journal article·2021-06

Effects of Temperature and Agitation Time of Triethanolamine as a Complexing Agent in Production of Tin Sulfide Thin Films by CBD

C. A. Meza Avendaño, J. Pantoja Enríquez, J. Conde

Journal of Electronic Materials· Volume 50· Issue 6
Publisher page

Abstract

The effects of the temperature and agitation time of the complexing agent on the structural, morphological, compositional, and optical properties of SnS films deposited by chemical bath deposition (CBD) have been studied. The properties of the thin films were studied by X-ray diffraction (XRD) analysis, X-ray fluorescence spectroscopy, atomic force microscopy, and ultraviolet–visible–near infrared (UV–Vis–NIR) spectroscopy. The XRD results confirmed formation of polycrystalline films with orthorhombic phase. The best thin film was formed when using an agitation time of the complexing agent of 16 min, resulting in a maximum crystallite size of 8.26 nm, lattice parameters close to reported values (a = 4.30 A, b = 10.55 A, and c = 3.89 A), and a calculated bandgap of around 1.65 eV. Investigation of the trend with deposition temperature indicated that values between 40°C and 45°C during CBD were better. Variation of the deposition temperature resulted in crystallite sizes ranging from 5 nm to 25 nm and bandgap values from 1.62 eV to 1.66 eV.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. O. Awadallah and Z. Cheng, Sol. Energ. Mater. Sol. C. 176, 222 (2018). https://doi.org/10.1016/j.solmat.2017.11.038.10.1016/j.solmat.2017.11.038 ↗
2. S. Thiruvenkadam, S. Prabhakaran, S. Chakravarty, V. Ganesan, V. Sathe, M.S. Kumar, and A.L. Rajesh, Phys. B Condens. Matter 533, 22 (2018). https://doi.org/10.1016/j.physb.2017.12.065.10.1016/j.physb.2017.12.065 ↗
3. J. Conde, I. Zuñiga, H. Vilchis, N. Hérnandez-Como, F. Pola-Albores, and J. Pantoja, J. Mater. Sci.: Mater. Electron. 29, 15445 (2018). https://doi.org/10.1007/s10854-018-9075-3.10.1007/s10854-018-9075-3 ↗
4. J.Y. Cho, S. Sinha, M.G. Gang, and J.J. Heo, J. Alloys Compd. 796, 160 (2019). https://doi.org/10.1016/j.jallcom.2019.05.035.10.1016/j.jallcom.2019.05.035 ↗
5. M.S. Mahdi, H.S. Al-Arab, H.S. Al-Salman, K. Ibrahim, N.M. Ahmed, A. Hmood, and M. Bououdina, Mater. Lett. 273, 127910 (2020). https://doi.org/10.1016/j.matlet.2020.127910.10.1016/j.matlet.2020.127910 ↗
6. Q.X. Zhang, S.Y. Ma, R. Zhang, Y. Tie, and S.T. Pei, Mater. Lett. 258, 126783 (2020). https://doi.org/10.1016/j.matlet.2019.126783.10.1016/j.matlet.2019.126783 ↗
7. S.H. Chaki, M.D. Chaudhary, and M.P. Deshpande, J. Semicond. 37, 053001 (2016). https://doi.org/10.1088/1674-4926/37/5/053001.10.1088/1674-4926/37/5/053001 ↗
8. A.R. Garcia-Angelmo, M.T.S. Nair, and P.K. Nair, Solid State Sci. 30, 26 (2014). https://doi.org/10.1016/j.solidstatesciences.2014.02.002.10.1016/j.solidstatesciences.2014.02.002 ↗
9. U. Chalapathi, B. Poornaprakash, and S.-H. Park, Sol. Energ. 139, 238 (2016). https://doi.org/10.1016/j.solener.2016.09.046.10.1016/j.solener.2016.09.046 ↗
