Synthesis of High Purity Bismuth Telluride (Bi2Te3) Nanostructures by Co-precipitation Process and Annealing Under Hydrazine Vapor: Structural and Thermoelectric Studies
Source abstract
Abstract
High-purity bismuth telluride (Bi2Te3) nanostructures have been synthesized by a chemical reduction method with two processes: (1) co-precipitation by NaBH4 and (2) annealing under hydrazine vapor and nitrogen gas atmosphere at T = 300°C. Based on the use of nitric acid (HNO3) in the preparation of precursor solutions from primary materials, two syntheses were designed to prepare the Bi2Te3 nanostructures. Then, the structural, optical, and thermoelectric properties and the surface morphology of the obtained nanoparticles from the two syntheses were investigated. The X-ray diffraction analysis results revealed the formation of Bi2Te3 nanostructures in both syntheses. The values of the crystallite size and micro-strains of the Bi2Te3 nanostructure were obtained from the average Williamson–Hall (Langford) analysis and Scherrer methods. Field-emission scanning electron microscopy micrographs of the Bi2Te3 nanostructures showed hexagonal nanocrystals with different nano-sizes. Energy dispersive x-ray spectroscopy analysis confirmed the formation of the Bi2Te3 compound and the high purity of the synthesized nanostructures. The Bi2Te3 nanostructure produced in the second synthesis (HNO3-Bi&Te) had a higher Seebeck coefficient (56.3 $$\mu \mathrm{V}/\mathrm{K}$$ ) and lower resistance (9 $$\mathrm{k}{\Omega }$$ ). The amount of ZT in this optimal synthesis (HNO3-Bi&Te) increased by 6.5 times. The results of the Seebeck experiment mostly showed p-type conductivity for the two syntheses. Fourier-transform infrared spectroscopy analysis showed very low absorption of the NH2 group on the Bi2Te3 nanostructured surface. This study showed that annealing in the presence of hydrazine vapor has major influences on the formation of the bismuth telluride binary phase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · nanoparticles nucleation surface interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Y. Sun, W. Xu, and C. D. Zhu, Synth. Met. 225, 22 (2017).10.1016/j.synthmet.2016.12.001 ↗
2. K. Kaur and R. Kumar, Prog. Nat. Sci. Mater. Int. 26, 533 (2016).10.1016/j.pnsc.2016.11.003 ↗
3. N. Toshima, Synth. Met. 225, 3 (2017).10.1016/j.synthmet.2016.12.017 ↗
4. K. Oshima, Y. Yanagawa, H. Asano, Y. Shiraishi, and N. Toshima, Synth. Met. 225, 81 (2017).10.1016/j.synthmet.2016.12.019 ↗
5. H. Mamur, M.R.A. Bhuiyan, F. Korkmaz, and M. Nil, Renew. Sustain. Energy. Rev. 82, 4159 (2018).10.1016/j.rser.2017.10.112 ↗
6. M. Zakeri, M. Allahkarami, G. Kavei, A. Khanmohammadian, and M.R. Rahimipour, J. Mater. Process. Technol. 209, 96 (2009).10.1016/j.jmatprotec.2008.01.027 ↗
7. M.M. Nassary, H.T. Shaban, and M.S. El-Sadek, J. Optoelectron. Adv. Mater. 11, 180 (2009).
8. S. Wang, H. Li, R. Lu, G. Zheng, and X. Tang, Nanotechnology 24, 5702 (2013).
9. X. Chen, L. Liu, Y. Dong, L. Wang, L. Chen, and W. Jiang, Prog. Nat. Sci. Mater. Int. 22, 201 (2012).10.1016/j.pnsc.2012.04.006 ↗
10. M. Scheele, N. Oeschler, K. Meier, A. Kornowski, C. Klinke, and H. Weller, Adv. Funct. Mater. 19, 3476 (2009).10.1002/adfm.200901261 ↗
11. F.H. Lin and C.J. Liu, Ceram. Int. 45, 9397 (2019).10.1016/j.ceramint.2018.08.170 ↗
12. S. Gupta, S. Neeleshwar, V. Kumar, and Y.Y. Chen, Adv. Mater. Lett. 3, 50 (2012).10.5185/amlett.2011.7285 ↗
13. P. Srivastava and K. Singh, J. Therm. Anal. Calorim. 110, 523 (2012).10.1007/s10973-012-2553-6 ↗
14. Y. Li, Q. Zhao, Y.G. Wang, and K. Bi, Mater. Sci. Semicond. Process. 14, 219 (2011).10.1016/j.mssp.2011.02.019 ↗
15. K.T. Kim, H.M. Lee, D.W. Kim, K.J. Kim, G.H. Ha, and G.G. Lee, J. Korean Phys. Soc. 57, 1037 (2010).10.3938/jkps.57.1037 ↗
16. J. Fu et al., Cryst. Eng. Commun. 14, 2159 (2012).10.1039/c2ce06348d ↗
17. H.J. Kim, M.K. Han, H.Y. Kim, W. Lee, and S.J. KimBull, Korean Chem. Soc. 33, 3977 (2012).10.5012/bkcs.2012.33.12.3977 ↗
18. Y. Xu, Z. Ren, W. Ren, G. Cao, K. Deng, and Y. Zhong, Mater. Lett. 62, 4273 (2008).10.1016/j.matlet.2008.06.055 ↗
19. Q. Zhao and Y.G. Wang, J. Alloys Compd. 497, 57 (2010).10.1016/j.jallcom.2010.03.077 ↗
20. J.-L. Mi, N. Lock, T. Sun, M. Christensen, M. Søndergaard, P. Hald, H.H. Hng, J. Ma, and B.B. Iversen, ACS Nano 4, 2523 (2010).10.1021/nn100267q ↗
21. M. Salavati-Niasari, M. Bazarganipour, and F. Davar, J. Alloys Compd. 489, 530 (2010).10.1016/j.jallcom.2009.09.101 ↗
22. Y.H. Zhang, T.J. Zhu, J.P. Tu, and X.B. Zhao, Mater. Chem. Phys. 103, 484 (2007).10.1016/j.matchemphys.2007.02.059 ↗
23. L. Yang, Z. Chen, M. Hong, G. Han, J. Zou, and A.C.S. Appl, Mater. Interfaces. 7, 23694 (2015).10.1021/acsami.5b07596 ↗
