Magnetic Properties of Iron-Based Alloy Powder Coils Prepared with Screen Printing Using High-Solid-Content Magnetic Pastes
Source abstract
Abstract
A molding coil is prepared by filling and dry pressing granulated alloy magnetic powders directly onto enameled wire. As the molding coil is developed toward miniaturization, the granules consisting of magnetic powder and organic binder cannot uniformly fill the small space in the coil center column during molding. This leads to a porous microstructure or cracks. The uneven packing problem in the coil center column was effectively solved in this study by applying a screen printing process using high-solid-content magnetic pastes. Bisphenol A epoxy resin has the benefits of excellent mechanical, bonding, electrical, corrosion resistance, low shrinkage and low cost properties. However, the viscosity is too high for use as a binder for high-solid-content magnetic paste. The magnetic paste viscosity can be reduced by substituting some low viscosity reactive diluent (butyl glycidyl ether) for Bisphenol A epoxy resin. It was observed that the relative density and magnetic properties (such as initial permeability, saturation magnetization, and core loss) can be effectively improved by increasing the monomer addition because the monomer acts as a lubricant that helps the magnetic particles rearrange during compaction. However, as monomer addition becomes greater than half the epoxy resin weight percent, the sample bending strength decreases.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Powder Metallurgy Techniques and Materials · Magnetic Properties of Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. H.I. Hsiang, L.F. Fan, and K.T. Ho, H.I. Hsiang, L.F. Fan, and K.T. Ho, Minor yttrium addition effect on FeSiCr alloy powder core electromagnetic properties J. Magn. Magn. Mater., 2017, 444, p 1–6.10.1016/j.jmmm.2017.07.099 ↗
2. H.I. Hsiang, L.F. Fan, and K.T. Ho, H.I. Hsiang, L.F. Fan, and K.T. Ho, Relationship between the microstructure and magnetic properties of Fe-Si-Cr powder cores IEEE Tran. Magn., 2018, 54, p 2000407.10.1109/TMAG.2018.2792433 ↗
3. Y.P. Wu, H.Y. Chiang, and H.I. Hsiang, Y.P. Wu, H.Y. Chiang, and H.I. Hsiang, Interactions between silver inner electrode and Fe-Si-Cr alloy of metal multilayer chip inductors AIP Adv., 2018, 8, p 085006.10.1063/1.5032300 ↗
4. Y.P. Wu, H.Y. Chiang, and H.I. Hsiang, Y.P. Wu, H.Y. Chiang, and H.I. Hsiang, AgCrO2 formation mechanism during silver inner electrodeand Fe-Si-Cr alloy powder co-firing in metal multilayer chip power inductors J. Mater. Sci. Mater. Electron., 2019, 30, p 8080–8088.10.1007/s10854-019-01130-5 ↗
5. H.I. Hsiang, L.F. Fan, and J.J. Hung, H.I. Hsiang, L.F. Fan, and J.J. Hung, Effects of the sodium stearate addition on the corrosion resistance and electromagnetic properties of phosphatized iron-based SMCs J. Magn. Magn. Mater., 2019, 490, p 165532.10.1016/j.jmmm.2019.165532 ↗
6. H.I. Hsiang, L.F. Fan, and J.J. Hung, H.I. Hsiang, L.F. Fan, and J.J. Hung, Phosphoric acid addition effect on the microstructure and magnetic properties of iron-based soft magnetic composites J. Magn. Magn. Mater., 2018, 447, p 1–8.10.1016/j.jmmm.2017.08.096 ↗
