Effects of MgO Content on Dielectric Properties of Ba0.94Bi0.04Sn0.06Ti0.94O3/MgO Composite Ceramics
Source abstract
Abstract
The composite ceramics of Ba0.94Bi0.04Sn0.06Ti0.94O3 (BBST) with x wt.% MgO (0 ≤ x ≤ 30) were prepared by solid-state sintering. The effects of MgO content on the microstructure and dielectric properties of the composite ceramics have been investigated. The results show that MgO is uniformly distributed in BBST matrix and enhances the relative density of composite ceramics remarkably, which effectively optimizes the performances of dielectric loss, alternating current (AC) breakdown strength (BDS) and insulation. With the content of MgO increasing from 0 wt.% to 30 wt.%, the dielectric constant decreases from 2900 to 920, dielectric loss decreases from 0.011 to 0.0065, BDS is improved from 26 kV/cm to 53.6 kV/cm and leakage current density decreases from 2.96 × 10−7 A/cm2 to 9.55 × 10−8 A/cm2. The ceramic added with 30 wt.% MgO exhibits the best comprehensive dielectric properties, which is a superior dielectric used in high-voltage ceramic capacitors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. M. Uzair, Y. Iqbal, R. Muhammad, K. Hayat, and I.M. Reaney, J. Mater. Sci. 50, 1752 (2015).10.1007/s10853-014-8738-6 ↗
2. W.H. Lee and C.Y.J. Su, Am. Ceram. Soc. 90, 3345 (2007).10.1111/j.1551-2916.2007.01900.x ↗
3. M.J. Wang, H. Yang, Q.L. Zhang, Z.S. Lin, Z.S. Zhang, D. Yu, and L. Hu, Mater. Res. Bull. 60, 485 (2014).10.1016/j.materresbull.2014.09.023 ↗
4. Y. Pu, W. Chen, S. Chen, and H.T. Langhammer, Cerâmica 51, 214 (2005).10.1590/S0366-69132005000300007 ↗
5. S. Wang, H. He, and H. Su, J. Mater. Sci. Mater. Electron. 24, 2385 (2013).10.1007/s10854-013-1106-5 ↗
6. X. Huang, H. Hao, S. Zhang, H. Liu, W. Zhang, Q. Xu, and M. Cao, J. Am. Ceram. Soc. 97, 1797 (2014).10.1111/jace.12817 ↗
7. Q. Zhang, Y. Zhang, X. Wang, T. Ma, and Z. Yuan, Mater. Chem. Phys. 138, 737 (2013).10.1016/j.matchemphys.2012.12.050 ↗
8. C. Elissalde, U. Chung, A. Artemenko, C. Estourne, R. Costes, M. Pate, J.P. Ganne, S. Waechter, and M. Maglione, J. Am. Ceram. Soc. 95, 3239 (2012).10.1111/j.1551-2916.2012.05311.x ↗
9. S.H. Kim and J.H. Koh, Microelectron. Eng. 87, 79 (2010).10.1016/j.mee.2009.05.021 ↗
10. E.K. Beauchamp, J. Am. Ceram. Soc. 54, 484 (1971).10.1111/j.1151-2916.1971.tb12184.x ↗
11. Q.M. Zhang, L. Wang, J. Luo, Q. Tang, and J. Du, Int. J. Appl. Ceram. Tech. 7, E124 (2010).
12. J.H. Kim, S.H. Yoon, and Y.H. Han, J. Eur. Ceram. Soc. 27, 1113 (2007).10.1016/j.jeurceramsoc.2006.05.039 ↗
13. X.C. Huang, H.X. Liu, S.J. Zhang, Y. Sun, W.Q. Zhang, L. Zhang, and M.H. Cao, Ceram. Int. 6, 7489 (2015).10.1016/j.ceramint.2015.02.070 ↗
14. W.C. Vittayakorn, N. Pulphol, R. Roongtao, R. Muanghlua, and N. Vittayakorn, Ferroelectrics 451, 15 (2013).10.1080/00150193.2013.838878 ↗
15. M. Wintersgill, J. Fontanella, C. Andeen, and D. Schuele, J. Appl. Phys. 50, 8259 (1979).10.1063/1.325932 ↗
16. Z.H. Wu, H.X. Liu, M.H. Cao, Z.Y. Shen, Z.H. Yao, H. Hao, and D.B. Luo, J. Ceram. Soc. Jpn. 116, 345 (2008).10.2109/jcersj2.116.345 ↗