journal article·2018-05

Effects of O2 Partial Pressure on Composition and Infrared Emissivity of PtO x Films Prepared by Reactive Magnetron Sputtering

Wenbo Kang, Dongmei Zhu, Zhibin Huang, Fa Luo

Journal of Electronic Materials· Volume 47· Issue 5
Publisher page

Abstract

PtO x films have been prepared by reactive magnetron sputtering on glass substrates without external heating and characterized by x-ray diffraction (XRD) analysis, x-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). The resulting PtO x films mainly consisted of amorphous PtO and PtO2, and the composition largely depended on the O2 partial pressure during sputtering. In this study, the effects of the O2 partial pressure on the deposition rate, composition, surface morphology, structure, electrical resistivity, and infrared emissivity of the as-deposited PtO x films were evaluated. It was found that, with increase in the O2 partial pressure, the O/Pt atomic ratio, resistivity, and infrared emissivity of the as-deposited PtO x film increased, while the deposition rate first increased then decreased with increasing O2 partial pressure. In addition, the O2 partial pressure had little influence on the structure or surface morphology of the as-deposited PtO x film.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Transition Metal Oxide Nanomaterials · ZnO doping and properties · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Q.C. Zhang and Y.G. Shen, Sol. Energy. Mater. Sol. Cells 81, 25 (2004).10.1016/j.solmat.2003.08.021 ↗
2. F.Y. Zhang, Y.M. Zhou, Y. Cao, and J. Chen, Mater. Lett. 61, 4811 (2007).10.1016/j.matlet.2007.03.108 ↗
3. Z.B. Huang, D.M. Zhu, F. Lou, and W.C. Zhou, Appl. Surf. Sci. 255, 2619 (2008).10.1016/j.apsusc.2008.07.185 ↗
4. Z.B. Huang, W.C. Zhou, X.F. Tang, F. Luo, and D.M. Zhu, Appl. Surf. Sci. 256, 6893 (2010).10.1016/j.apsusc.2010.04.107 ↗
5. Z.B. Huang, W.C. Zhou, and X.F. Tang, Appl. Surf. Sci. 256, 2025 (2010).10.1016/j.apsusc.2009.09.042 ↗
6. K.S. Chou and Y.C. Lu, Thin Solid Films 515, 7217 (2007).10.1016/j.tsf.2007.03.047 ↗
7. E. Ando and M. Miyazaki, Thin Solid Films 516, 4574 (2008).10.1016/j.tsf.2007.06.028 ↗
8. E. Ando, S. Suzuki, and N. Aomine, et’ al., Vacuum 59, 792 (2000).10.1016/S0042-207X(00)00349-3 ↗
9. X.Y. Ye, Y.M. Zhou, Y.Q. Sun, J. Chen, and Z.Q. Wang, Appl. Surf. Sci. 254, 5975 (2008).10.1016/j.apsusc.2008.03.186 ↗
10. H.J. Yu, G.Y. Xu, and X.M. Shen, Appl. Surf. Sci. 255, 6077 (2009).10.1016/j.apsusc.2009.01.019 ↗
11. J. Chen, Y.M. Zhou, Q.L. Zhou, Y.Q. Sun, X.Y. Ye, and Z.Q. Wang, Appl. Surf. Sci. 253, 9154 (2007).10.1016/j.apsusc.2007.05.046 ↗
12. X.X. Yan and G.Y. Xu, Prog. Org. Coat. 69, 481 (2010).10.1016/j.porgcoat.2010.09.002 ↗
