Ohmic Curing of Silver Micro-Particle Inks Printed on Thermoplastics
Source abstract
Abstract
The ohmic curing of two silver micro-particle inks was studied. Silver lines of 35 to 75 µm thick were printed on a mixture of polycarbonate and acrylonitrile butadiene styrene (PC+ABS) substrate and on a mineral reinforced Nylon 6 thermoplastic, using a laboratory-made system based on a volumetric dosing dispenser. After 48 h of stabilization in ambient conditions, a current is applied through the printed lines with an imposed intensity value and application time in order to cure the silver inks. Evolutions of the temperature and the resistivity of silver tracks were followed during the process. Printed thermoplastics were characterized at the end of the process in order to check the absence of deformation due to the curing treatment. The study showed that the ohmic curing led to better electrical performances than an oven process with a considerable time saving. Most of the printed line resistivity drop occurred in the first 30 s of the treatment. The ohmic curing induced a local increase of temperature located in the printed line and avoided damaging the substrates, which makes the process compatible with thermal sensitive substrates. Therefore, the ohmic curing is an efficient low-cost process to cure silver micro-particle inks that could be easily implemented at an industrial scale.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · nanoparticles nucleation surface interactions · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. M. Dyson, K. Ghaffarzadeh, Flexible Hybrid Electronics 2020–2030: Applications, Challenges, Innovations and Forecasts. IDTechEx Research. (2020)
2. K. Ghaffarzadeh, R. Collins, In-Mold Electronics 2020–2030: Technology, Market Forecasts, Players. IDTechEx Research. (2020)
3. W. Wu, Nanoscale 9, 7342 (2017).10.1039/C7NR01604B ↗
4. I. Reinhold, C.E. Hendriks, R. Eckardt, J.M. Kranenburg, J. Perelaer, R.R. Baumann, and U.S. Schubert, J. Mater. Chem. 19, 3384 (2009).10.1039/b823329b ↗
5. B. Polzinger, F. Schoen, V. Matic, J. Keck, H. Willeck, W. Eberhardt, H. Kueck, UV-sintering of inkjet-printed conductive silver tracks. in 2011 11th IEEE International Conference on Nanotechnology, IEEE, Portland, OR, USA. vol. 201 (2011).10.1109/NANO.2011.6144541 ↗
6. M.K. Kim, J.Y. Hwang, H. Kang, K. Kang, S.-H. Lee, S.-J. Moon, Laser sintering of the printed silver ink. in 2009 IEEE International Symposium on Assembly and Manufacturing, IEEE, Seoul, South Korea. Vol. 155 (2009)10.1109/ISAM.2009.5376912 ↗
7. K.A. Schroder, S.C. McCool, and W.F. Furlan, NSTI-Nanotech 3, 198 (2006).
8. V. Thenot, Impression et recuits sélectifs d’encres métalliques sur papier – Optimisation des propriétés électriques de boucles RFID-HF en vue d’une production industrielle, PhD. thesis. (2017)
9. M. Allen, A. Alastalo, M. Suhonen, T. Mattila, J. Leppaniemi, and H. Seppa, IEEE Trans. Microwave Theory Techn. 59, 1419 (2011).10.1109/TMTT.2011.2123910 ↗
10. M.L. Allen, M. Aronniemi, T. Mattila, A. Alastalo, K. Ojanperä, M. Suhonen, and H. Seppä, Nanotechnology 19, 175201 (2008).10.1088/0957-4484/19/17/175201 ↗
11. P. Escobedo, M.A. Carvajal, J. Banqueri, A. Martinez-Olmos, L.F. Capitan-Vallvey, and A.J. Palma, IEEE Access 7, 1909 (2019).10.1109/ACCESS.2018.2887113 ↗
12. O. Kravchuk, Y. Bobitski, M. Reichenberger, Electrical sintering of inkjet printed sensor structures on plyimide substrate. in 2016 IEEE 36th International Conference on Electronics and Nanotechnology (ELNANO), IEEE, Kyiv, Ukraine, vol. 104 (2016)10.1109/ELNANO.2016.7493022 ↗
13. O. Kravchuk, Y. Bobitski, M. Reichenberger, Laser curing of inkjet printed strain gauge structures. in MIXDES - 23rd International Conference Mixed Design of Integrated Circuits and Systems, IEEE, Lodz, Poland, vol. 343 (2016)10.1109/MIXDES.2016.7529761 ↗
14. H. Lee, D. Kim, I. Lee, Y.-J. Moon, J.-Y. Hwang, K. Park, and S.-J. Moon, Jpn. J. Appl. Phys. 53, 05HC07 (2014).10.7567/JJAP.53.05HC07 ↗
15. J. Perelaer, M. Klokkenburg, C.E. Hendriks, and U.S. Schubert, Adv. Mater. 21, 4830 (2009).10.1002/adma.200901081 ↗
16. W. Luo, W. Hu, and S. Xiao, J. Phys. Chem. C 112, 2359 (2008).10.1021/jp0770155 ↗
17. Ph. Buffat, and J.-P. Borel, Phys. Rev. A 13, 2287 (1976).10.1103/PhysRevA.13.2287 ↗
18. F.Liwei, Laser curing of inks for Plastic Electronic Applications. University of Liverpool PhD. thesis. (2014)
19. D.A. Roberson, R.B. Wicker, L.E. Murr, K. Church, and E. MacDonald, Materials 4, 963 (2011).10.3390/ma4060963 ↗
20. J. Niittynen, R. Abbel, M. Mäntysalo, J. Perelaer, U.S. Schubert, and D. Lupo, Thin Solid Films 556, 452 (2014).10.1016/j.tsf.2014.02.001 ↗
21. A.J. Lopes, I.H. Lee, E. MacDonald, R. Quintana, and R. Wicker, J. Mater. Process. Technol. 214, 1935 (2014).10.1016/j.jmatprotec.2014.04.009 ↗
22. H.W. Tan, N. Saengchairat, G.L. Goh, J. An, C.K. Chua, and T. Tran, Adv. Mater. Technol. 5, 1900897 (2020).10.1002/admt.201900897 ↗
23. D.A. Roberson, R.B. Wicker, and E. MacDonald, J. Electr. Mater. 41, 2553 (2012).10.1007/s11664-012-2140-4 ↗
24. B. Niese, U. Urmoneit, P. Amend, S. Roth, M. Schmidt, Laser Sintering of Silver Ink for Generation of Embedded Electronic Circuits in Stereolithography Parts. in Lasers in Manufacturing Conference (2015)
25. F. Tricot, C. Venet, D. Beneventi, D. Curtil, D. Chaussy, T.P. Vuong, J.E. Broquin, and N. Reverdy-Bruas, RSC Adv. 8, 26036 (2018).10.1039/C8RA03380C ↗
26. J. Perelaer, C. Hendriks, A.W.M. de Laat, and U.S. Schubert, Nanotechnoloy 20, 165303 (2009).10.1088/0957-4484/20/16/165303 ↗
27. B. Wałpuski, and M. Słoma, Adv. Eng. Mater. 23, 2001085 (2021).10.1002/adem.202001085 ↗
28. K.C. Yung, X. Gu, C.P. Lee, and H.S. Cho, Ink-jet printing and camera flash sintering of silver tracks on different substrates J. Mater. Process. Technol. 210, 2268 (2010).10.1016/j.jmatprotec.2010.08.014 ↗