10. E. Guneri, C. Ulutas, F. Kirmizigul, G. Altindemir, F. Gode, and C. Gumus, Appl. Surf. Sci. 257, 1189 (2010). https://doi.org/10.1016/j.apsusc.2010.07.104.10.1016/j.apsusc.2010.07.104 ↗
11. M. Cao, W. Chuangsheng, K. Yao, J. Jing, J. Huang, M. Cao, J. Zhang, J. Lai, O. Ali, L. Wang, and Y. Shen, Mater. Res. Bull. 104, 244 (2018). https://doi.org/10.1016/j.materresbull.2018.03.039.10.1016/j.materresbull.2018.03.039 ↗
12. A. Basak, A. Hati, A. Mondal, U.P. Singh, and S.K. Taheruddin, Thin Solid Films 645, 97 (2018). https://doi.org/10.1016/j.tsf.2017.10.039.10.1016/j.tsf.2017.10.039 ↗
13. Y. Liu, K. Cao, J. Liu, Z. Zhang, J. Ji, F. Wang, and Z. Li, J. Mater. Sci.: Mater. Electron. 30, 15880 (2019). https://doi.org/10.1007/s10854-019-01924-7.10.1007/s10854-019-01924-7 ↗
14. B. Poornaprakash, U. Chalapathi, S.P. Vattikuti, M.C. Sekhar, B.P. Reddy, P.T. Poojitha, and S.H. Park, Mater. Res. Bull. 103, 13 (2018). https://doi.org/10.1016/j.materresbull.2018.03.016.10.1016/j.materresbull.2018.03.016 ↗
15. V.K. Arepalli, Y. Shin, and J. Kim, Superlattice Microst. 122, 253 (2018). https://doi.org/10.1016/j.spmi.2018.08.001.10.1016/j.spmi.2018.08.001 ↗
16. A.M.S. Arulanantham, S. Valanarasu, K. Jeyadheepan, V. Ganesh, and M. Shkir, J. Mol. Struct. 1152, 137 (2018). https://doi.org/10.1016/j.molstruc.2017.09.077.10.1016/j.molstruc.2017.09.077 ↗
17. P. Sinsermsuksakul, L. Sun, and S.W. Lee, Adv. Energy Mater. 4, 1400496 (2014). https://doi.org/10.1002/aenm.201400496.10.1002/aenm.201400496 ↗
18. A.R. Garcia-Angelmo, R. Romano-Trujillo, J. Campos-Álvarez, O. Gomez-Daza, M.T.S. Nair, and P.K. Nair, Phys. Status Solidi A 212, 2332 (2015). https://doi.org/10.1002/pssa.201532405.10.1002/pssa.201532405 ↗
19. Laboratory, National Renewable Energy NREL, https://www.nrel.gov/pv/assets/images/efficiency-chart.png. Accessed 13 Apr 2020.
20. T.D. Lee and A.U. Ebong, Renew. Sust. Energ. Rev. 70, 1286 (2017). https://doi.org/10.1016/j.rser.2016.12.028.10.1016/j.rser.2016.12.028 ↗
21. First Solar, http://investor.firstsolar.com/releasedetail.cfm?ReleaseID=956479. Accessed 13 Apr 2020.
22. P. Jackson, R. Wuerz, D. Hariskos, E. Lotter, W. Witte, and M. Powalla, Phys. Status Solidi RRL 10, 583 (2016). https://doi.org/10.1002/pssr.201600199.10.1002/pssr.201600199 ↗
23. J.A. Andrade-Arvizu, M. Courel-Piedrahita, and O. Vigil-Galán, J. Mater. Sci.: Mater. Electron. 26, 4541 (2015). https://doi.org/10.1007/s10854-015-3050-z.10.1007/s10854-015-3050-z ↗
24. S.S. Hegde, A.G. Kunjomana, P. Murahari, B.K. Prasad, and K. Ramesh, Surf. Interfaces 10, 78 (2018). https://doi.org/10.1016/j.surfin.2017.12.003.10.1016/j.surfin.2017.12.003 ↗
25. M. Gurubhaskar, N. Thota, M. Raghavender, G.H. Chandra, P. Prathap, and Y.V. Subbaiah, Vacuum 155, 318 (2018). https://doi.org/10.1016/j.vacuum.2018.06.011.10.1016/j.vacuum.2018.06.011 ↗
