journal article·2006-06

Effects of a-Si:H resist vacuum-lithography processing on HgCdTe

R. N. Jacobs, E. W. Robinson, M. Jaime-Vasquez, A. J. Stoltz, J. Markunas, L. A. Almeida, P. R. Boyd, J. H. Dinan, L. Salamanca-Riba

Journal of Electronic Materials· Volume 35· Issue 6
Publisher page

Abstract

A vacuum-compatible process for carrying out lithography on Hg1−xCdxTe and CdTe films was previously demonstrated. It was shown that hydrogenated amorphous silicon (a-Si:H) could be used as a dry resist by projecting a pattern onto its surface using excimer laser irradiation and then developing that pattern by hydrogen plasma etching. Pattern transfer to an underlying Hg1−xCdxTe film was then carried out via Ar/H2 plasma etching in an electron cyclotron resonance (ECR) reactor. Despite the successful demonstration of pattern transfer, the possibility of inducing harmful effects in the Hg1−xCdxTe film due to this vacuum lithography procedure had not been explored. Here we present structural and surface compositional analyses of Hg1−xCdxTe films at key stages of the a-Si:H vacuum lithography procedure. X-ray diffraction double crystal rocking curves taken before and after a-Si:H deposition and after development etching were identical, indicating that bulk structural changes in the Hg1−xCdxTe film are not induced by these processes. Cross-section transmission electron microscopy studies show that laser-induced heating in the 350 nm thick a-Si:H overlayer is not sufficient to cause structural damage in the underlying Hg1−xCdxTe surface. In vacuo surface analysis via Auger electron spectroscopy and ion scattering spectroscopy suggest that the hydrogen plasma development process produces Hg-deficient surfaces but does not introduce C contamination. However, after ECR plasma etching into the Hg1−xCdxTe film, the measured x value is much closer to that of the bulk.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Laser Material Processing Techniques · Advanced Semiconductor Detectors and Materials · Surface Roughness and Optical Measurements

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. R.E. Hollingsworth, C. Dehart, J.N. Li Wang, J.N. Johnson, J.D. Benson, and J.H. Dinan, J. Electron. Mater. 27, 689 (1998).10.1007/s11664-998-0037-z ↗
2. R.N. Jacobs, A.J. Stoltz, E.W. Robinson, P.R. Boyd, L.A. Almeida, J.H. Dinan, and L. Salamanca-Riba, J. Electron. Mater. 33, 538 (2004).10.1007/s11664-004-0043-8 ↗
3. R.N. Jacobs, A.J. Stoltz, J.H. Dinan, and L. Salamanca-Riba, J. Vac. Sci. Technol. B 22, 1071 (2004).10.1116/1.1752906 ↗
4. J.D. Benson, A.J. Stoltz, A.W. Kaleczyc, M. Martinka, L.A. Almeida, P.R. Boyd, and J.H. Dinan, J. Electron. Mater. 31, 822 (2002).10.1007/s11664-002-0244-y ↗
5. R.N. Jacobs, (Ph.D. Thesis, University of Maryland, College Park, MD, 2005), pp. 106–108.
6. K. Shiralagi and R. Tsui, Appl. Phys. Lett. 74, 886 (1999).10.1063/1.123399 ↗
7. R. Fedosejevs and M.J. Brett, Appl. Opt. 28, 1877 (1989).10.1364/AO.28.001877 ↗
8. R. Cerny and P. Prikryl, Phys. Rev. B: Condens. Matter Mater. Phys. 57, 194 (1998).10.1103/PhysRevB.57.194 ↗
9. A.J. Stoltz, M. Jaime-Vasquez, J.D. Benson, J.B. Varesi, and M. Martinka, (in this issue).
10. J.D. Benson et al, in this issue.
11. A.J. Stoltz, J.D. Benson, J.B. Varesi, M. Martinka, M.J. Sperry, A.W. Kaleczyc, L.A. Almeida, P.R. Boyd, and J.H. Dinan, J. Electron. Mater. 33, 684 (2004).10.1007/s11664-004-0067-0 ↗
12. P. Lengsfeld, N.H. Nickel, and W. Fuhs, Appl. Phys. Lett. 76, 1680 (2000).10.1063/1.126134 ↗
13. R.N. Jacobs, unpublished data.
14. T. Aoki and D.J. Smith, Appl. Phys. Lett. 82, 2275 (2003).10.1063/1.1566462 ↗
15. R.A. Street, Hydrogenated Amorphous Silicon (Cambridge, UK: Cambridge University Press, 1991), pp. 37–39.10.1017/CBO9780511525247 ↗
16. J.C. Knights and R.A. Lujan, Appl. Phys. Lett. 35, 244 (1979).10.1063/1.91086 ↗