24. W. Guo, J. Ma, and W. Zheng, J. Alloys Compd. 10, 228 (2015).
25. R. Jin, J. Liu, and G. Li, Cryst. Res. Technol. 49, 460 (2014).10.1002/crat.201400012 ↗
26. Y. Zhang, L.P. Hu, T.J. Zhu, J. Xie, and X.B. Zhao, Cryst. Growth Des. 13, 645 (2013).10.1021/cg3013156 ↗
27. H. He, D. Huang, X. Zhang, and G. Li, Solid State Commun. 152, 810 (2012).10.1016/j.ssc.2012.01.035 ↗
28. Y. Liang et al., J. Alloy. Compd. 509, 5147 (2011).10.1016/j.jallcom.2011.02.015 ↗
29. Y. Xu, Z. R. Ã, G. Cao, W. Ren, K. Deng, and Y. Zhong, Phys. B. Condens. Matter. 404, 4029 (2009).10.1016/j.physb.2009.07.153 ↗
30. Y. Deng, X. Zhou, G. Wei, J. Liu, C. Nan, and S. Zhao, J. Phys. Chem. Solids 63, 2119 (2002).10.1016/S0022-3697(02)00261-5 ↗
31. X.B. Zhao, X.H. Ji, Y.H. Zhang, and B.H. Lu, J. Alloys Compd. 368, 349 (2004).10.1016/j.jallcom.2003.08.070 ↗
32. B. Chen, X. Wang, J. Li, Q. Xiong, and C. Zhang, J. Mater. Chem. C 6, 10435 (2018).10.1039/C8TC04450C ↗
33. Y. He, Y. Zhang, H. Huang, N. Tian, and Y. Luo, Chem. Commun. 40, 55 (2014).
34. S. H. badiei et al. S.A. Manafi, Introduction to Phase Analysis of Nano Materials Using XPert HighScore Software Iran, Shahroud Islamic Azad University (SIAU), (2012).
35. M.H.EGh. Dini, Quantitative X-Ray Diffraction Analysis by the Rietveld method Using the MAUD Program (Iran: Isfahan University, 2018).
36. D.L. Pavia, G.M. Lampman, G.S. Kriz, and J.A. Vyvyan, Introduction to Spectroscopy. Cengage Learning (2014)
37. C. Weilong Y. Bai, 3rd International Conference on Material, Mechanical and Manufacturing Engineering (IC3ME) (2015), p. 2272.
38. M. Loor, G. Bendt, U. Hagemann, C. Wölper, W. Assenmacher, and S. Schulz, Dalton Trans. 45, 15326 (2016).10.1039/C6DT02361D ↗
39. P. Srivastava and K. Singh, J. Exp. Nanosci. 9, 1064 (2014).10.1080/17458080.2012.762122 ↗
40. F. Rouessac, and A. Rouessac, Chemical Analysis: Modern Instrumentation Methods and Techniques (New York: Wiley, 2013).
41. D.A. Skoog, F.J. Holler, and S.R. Crouch, Principles of Instrumental Analysis, 6th ed., (Belmont: Thomson Brooks/Cole, 2007), p. 737.
42. P. Anandan, M. Omprakash, M. Azhagurajan, M. Arivanandhan, D. RajanBabu, T. Koyama, and Y. Hayakawa, Cryst Eng Comm. 16, 7956 (2014).10.1039/C4CE00837E ↗
43. G.S. Nolas, J. Sharp, and J. Goldsmid, Thermoelectrics: Basic Principles and NEW Materials Developments (Berlin, 2013).
44. V.R. Akshay, M.V. Suneesh, and M. Vasundhara, Inorg. Chem. 56, 6264 (2017).10.1021/acs.inorgchem.7b00336 ↗