journal article·2025-06Open access

Fe-Si-Cr Alloy–Ni-Cu-Zn Ferrite Composite Multilayer Inductors: Fabrication, Co-firing, and Magnetic Performance

Hsing-I Hsiang, Yu-Chun Hsu, Wen-Hsi Lee, Christoph Priese, Jörg Töpfer

Journal of Electronic Materials· Volume 54· Issue 6

Abstract

Abstract Fe-Si-Cr alloy powders exhibit higher saturation magnetization than Ni-Cu-Zn ferrites and have gradually replaced Ni-Cu-Zn ferrites in power inductors. However, the low resistivity of Fe-Si-Cr alloys results in a lower component breakdown voltage. Furthermore, during the sintering process, the surface of the Fe-Si-Cr alloy powders will form a dense chromium oxide layer and interact with the silver internal electrodes, resulting in the discontinuity of the internal electrodes. In this study, a new type of multilayer power inductor based on a Fe-Si-Cr alloy/Ni-Cu-Zn ferrite composite design is proposed. The effect of co-firing temperature and uniaxial pressure during pressure-assisted constrained sintering of the multilayer composite power inductors on the densification and microstructures of the Fe-Si-Cr and Ni-Cu-Zn ferrite layers was investigated. The composite inductors were sintered at about 900°C and 1 MPa in a nitrogen atmosphere, resulting in significant Ag migration. It was found that silver diffusion could be effectively prevented by reducing the sintering temperature to 800°C. Inductance at 1 MHz of about 0.25 μH, a quality factor of about 9, and rated current of about 2.25 A were obtained for a multilayer power inductor with dimensions of 10 x 10 x 2.8 mm3 sintered at 800°C and 3 MPa in a nitrogen atmosphere. Graphical Abstract
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic Properties of Alloys · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. H.I. Hsiang, Progress in materials and processes of multilayer power inductors. J. Mater. Sci.: Mater. Electron. 31, 16089 (2020).
2. J. He, H. Yuan, M. Nie, H. Guo, H. Yu, Z. Liu, and R. Sun, Soft magnetic materials for power inductors: state of art and future development. Mater. Today Electr. 6, 100066 (2023). https://doi.org/10.1016/j.mtelec.2023.100066.10.1016/j.mtelec.2023.100066 ↗
3. J. Mürbe and J. Töpfer, Ni-Cu-Zn ferrites for low temperature firing: I. ferrite composition and its effect on sintering behavior and permeability. J. Electroceram 15, 215 (2005).10.1007/s10832-005-3278-8 ↗
4. J. Mürbe and J. Töpfer, Low temperature sintering of sub-stoichiometric Ni–Cu–Zn ferrites: shrinkage, microstructure and permeability. J. Magn. Magn. Mater. 324, 578 (2012). https://doi.org/10.1016/j.jmmm.2011.08.040.10.1016/j.jmmm.2011.08.040 ↗
5. Y. Zhang, X. Tang, W. Xiaohui, J. Chen, Y. Jing, and S. Hua, Effect of Bi2O3 and Co2O3 co-doping on power loss characteristics of low-temperature-fired NiCuZn ferrites. J. Magn. Magnetic Mater. (2022). https://doi.org/10.1016/j.jmmm.2022.169368.10.1016/j.jmmm.2022.169368 ↗
6. H.I. Hsiang, C.C. Chen, and W.C. Kuo, Micro-channel formation on NiCuZn ferrite green sheets prepared by hot embossing. Ceram. Int. 43, 13853 (2017). https://doi.org/10.1016/j.ceramint.2017.07.108.10.1016/j.ceramint.2017.07.108 ↗
