Systematic Optimization of Boron Diffusion for Solar Cell Emitters
Source abstract
Abstract
To achieve p–n junctions for n-type solar cells, we have studied BBr3 diffusion in an open tube furnace, varying parameters of the BBr3 diffusion process such as temperature, gas flows, and duration of individual process steps, i.e., predeposition and drive-in. Then, output parameters such as carrier lifetime, sheet resistance, and diffusion profile were measured and statistically analyzed to optimize the emitter characteristics. Statistical analysis (factorial design) was finally employed to systematically explore the effects of the set of input variables on the outputs. The effect of the interactions between inputs was also evaluated for each output, quantified using a two-level factorial method. Temperature and BBr3 flow were found to have the most significant effect on different outputs such as carrier lifetime, junction depth, sheet resistance, and final surface concentration.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Advancements in Semiconductor Devices and Circuit Design
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. F. Granek, High-Efficiency Back-Contact Back-Junction Silicon Solar Sells (Albert-Ludwigs-Universität Freiburg im Breisgau, 2009), https://www.freidok.uni-freiburg.de/fedora/objects/freidok:7372/datastreams/FILE1/content . Accessed 1 November 2016.
2. E. Van Kerschaver and G. Beaucarne, Prog. Photovolt. Res. Appl. (2006). doi: 10.1002/pip.657 .10.1002/pip.657 ↗
3. K. Mangersnes, Back-Contacted Back-Junction Silicon Solar Cells (University of Oslo, 2010), https://www.mn.uio. no/fysikk/english/people/aca/aas/theses/KristerMangersnes_ PhD_Thesis_submitted.pdf . Accessed 1 November 2016.
4. R.M. Swanson, Prog. Photovolt. Res. Appl. (2006). doi: 10.1002/pip.709 .10.1002/pip.709 ↗
5. M. Kolahdouz, A. Afshar, M. Farniya, M. Östling, and H.H. Radamson, Solid State Electron. (2011). doi: 10.1016/j.sse.2011.01.010 .10.1016/j.sse.2011.01.010 ↗
6. Y. Schiele, S. Joos, G. Hahn, and B. Terheiden, Energy Procedia (2014). doi: 10.1016/j.egypro.2014.08.086 .10.1016/j.egypro.2014.08.086 ↗
7. S. Barth, O. Doll, I. Koehler, K. Neckermann, M. Blech, A. Lawerenz, A. Edler, R. Kopecek, and J.J. Schneider, Energy Procedia (2013). doi: 10.1016/j.egypro.2013.07.297 .10.1016/j.egypro.2013.07.297 ↗
8. H. Hieslmair, L. Mandrell, I. Latchford, M. Chun, J. Sullivan, and B. Adibi, Energy Procedia (2012). doi: 10.1016/j.egypro.2012.07.039 .10.1016/j.egypro.2012.07.039 ↗
9. Y.W. Ok, A.D. Upadhyaya, Y. Tao, and A. Rohatgi, Sol. Energy Mater. Sol. Cells (2014). doi: 10.1016/j.solmat.2014.01.002 .10.1016/j.solmat.2014.01.002 ↗
10. Y. Komatsu, V.D. Mihailetchi, L.J. Geerligs, B. Dijik, J.B. Rem, and M. Harris, Sol. Energy Mater. Sol. Cells (2009). doi: 10.1016/j.solmat.2008.09.019 .10.1016/j.solmat.2008.09.019 ↗
11. J. Engelhardt, A. Frey, L. Mahlstaedt, G. Sebastian, G. Hahn, and B. Terheiden, Energy Procedia (2014). doi: 10.1016/j.egypro.2014.08.050 .10.1016/j.egypro.2014.08.050 ↗
12. J. Libal, R. Petres, R. Kopecek, G. Hahn, K. Wambach, and P. Fath, in 31st IEEE Photovoltaic Specialists Conference (2005), pp. 1209–1212.
13. Y. Schiele, S. Fahr, S. Joos S, G. Hahn, and B. Terheiden, in 28th European Photovoltaic Solar Energy Conference Exhibition (2013), pp. 1242–1247.
14. L. Yang, J. Yang, X. Fang, S. Yang, W. Jingxiao, Y. Qinghao, H. Jianhua, L. Xiang, and W. Chunjian, in Proceedings of ISES World Congress (2007), pp. 1148–1151
15. Y. Cho and H. Chang, Metals Mater. Int. (2013). doi: 10.1007/s12540-013-6035-6 .10.1007/s12540-013-6035-6 ↗
16. S. Werner, E. Lohmüller, U. Belledin, AHG. Vlooswijk, RCG. Naber, S. Mack, and A. Wolf, in 31st European Photovoltaic Solar Energy Conference Exhibition (2015), pp. 637–641.
17. M. Kermaniha, M. Kolahdouz, N. Manavizadeh, H. Aghababa, M. Elahi, M. Iraj, E. Asl Soleimani, and H.H. Radamson, J. Mater. Sci. Mater. Electron. (2016). doi: 10.1007/s10854-016-5452-y .10.1007/s10854-016-5452-y ↗
18. F.F.Y. Wang, Impurity Doping Processes in Silicon (Amsterdam: North Holland, 1981).
19. G.L. Wang, M. Moeen, A. Abedin, M. Kolahdouz, J. Luo, C.L. Qin, H.L. Zhu, J. Yan, H.Z. Yin, F. Li, C. Zhao, and H.H. Radamson, J. Appl. Phys. (2013). doi: 10.1063/1.4821238 .10.1063/1.4821238 ↗
20. M. Kolahdouz, J. Hållstedt, A. Khatibi, M. Östling, R. Wise, and H.H. Radamson, IEEE Trans. Nanotechnol. (2009). doi: 10.1109/TNANO.2008.2009219 .10.1109/TNANO.2008.2009219 ↗
21. R. Ghandi, M. Kolahdouz, J. Hňllstedt, J. Lu, R. Wise, H. Wejtmans, M. Östling, and H.H. Radamson, J. Mater. Sci. Mater. Electron. 18, 747 (2007).10.1007/s10854-007-9121-z ↗