journal article·2021-12

Electrical Conductivity and Dielectric Properties of Zirconia-Based SOFC Electrolytes Processed by Microwave and Conventional Sintering

Amit Sharma, Payal Sharma, Kanchan L Singh

Journal of Electronic Materials· Volume 50· Issue 12
Publisher page

Abstract

The study of a.c. conductivity and dielectric properties of materials is important in obtaining new materials with pre-determined properties for their various applications in fuel cell technology. In this work, the precursors of zirconia-based ceramic oxides with compositions Zr0.90Y0.06Ce0.02X0.02O2-δ (X= Ca, Fe, La, Sr, and Mg) were prepared by the mixed oxide method. All the precursors were ball milled for 6 h in an acetone medium. The calcination of these powdered samples was done at 600°C in an electric furnace and calcined powders were then pelletized. Sintering of the sample pellets was done in a microwave furnace at 1400°C for 20 min and in a conventional furnace for 6 h at the same temperature. The structural properties, a.c. conductivity and the dielectric properties of these samples were studied in a frequency range from 20 Hz to 2 MHz. The a.c. conductivity of all the samples was found to increase with an increase in frequency. The variation of dielectric response factors such as dielectric constant and loss tangent with frequency has also been explored in this work. Among all the prepared samples, the microwave sintered Zr0.90Y0.06Ce0.02Ca0.02O2-δ sample shows maximum electric conductivity at 800 K.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microwave-Assisted Synthesis and Applications · Advancements in Solid Oxide Fuel Cells · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. S. Anirban, and A. Dutta, RSC Adv. 5, 95736 (2015).10.1039/C5RA20251E ↗
2. D. Pathania, and D. Singh, I. J Theoretical App. Sci. 1, 34 (2009).
3. A. Hunt, J. Non-Cryst. Solids 220, 1 (1997).10.1016/S0022-3093(97)00191-9 ↗
4. M. Purnima, A. Edukondalu, G. Prasad, K. Siva Kumar, and S. Rahman, Phys. Chem. Glasses: Eur. J. Glass Sci. Technol. B. 57, 198 (2016).
5. G. Srinivasarao, and N. Veeraiah, J. Alloys Compd. 327, 52 (2001).10.1016/S0925-8388(01)01559-6 ↗
6. B.V. Ragavaiah, C. Laxmikanth, and N. Veeriah, Opt. Commun. 235, 341 (2004).10.1016/j.optcom.2004.02.082 ↗
7. H. Naceur, A. Megriche, and M. El Maaoui, Orient. J. Chem 29, 937 (2013).10.13005/ojc/290311 ↗
8. P. Lunkenheimer, and A. Loidl, Phys. Rev. Lett. 91, 207601 (2003).10.1103/PhysRevLett.91.207601 ↗
9. H.M. Gomaa, J. Non-Cryst. Solids 481, 51 (2018).10.1016/j.jnoncrysol.2017.10.012 ↗
10. D. Pathania, and D. Singh, I. J. Th Appl. Sci. 1, 34 (2009).
11. M. Zhang, D. Wang, L. Miao, Z. Jin, K. Dong, and W. Liu, Electrochem. Commun. 126, 107026 (2021).10.1016/j.elecom.2021.107026 ↗
12. S. Huangang, S. Chao, R. Ran, C. Jiafeng, and S. Zongping, Prog. Nat. Sci. 30, 764 (2020).10.1016/j.pnsc.2020.09.003 ↗
13. S. Jain, and V. Agarwal, IEEE Trans. Energy Convers. 23, 622 (2008).10.1109/TEC.2008.918631 ↗
14. P. Sharma, K.L. Singh, and A.P. Singh, Nanotrends J. Nanotechnol. Appl. 17, 33 (2015).
15. R. Fernández-González, T. Molina, S. Savvin, R. Moreno, A. Makradi, and P. Núñez, Ceram. Int. 40, 14253 (2014).10.1016/j.ceramint.2014.06.015 ↗
16. A. Weber, and E. Ivers-Tiffée, J. Power Sources 127, 273 (2004).10.1016/j.jpowsour.2003.09.024 ↗