7. L.F. Fan, H.I. Hsiang, and J.J. Hung, L.F. Fan, H.I. Hsiang, and J.J. Hung, Silane surface modification effects on the electromagnetic properties of phosphatized iron-based SMCs Appl. Surf. Sci., 2018, 433, p 133–138.10.1016/j.apsusc.2017.10.022 ↗
8. W.S. Chen, Y.L. Chang, H.I. Hsiang, F.C. Hsu, Y.H. Shen, and F.S. Yen, W.S. Chen, Y.L. Chang, H.I. Hsiang, F.C. Hsu, Y.H. Shen, and F.S. Yen, Mechanical and dielectric properties of NiZn ferrite powders-CTBN modified epoxy resin coatings Polym. Plast. Tech. Eng., 2011, 50, p 568–572.10.1080/03602559.2010.543737 ↗
9. J.E. Yoo, and Y.M. Kang, J.E. Yoo, and Y.M. Kang, Electromagnetic wave absorbing properties of Ni-Zn ferrite powder–epoxy composites in GHz range J. Magn. Magn. Mater., 2020, 513, p 167075.10.1016/j.jmmm.2020.167075 ↗
10. W.S. Chen, Y.L. Chang, H.I. Hsiang, F.C. Hsu, and F.S. Yen, W.S. Chen, Y.L. Chang, H.I. Hsiang, F.C. Hsu, and F.S. Yen, Effects of titanate coupling agent on the dielectric properties of NiZn ferrite powders-epoxy resin coatings Ceram. Int., 2011, 37, p 2347–2352.10.1016/j.ceramint.2011.05.081 ↗
11. S. Lin, B. Bulkin, and E. Pearce, S. Lin, B. Bulkin, and E. Pearce, Epoxy resins. III. Application of Fourier transform IR to degradation studies of epoxy systems J. Polym. Sci. Polym. Chem. Ed., 1979, 17, p 3121–3148.10.1002/pol.1979.170171006 ↗
12. Y. Duan, S. Gu, Z. Zhang, and M. Wen, Y. Duan, S. Gu, Z. Zhang, and M. Wen, Characterization of structures and novel magnetic response of Fe87.5Si7Al5.5 alloy processed by ball milling J. Alloys Compd., 2012, 542, p 90–96.10.1016/j.jallcom.2012.06.128 ↗
13. T.Y. Byun, S.C. Byeon, K.S. Hong, and C.K. Kim, T.Y. Byun, S.C. Byeon, K.S. Hong, and C.K. Kim, Factors affecting initial permeability of Co-substituted Ni-Zn-Cu ferrites IEEE Trans. Magn., 1999, 35, p 3445–3447.10.1109/20.800552 ↗
14. S.U. Jan, and C.J. Wang, S.U. Jan, and C.J. Wang, Frequency dependence of coercivity and initial permeability in ferromagnetic metallic glasses J. Appl. Phys., 1988, 64, p 4627–4631.10.1063/1.341242 ↗
15. L.P. Lefebvre, S. Pelletier, and C. Gélinas, L.P. Lefebvre, S. Pelletier, and C. Gélinas, Effect of electrical resistivity on core losses in soft magnetic iron powder materials J. Magn. Magn. Mater., 1977, 176, p 93–96.10.1016/S0304-8853(97)01006-8 ↗
16. H. Shokrollahi, and K. Janghorban, H. Shokrollahi, and K. Janghorban, Soft magnetic composite materials (SMCs) J. Mater. Process. Technol., 2007, 189, p 1–12.10.1016/j.jmatprotec.2007.02.034 ↗
17. H. Su, X. Tang, H. Zhang, Y. Jing, and Z. Zhong, H. Su, X. Tang, H. Zhang, Y. Jing, and Z. Zhong, Effects of Nb2O5 on DC-bias-superposition characteristic of the low-temperature-fired NiCuZn ferrites IEEE Trans. Magn., 2013, 49, p 4222–4225.10.1109/TMAG.2013.2243702 ↗
18. Z.K. Chen, G. Yang, J.P. Yang, S.Y. Fu, L. Ye, and Y.G. Huang, Z.K. Chen, G. Yang, J.P. Yang, S.Y. Fu, L. Ye, and Y.G. Huang, Simultaneously increasing cryogenic strength, ductility and impact resistance of epoxy resins modified by n-butyl glycidyl ether Polymer, 2009, 50, p 1316–1323.10.1016/j.polymer.2008.12.048 ↗