski, A. Prószyński, D. Chocyk, G. Gładyszewski, F. Martin, C. Jaouen, M. Drouet, and B. Lamongie, Vacuum 70, 2 (2003).10.1016/S0042-207X(02)00650-4 ↗
14. M. Finot, S. Suresh, C. Bull, and S. Sampath, Mater. Sci. Eng. A 205, 59 (1996).10.1016/0921-5093(95)09892-5 ↗
15. A. Witvrouw and F. Spaepen, J. Appl. Phys. 73, 11 (1993).10.1063/1.354025 ↗
16. J. McCoppin, Doctoral Thesis, Wright State University (2013).
17. S. Timoshenko, J. Opt. Soc. Am. 11, 233 (1925).10.1364/JOSA.11.000233 ↗
18. P. Gadaud, V. Caccuri, D. Bertheau, J. Carr, and X. Milhet, Mater. Sci. Eng. A 669, 379 (2016).10.1016/j.msea.2016.05.108 ↗
19. V. Krstic, U. Erb, and G. Palumbo, Scr. Metall. Mater. 29, 3 (1993).10.1016/0956-716X(93)90344-R ↗
20. N. Wang, Z. Wang, K. Aust, and U. Erb, Acta Metall. Mater. 43, 2 (1995).
21. H. Kim and M. Bush, Nanostruct. Mater. 11, 3 (1999).
22. D. Weiss, H. Gao, and E. Arzt, Acta Mater. 49, 13 (2001).10.1016/S1359-6454(01)00168-9 ↗
23. Y. Mei, Solder. Surf. Mt. Technol. 25, 2 (2013).10.1108/09540911311309077 ↗
24. M. Kobrinsky and C. Thompson, Acta Mater. 48, 3 (2000).10.1016/S1359-6454(99)00403-6 ↗
25. M. Thouless, J. Vac. Sci. Technol. A 14, 4 (1996).10.1116/1.580036 ↗
26. Y. Okada and Y. Tokumaru, J. Appl. Phys. 56, 314 (1984).10.1063/1.333965 ↗
27. K. Asaoka and N. Kuwayama, Dent. Mater. J. 9, 45 (1990).
28. P. Flinn, D. Gardner, and W. Nix, IEEE Trans. Electron. Dev. 34, 3 (1987).10.1109/T-ED.1987.22981 ↗
29. G. Dieter, Mechanical Metallurgy, 3rd ed. (New York: McGraw-Hill, 1986), pp. 428–430.
30. A. Meyers and K. Chawla, Mechanical Metallurgy (Englewood Cliffs: Prentice-Hall, 1984), pp. 672–673.
31. W. Nix, Met. Trans. A 20A, 2217 (1989).10.1007/BF02666659 ↗
32. G. Antczak and G. Ehrlich, Surface Diffusion, 1st ed. (New York: Cambridge University Press, 2010), pp. 207–211.10.1017/CBO9780511730320 ↗
33. T. Chookajorn, H. Murdoch, and C. Schuh, Science 337, 951 (2012).10.1126/science.1224737 ↗
34. A. Li and I. Szlufarska, J. Mater. Sci. 52, 8 (2017).
35. M. Saber, H. Kotan, C. Koch, and R. Scattergood, J. Appl. Phys. 113, 6 (2013).10.1063/1.4791704 ↗
36. Y. Chen, N. Gao, G. Sha, S. Ringer, and M. Starink, Acta Mater. 109, 202 (2016).10.1016/j.actamat.2016.02.050 ↗