26. M.S. Mahdi, K. Ibrahim, N.M. Ahmed, A. Hmood, S.A. Azzez, F.I. Mustafa, and M. Bououdina, Mater. Lett. 210, 279 (2018). https://doi.org/10.1016/j.matlet.2017.09.049.10.1016/j.matlet.2017.09.049 ↗
27. U. Chalapathi, B. Poornaprakash, and S.H. Park, J. Alloys Compd. 689, 938 (2016). https://doi.org/10.1016/j.jallcom.2016.08.066.10.1016/j.jallcom.2016.08.066 ↗
28. Y. Jayasree, U. Chalapathi, and P.U. Bhaskar, Appl. Surf. Sci. 258, 2732 (2012). https://doi.org/10.1016/j.apsusc.2011.10.124.10.1016/j.apsusc.2011.10.124 ↗
29. I. Ammar, A. Gassoumi, A. Akkari, F. Delpech, S. Ammar, and N. Turki-Kamoun, Eur. Phys. J. Plus 134, 505 (2019). https://doi.org/10.1140/epjp/i2019-12976-3.10.1140/epjp/i2019-12976-3 ↗
30. U. Chalapathi, B. Poornaprakash, W.J. Choi, and S.H. Park, Appl. Phys. A 126, 583 (2020). https://doi.org/10.1007/s00339-020-03763-4.10.1007/s00339-020-03763-4 ↗
31. L.P. Joshi, L. Risal, and S.P. Shrestha, J. Nepal Phys. Soc. 3, 1 (2015). https://doi.org/10.3126/jnphyssoc.v3i1.14436.10.3126/jnphyssoc.v3i1.14436 ↗
32. P. Mani, K. Manikandan, and J.J. Prince, J. Mater. Sci.: Mater. Electron. 27, 9255 (2016). https://doi.org/10.1007/s10854-016-4963-x.10.1007/s10854-016-4963-x ↗
33. M. Du, X. Yin, and H. Gong, Mater. Lett. 152, 40 (2015). https://doi.org/10.1016/j.matlet.2015.03.020.10.1016/j.matlet.2015.03.020 ↗
34. A. Banotra and N. Padha, J. Cryst. Growth 534, 125460 (2020). https://doi.org/10.1016/j.jcrysgro.2019.125460.10.1016/j.jcrysgro.2019.125460 ↗
35. R.K. Choubey, D. Desai, S.N. Kale, and S.J. Kumar, Mater. Sci: Mater. Electron. 27, 7890 (2016). https://doi.org/10.1007/s10854-016-4780-2.10.1007/s10854-016-4780-2 ↗
36. A. Jacob, M.F. Andrade-Arvizu, M. García-Sánchez, F.Pulgarín-Agudelo Courel-Piedrahita, E. Santiago-Jaimes, E. Valencia-Resendiz, A. Arce-Plaza, and O. Vigil-Galán, J. Anal. Appl. Pyrolysis 121, 347 (2016). https://doi.org/10.1016/j.jaap.2016.08.016.10.1016/j.jaap.2016.08.016 ↗
37. C.M. Avendaño, M. Courel, J.P. Enríquez, R.C. Valderrama, A.M. Ayala, I.M. De Los Santos, and J.B. Pérez, Mater. Res. Express 6, 076413 (2019). https://doi.org/10.1088/2053-1591/ab1291.10.1088/2053-1591/ab1291 ↗
38. T. Sall, M. Mollar, and B. Marí, Opt. Quant. Electron. 49, 386 (2017). https://doi.org/10.1007/s11082-017-1219-9.10.1007/s11082-017-1219-9 ↗
39. V.K. Arepalli, Y. Shin, and J. Kim, Opt. Mater. 88, 594 (2019). https://doi.org/10.1016/j.optmat.2018.12.016.10.1016/j.optmat.2018.12.016 ↗
40. H. Kafashan, Ceram. Int. 45, 334 (2019). https://doi.org/10.1016/j.ceramint.2018.09.172.10.1016/j.ceramint.2018.09.172 ↗
41. E.B. Díaz-Cruz, L. González-Espinoza, E. Regalado-Pérez, O.A. Castelo-González, M.C. Arenas-Arrocena, and H. Hu, J. Alloys Compd. 797, 537 (2019). https://doi.org/10.1016/j.jallcom.2019.05.002.10.1016/j.jallcom.2019.05.002 ↗
42. R.S. Dhari, Z. Javanbakht, and W. Hall, Mater. Lett. 284, 129026 (2021). https://doi.org/10.1016/j.matlet.2020.129026.10.1016/j.matlet.2020.129026 ↗