Complementary Studies of Phase Formation During Fabrication of Fe0.65Co0.35 Nanoparticles by Mechanical Alloying
Source abstract
Abstract
Fe-Co nanoparticles were prepared by mechanical alloying in air with various milling times from 0 h to 10 h and annealing temperatures in the range from 773 K to 973 K. The combined use of both conventional x-ray diffraction (XRD) and synchrotron x-ray absorption spectroscopy (XAS) techniques allowed us to obtain accurate data on the phase formation and the oxidation state of the materials. XRD patterns reveal a secondary phase of Fe3O4 that is present in as-milled samples and those annealed in Ar + H2 (5%) at temperatures of up to 600°C. This secondary phase disappeared for annealing temperatures of over 700°C. Meanwhile, analyses of Fe K-edge x-ray absorption near-edge structure (XANES) and extended x-ray absorption fine structure (EXAFS) spectra clearly showed that the local structure around Fe of all samples were of a bcc structure and had the oxidation state of +0. Most importantly, the ratio of bcc and hcp structures was also extracted from the Co K-edge XANES and the measured K-weighted EXAFS spectra of the alloyed Fe-Co samples. Moreover, magnetization measurements at room temperature indicated that the saturation magnetization (M s) increased with increasing milling time and annealing temperature. While the former behavior is assigned to the Fe-Co alloy formation, we believe the effects of reducing the oxidation of the annealed samples to be the major cause of the enhanced M s. The dependence of coercivity (H c) on milling time and annealing temperature was also investigated and discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · nanoparticles nucleation surface interactions · Magnetic properties of thin films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. N. Poudyal, C. Rong, Y. Zhang, D. Wang, M.J. Kramer, R.J. Hebertc, and J.P. Liu, J. Alloys Compd. 521, 55 (2012).10.1016/j.jallcom.2012.01.026 ↗
2. Y.X. Gong, L. Zhen, J.T. Jiang, C.Y. Xu, and W.Z. Shao, J. Magn. Magn. Mater. 321, 3702 (2009).10.1016/j.jmmm.2009.07.019 ↗
3. S.D. Bader, Rev. Mod. Phys. 78, 1 (2006).10.1103/RevModPhys.78.1 ↗
4. A.H. Lu, E.L. Salabas, and F. Schuth, Angew. Chem. Int. Ed. 46, 1222 (2007).10.1002/anie.200602866 ↗
5. Q.A. Pankhurst, J. Connolly, S.K. Jones, and J. Dobson, J. Phys. D Appl. Phys. 36, R167 (2003).10.1088/0022-3727/36/13/201 ↗
6. M. Abbas, M.N. Islam, B.P. Rao, T. Ogawa, M. Takahashi, and C.G. Kim, Mat. Lett. 91, 326 (2013).10.1016/j.matlet.2012.10.019 ↗
7. Q. Zeng, I. Baker, V. McCreary, and Z. Yan, J. Magn. Magn. Mater. 318, 28 (2007).10.1016/j.jmmm.2007.04.037 ↗
8. A. Zelenakova, D. Oleksakova, J. Degmova, J. Kovac, P. Kollar, M. Kusy, and P. Sovak, J. Magn. Magn. Mater. 316, e519 (2007).10.1016/j.jmmm.2007.03.005 ↗
9. M. Sorescu and A. Grabias, Intermetallics 10, 317 (2002).10.1016/S0966-9795(02)00007-9 ↗
10. M. Hesani, A. Yazdani, B. Abedi Ravan, and M. Ghazanfari, Sol. Stat. Commun. 150, 594 (2010).10.1016/j.ssc.2009.12.043 ↗
11. V. Mancier, J.L. Delplancke, J. Delwiche, M.J. Hubin-Franskin, C. Piquer, L. Rebbouh, and F. Grandjean, J. Magn. Magn. Mater. 281, 27 (2004).10.1016/j.jmmm.2004.03.047 ↗
12. Y.D. Kim, J.Y. Chung, J. Kim, and H. Jeon, Mater. Sci. Eng., A 291, 17 (2000).10.1016/S0921-5093(00)00982-5 ↗
13. D.K. Tung, D.H. Manh, P.T. Phong, L.T.H. Phong, N.V. Dai, D.N.H. Nam, and N.X. Phuc, J. Alloys Compd. 640, 34 (2015).10.1016/j.jallcom.2015.04.022 ↗
14. D.H. Manh, T.D. Thanh, N.X. Phuc, L.V. Hong, P.T. Phong, and L.T. Hung, Int. J. Nanotechnol. 8, 241 (2011).10.1504/IJNT.2011.038202 ↗
15. P. Sirvent, E. Berganza, A.M. Aragón, A. Bollero, A. Moure, M. García-Hernández, P. Marín, J.F. Fernández, and A. Quesada, J. Appl. Phys. 115, 17B505 (2014).10.1063/1.4862220 ↗
16. D.H. Manh, D.K. Tung, D.N.H. Nam, L.V. Hong, P.T. Phong, N.X. Phuc, I.E.E.E. Trans, Magn. 50, 2005104 (2014).
17. D. Carta, G. Mountjoy, M. Gass, G. Navarra, M.F. Casula, and A. Corrias, J. Chem. Phys. 127, 204705 (2007).10.1063/1.2799995 ↗
18. S.N. Ehrlich, J.C. Hanson, A. LopezCamara, L. Barrio, M. Estrella, G. Zhou, R. Si, S. Khalid, and Q. Wang, Nuc. Instr. Meth. Phys. Res. Sec A. 649, 213 (2011).10.1016/j.nima.2010.11.076 ↗
19. B. Ravel and M. Newville, J. Synchrotron Radiat. 12, 537 (2005).10.1107/S0909049505012719 ↗
20. S. Azzaza, S. Alleg, H. Moumeni, A.R. Nemamcha, J.L. Rehspringer, and J.M. Greneche, J. Phys. 18, 7257 (2006).
21. D.-S. Yang, S.-H. Kim, Y.-G. Yoo, and S.-C. Yu, J. Phys 190, 012139 (2009).
22. G. Herzer, IEEE Trans. Magn. 26, 1397 (1990).10.1109/20.104389 ↗
23. D.H. Manh, D.K. Tung, L.T.H. Phong, P.T. Thanh, and N.X. Phuc, JPS Conf. Proc. 1, 012010 (2014).
24. K. Akkouche, A. Guittoum, N. Boukherroub, and N. Souami, J. Magn. Magn. Mater. 323, 2542 (2011).10.1016/j.jmmm.2011.05.028 ↗