journal article·2018-09

High Voltage Li-Ion Capacitors in a Fluoro-Ether Based Electrolyte System

Bin Liu, Lingzhi Zhu, Enshan Han, Han Xu

Journal of Electronic Materials· Volume 47· Issue 9
Publisher page

Abstract

The specific capacity of a lithium-ion capacitor (LIC) with an activated carbon (AC) cathode depends on the range of potential during the charge/discharge process, but the electrolyte tends to decomposition when it is cycled in high voltage. An effective additive, fluorinated ethers (FE, HCF2CF2CF2CH2OCF2CF2H), which can inhibit the decomposition of carbonate-based electrolyte has been reported in this paper. The electrochemical measurements indicate that activated carbon exhibits poor cyclic stability when it is cycled under 4.5 V (versus Li/Li+) in the basic electrolyte. This issue can be overcome effectively by adding FE into the basic electrolyte. When the concentration of LiPF6 is increased to 1.1 mol L−1, the half cell exhibited an excellent cyclic performance. Charge/discharge tests indicate that the half cell has displayed outstanding cycling stability of 93.98% capacity retention after 200 cycles in the potential range of 1.5–4.5 V.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. P. Simon and A.F. Burke, Electrochem. Soc. Interface 17, 38 (2008).10.1149/2.F05081IF ↗
2. M. Arulepp, L. Permann, J. Leis, A. Perkson, K. Rumma, A. Jänes, and E. Lust, J. Power Sources 133, 320 (2004).10.1016/j.jpowsour.2004.03.026 ↗
3. P.W. Ruch, D. Cericola, A. Foelske-Schmitz, R. Kötz, and A. Wokaun, Electrochim. Acta 55, 4412 (2010).10.1016/j.electacta.2010.02.064 ↗
4. K. Xu and C.A. Angell, J. Electrochem. Soc. 145, L70 (1998).10.1149/1.1838419 ↗
5. X. Sun and C.A. Angell, Electrochem. Commun. 11, 1418 (2009).10.1016/j.elecom.2009.05.020 ↗
6. N. Shao, X.-G. Sun, S. Dai, and D.-E. Jiang, J. Phys. Chem. B 115, 12120 (2011).10.1021/jp204401t ↗
7. Y. Abu-Lebdeh and I. Davidson, J. Power Sources 189, 576 (2009).10.1016/j.jpowsour.2008.09.113 ↗
8. M. Nagahama, N. Hasegawa, and S. Okada, J. Electrochem. Soc. 157, A748 (2010).10.1149/1.3417068 ↗
9. Y. Abu-Lebdeh and I. Davidson, J. Electrochem. Soc. 156, A60 (2009).10.1149/1.3023084 ↗
10. A.J. Gmitter, I. Plitz, and G.G. Amatucci, J. Electrochem. Soc. 159, A370 (2012).10.1149/2.016204jes ↗
11. A. von Cresce and K. Xu, J. Electrochem. Soc. 158, A337 (2011).10.1149/1.3532047 ↗
12. S. Dalavi, M. Xu, B. Knight, and B.L. Lucht, Electrochem. Solid State Lett. 15, A28 (2011).10.1149/2.015202esl ↗
13. L. Yang, T. Markmaitree, and B.L. Lucht, J. Power Sources 196, 2251 (2011).10.1016/j.jpowsour.2010.09.093 ↗
14. X. Wang, X. Zheng, Q. Huang, L. Xing, M. Xu, and W. Li, Power Sources 338, 108 (2017).10.1016/j.jpowsour.2016.10.103 ↗
15. J. Xia, R. Petibon, A. Xiao, W.M. Lamannac, and J.R. Dahn, J. Power Sources 330, 175 (2016).10.1016/j.jpowsour.2016.09.012 ↗
16. E. Peled, D. Golodnitsky, C. Menachem, and D. BarTow, J. Electrochem. Soc. 145, 3482 (1998).10.1149/1.1838831 ↗
17. K. Xu, Chem. Rev. 114, 11503 (2014).10.1021/cr500003w ↗