7. K. Shiroki, K. Kawano, H. Matsuura, and H. Kishi, New type metal composite material for SMD power inductor. J. Jpn. Soc. Powder Metall. 61(S1), S242 (2014). https://doi.org/10.2497/jjspm.61.S242.10.2497/jjspm.61.S242 ↗
8. H.I. Hsiang, S.M. Yang, and C.C. Chen, Effects of CuO content in the glass on the interfacial reaction for the NiCuZn ferrites-FeSiCr alloy composites. Int. J. Appl. Glass Sci. 11, 774 (2020). https://doi.org/10.1111/ijag.15512.10.1111/ijag.15512 ↗
9. H.I. Hsiang, L.F. Fan, and K.T. Ho, Minor yttrium nitrate addition effect on FeSiCr alloy powder core electromagnetic properties. J. Magn. Magn. Mater. 444, 1 (2017). https://doi.org/10.1016/j.jmmm.2017.07.09.10.1016/j.jmmm.2017.07.09 ↗
10. H.-I. Hsiang, L.-F. Fan, and K.-T. Ho, Relationship between the microstructure and magnetic properties of Fe-Si-Cr powder cores. IEEE Trans. Magn. 54, 1 (2018). https://doi.org/10.1109/TMAG.2018.2792433.10.1109/TMAG.2018.2792433 ↗
11. C. Priese and J. Töpfer, Oxidation behavior, insulation resistance and permeability of FeSiCr alloys. Alloys 1, 288 (2002). https://doi.org/10.3390/alloys1030019.10.3390/alloys1030019 ↗
12. P. Wang, Z. Zhu, J. Liu, C. Wang, J. Pang, and J. Zhang, Industrial-scale fabrication of FeSiCr magnetic powder cores with high magnetic permeability and low loss. J. Alloys Compd 962, 171095 (2023). https://doi.org/10.1016/j.jallcom.2023.171095.10.1016/j.jallcom.2023.171095 ↗
13. W. Yung-Ping and H.-I. Hsiang, Sintering temperature and atmosphere effects on electric and magnetic properties of multilayer FeSiCr alloy inductors. Mater. Sci. Eng.: B 275, 115523 (2022). https://doi.org/10.1016/j.mseb.2021.115523.10.1016/j.mseb.2021.115523 ↗
14. H.I. Hsiang and J.F. Chueh, Low-pressure-assisted constrained sintering of low-temperature-fire NiCuZn ferrites. Intl. J. Appl. Ceram. Techn. 12, E194 (2015). https://doi.org/10.1111/ijac.12300.10.1111/ijac.12300 ↗
15. J. Wu, X. Wei, W. Li, W. Xiang, S. He, and X. Fan, Study of the effect of atmosphere sintering on the performance of multilayer chip power inductors. J. Magn. Magn. Mater. 592, 171815 (2024). https://doi.org/10.1016/j.jmmm.2024.171815.10.1016/j.jmmm.2024.171815 ↗
16. C. Priese and J. Töpfer, Phase formation, microstructure, and permeability of Fe-deficient Ni-Cu-Zn ferrites (II): effect of oxygen partial pressure. Magnetochemistry 10, 97 (2024). https://doi.org/10.3390/magnetochemistry10120097.10.3390/magnetochemistry10120097 ↗
17. H. Naghib-Zadeh, G. Oder, J. Hesse, T. Reimann, J. Töpfer, and T. Rabe, Effect of oxygen partial pressure on co-firing behavior and magnetic properties of LTCC modules with integrated NiCuZn ferrite layers. J. Electroceram. 37, 100 (2016). https://doi.org/10.1007/s10832-016-0043-0.10.1007/s10832-016-0043-0 ↗
18. I. Karakaya and W.T. Thompson, The Ag-O system. J. Phase Equilibria 13, 137 (1992).10.1007/BF02667476 ↗
19. J. Sanchez, J. Stark, and V. Moruzzi, First-principles calculation of the Ag-Cu phase diagram. Phys. Rev. B 44, 5411 (1991).10.1103/PhysRevB.44.5411 ↗
20. H. Su, X. Tang, H. Zhang, Y. Jing, and Z. Zhong, Effect of Nb2O5 on DC-bias-superposition characteristics of the low-temperature fired NiCuZn ferrites. IEEE Trans. Magn. 49, 4222 (2013). https://doi.org/10.1109/TMAG.2013.2243702.10.1109/TMAG.2013.2243702 ↗