17. J.B. Goodenough, Annu. Rev. Mater. Res. 33, 91 (2003).10.1146/annurev.matsci.33.022802.091651 ↗
18. S.P.S. Badwal, Solid State Ion. 52, 23 (1992).10.1016/0167-2738(92)90088-7 ↗
19. A.M. Azad, S. Larose, and S.A. Akbar, J. Mater. Sci. 29, 4135 (1994).10.1007/BF00414192 ↗
20. M. Biswas, and K.C. Sadanala, J. Powder Metall Min. 2, 2 (2013).
21. P. Sharma, K.L. Singh, A.P. Singh, C. Sharma, and S. Mago, Trans. Ind. Ceram. Soc. 78, 1 (2019).10.1080/0371750X.2019.1578695 ↗
22. Z.G. Lv, P. Yao, R.S. Guo, and F.Y. Dai, Mater. Sci. Eng. 458, 355 (2007).10.1016/j.msea.2006.12.072 ↗
23. D. Ridder, M.V. Welzenis, R.G. Brongersma, and U. Kreissig, Solid State Ion. 158, 67 (2003).10.1016/S0167-2738(02)00759-2 ↗
24. G.K. Meenashisundaram, T.H.D. Ong, G. Parande, V. Manakari, S. Xiang, and M. Gupta, J. Rare Earths 35, 23 (2017).
25. D.J. Kim, J Am. Ceram. Soc. 72, 1415 (1989).10.1111/j.1151-2916.1989.tb07663.x ↗
26. R. Gerhardt, A.S. Nowick, M.E. Mochel, and I. Dumler, J Am. Ceram. Soc. 69, 647 (1986).10.1111/j.1151-2916.1986.tb07465.x ↗
27. K. Tanwar, N. Jaiswal, D. Kumar, and O. Parkash, J. Alloys Compd. 684, 683 (2016).10.1016/j.jallcom.2016.05.223 ↗
28. T.S. Zhang, J. Ma, Y.J. Leng, S.H. Chan, P. Hing, and J.A. Kilner, Solid State Ion. 168, 87 (2004).
29. H. Yamamura, E. Katoh, M. Ichikawa, K. Kakinuma, T. Mori, and H. Haneda, Electrochemistry 68, 455 (2000).10.5796/electrochemistry.68.455 ↗
30. D.E. Clark, and W.H. Sutton, Annu. Rev. Mater. Sci. 26, 299 (1996).10.1146/annurev.ms.26.080196.001503 ↗
31. R.R. Mishra, and A.K. Sharma, Compos. Part A Appl. Sci. Manuf. 81, 78 (2016).10.1016/j.compositesa.2015.10.035 ↗
32. A. Goldstein, N. Travitzky, A. Singurindy, and M. Kravchuk, J Eur. Ceram. Soc. 19, 2067 (1999).10.1016/S0955-2219(99)00020-5 ↗
33. S. Bodhak, S. Bose, and A. Bandyopadhyay, J. Am. Ceram. Soc. 94, 32 (2011).10.1111/j.1551-2916.2010.04062.x ↗
34. G. Sethi, A. Upadhyaya, and D. Agrawal, Sci. Sinter. 35, 49 (2003).10.2298/SOS0302049S ↗
35. D. Agrawal, J. Cheng, H. Peng, L. Hurt, and K. Cherian, Am. Ceram. Soc. Bull. 87, 39 (2008).
36. P. Sharma, K.L. Singh, A.P. Singh, C. Sharma, and S. Mago, J. Electron. Mater. 48, 3527 (2019).10.1007/s11664-019-07094-w ↗
37. T. Hiratoko, A. Yoneda, and M. Osako, Ceram. Int. 40, 12471 (2014).10.1016/j.ceramint.2014.04.101 ↗
38. M.T. Vinas, F. Zhang, J. Vleugels, and M. Anglada, J. Eur. Ceram. Soc. 38, 2621 (2018).10.1016/j.jeurceramsoc.2017.12.053 ↗
39. F. Yuan, J. Wang, H. Miao, C. Goo, and W.G. Wang, J. Alloys Compd. 549, 200 (2013).10.1016/j.jallcom.2012.09.089 ↗
40. S.P. Miller, B.I. Dunlap, and A.S. Fleisher, Solid State Ion. 253, 130 (2013).10.1016/j.ssi.2013.08.042 ↗
41. H. Birey, J. Appl. Phys. 49, 2898 (1978).10.1063/1.325174 ↗
42. R.L. Grosso, and E.N.S. Muccillo, J. Power Sources 233, 6 (2013).10.1016/j.jpowsour.2013.01.140 ↗
43. S. Anirban, and A. Dutta, Int. J. Hydrog. Energy 43, 23418 (2018).10.1016/j.ijhydene.2018.10.219 ↗
44. D.W. Davidson, R.P. Auty, and R.H. Cole, Rev. Sci. Instrum. 22, 678 (1951).10.1063/1.1746034 ↗
45. G.E. McDuffie Jr., and T.A. Litovitz, J. Chem. Phys. 37, 1699 (1962).10.1063/1.1733360 ↗
46. H. Assad, and M. Kharroubi, J. Non-Cryst. Solids 560, 120721 (2021).10.1016/j.jnoncrysol.2021.120721 ↗
47. G. Jayamol, S.S. Bhagawan, and S. Thomas, J. Polym. Eng. 17, 383 (1997).10.1515/POLYENG.1997.17.5.383 ↗