13. C. Hu, G.Y. Xu, X.M. Shen, R. Huang, and F.L. Li, J. Alloys Compd. 496, 691 (2010).10.1016/j.jallcom.2010.02.172 ↗
14. C. Hu, G.Y. Xu, X.M. Shen, C.M. Shao, and X.X. Yan, Appl. Surf. Sci. 256, 3459 (2010).10.1016/j.apsusc.2009.12.053 ↗
15. Z.B. Huang, W.C. Zhou, X.F. Tang, D.M. Zhu, and F. Luo, Thin Solid Films 519, 3100 (2011).10.1016/j.tsf.2010.12.157 ↗
16. Z.B. Huang, W.C. Zhou, and X.F. Tang, Acta Metall. Sin. (Engl. Lett.) 23, 1 (2010).
17. T. Hao, L.H. Tao, and C.H. Feng, Chin. Phys. B 23, 025201 (2014).10.1088/1674-1056/23/2/025201 ↗
18. H. Neff, S. Henkel, E. Hartmannsgruber, E. Steinbeiss, W. Michalke, K. Steenbeck, and H.G. Schmidt, J. Appl. Phys. 79, 7672 (1996).10.1063/1.362341 ↗
19. I. Dutta, M.K. Carpenter, M.P. Balogh, J.M. Ziegelbauer, T.E. Moylan, M.H. Atwan, and N.P. Irish, J. Phys. Chem. C 114, 16309 (2010).10.1021/jp106042z ↗
20. A. Mosquera, D. Horwat, L. Vazquez, A. Gutiérrez, A. Erko, A. Anders, J. Andersson, and J.L. Endrino, J. Mater. Res. 27, 829 (2012).10.1557/jmr.2011.418 ↗
21. K.L. Saenger, C. Cabral, C. Lavoie, and S.M. Rossnagel, J. Appl. Phys. 86, 6084 (1999).10.1063/1.371718 ↗
22. A.V. Kolobov, F. Wilhelm, A. Rogalev, T. Shima, and J. Tominaga, Appl. Phys. Lett. 86, 121909 (2005).10.1063/1.1886255 ↗
23. J.R. McBride, G.W. Graham, C.R. Peters, and W.H. Weber, J. Appl. Phys. 69, 1596 (1991).10.1063/1.347255 ↗
24. Y. Abe, M. Kawamura, and K. Sasaki, Jpn. J. Appl. Phys. 38, 2092 (1999).10.1143/JJAP.38.2092 ↗
25. L. Maya, L. Riester, T. Thundat, and C.S. Yust, J. Appl. Phys. 84, 6382 (1998).10.1063/1.368883 ↗
26. Y. Abe, H. Yanagisawa, and K. Sasaki, Jpn. J. Appl. Phys. 37, 4482 (1998).10.1143/JJAP.37.4482 ↗
27. P. Fuchs, Appl. Surf. Sci. 256, 1382 (2009).10.1016/j.apsusc.2009.08.093 ↗
28. C.R. Aita and N.C. Tran, J. Appl. Phys. 56, 958 (1984).10.1063/1.334035 ↗
29. M. Clery, Propriéties physique et structurales d’une résistance thermique en Zircone yttriée obtenue par pulvérisation cathodique, Thesis, Université Paris VI, Jun, (1992).
30. H.Y. Wang and Y.C. Hu, Int. J. Photoenergy 2013, 1 (2013).
31. K. Kuribayashi and S. Kitamura, Thin Solid Films 400, 160 (2001).10.1016/S0040-6090(01)01503-6 ↗
32. Y.C. Chen, Y.M. Sun, S.Y. Yu, C.P. Hsiung, J.Y. Gan, and C.S. Kou, Nucl. Instrum. Methods B 237, 296 (2005).10.1016/j.nimb.2005.05.014 ↗
33. M.M. da Silva, A.R. Vaz, S.A. Moshkalev, and J.W. Swart, ECS Trans. 9, 235 (2007).10.1149/1.2766894 ↗
34. V. Dolique, A.L. Thomann, E. Millon, A. Petit, and P. Brault, Appl. Surf. Sci. 295, 194 (2014).10.1016/j.apsusc.2014.01.026 ↗
35. Y.Q. Li, Y.Z. Shen, and F.L. Du, Mater. Res. Innov. 18, 57 (2014).10.1179/1433075X13Y.0000000113 ↗
36. D.M. Zhu, K. Li, F. Luo, and W.C. Zhou, Appl. Surf. Sci. 255, 6145 (2009).10.1016/j.apsusc.2009.01.068 ↗