journal article·2019-11

Analytical Optimization of the Design of Film-Laminated Thermoelectric Power Generators

Yee Rui Koh, Kazuaki Yazawa, Ali Shakouri, Takuma Nagahama, Shinichi Maeda, Tadayuki Isaji, Yoshinori Kasai

Journal of Electronic Materials· Volume 48· Issue 11
Publisher page

Abstract

Thermoelectric generators directly convert heat into electricity, typically made from bulk solid thermoelectric materials. They are a widely used technology in exhaust gas heat recovery from automotive vehicles or radioisotope power generation in space satellites. We propose a film-laminated device structure for lower cost and higher volume production. The film-laminated thermoelectric generator design includes a wide variety of thin-film materials and insulator polymer films. Despite the simple fabrication process, the challenges in the bypass heat leak across the insulator film would increase in a film-laminated device structure. The insulator films in the device exhibit low thermal conductivities but cannot be neglected compared to the thermoelectric materials. Comprehensive analysis is conducted on laminated film-based thermoelectric power generators. The study includes the impacts of the geometry design and thermal conductivity to the power output. The sensitivity of design parameters and material properties is investigated. Cost of the power ($/W) from the available heat is estimated. Both of the above are influenced by the effective heat transfer coefficient of the external thermal contacts. The normalized power as a function of the thermal conductivity ratio of the laminate to the thermoelectric materials is determined for a given ZT value. This relationship can be utilized to measure the impact of the laminating material for any material combination. The power output monotonical decreases as the thermal conductivity ratio gets closer to unity. It is highly desirable to use a one order of magnitude lower thermal conductivity for the insulator, especially for thin thermoelectric layer design.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Innovative Energy Harvesting Technologies · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. K. Yazawa and A. Shakouri, Environ. Sci. Technol. 45, 7548 (2011).10.1021/es2005418 ↗
2. K. Yazawa, Y.R. Koh, and A. Shakouri, Appl. Energy 109, 1 (2013).10.1016/j.apenergy.2013.03.050 ↗
3. M. Zebarjadi, Sci. Rep. 6, 20951 (2016).10.1038/srep20951 ↗
4. Y.R. Koh, K. Yazawa, and A. Shakouri, Int. J. Therm. Sci. 97, 143 (2015).10.1016/j.ijthermalsci.2015.06.004 ↗
5. Y.R. Koh, K. Yazawa, and A. Shakouri, Thermal and Thermomechanical Phenomena in Electronic System (ITherm), p. 1412 (2014). https://doi.org/10.1109/itherm.2014.6892445 .10.1109/itherm.2014.6892445 ↗
6. Y.R. Koh, K. Yazawa, and A. Shakouri, ASME 2013 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, V002T08A036 (2013). https://doi.org/10.1115/ipack2013-73184 .10.1115/ipack2013-73184 ↗
7. K. Yazawa, A. Ziabari, Y.R. Koh, A. Shakouri, A.G. Fedorov, and Y. Joshi, Thermal and Thermomechanical Phenomena in Electronic System (ITherm), p. 99 (2012). https://doi.org/10.1109/itherm.2012.6231419 .10.1109/itherm.2012.6231419 ↗
8. H.S. Dizaji, S. Jafarmadar, S. Khalilarya, and A. Moosavi, Appl. Energy 181, 357 (2016).10.1016/j.apenergy.2016.08.074 ↗
9. M. Hong, T.C. Chasapis, Z. Chen, L. Yang, M.G. Kanatzidis, and G.J. Snyder, et al., ACS Nano 10, 4719 (2016).10.1021/acsnano.6b01156 ↗
10. J. Lim, H. Wang, J. Tang, S.C. Andrews, H. So, and J. Lee, et al., ACS Nano 10, 124 (2016).10.1021/acsnano.5b05385 ↗
11. M. Orrill and S. LeBlanc, J. Appl. Polym. Sci. (2016). https://doi.org/10.1002/app.44256 .10.1002/app.44256 ↗
12. O. Bubnova, Z.U. Khan, A. Malti, S. Braun, M. Fahlman, M. Berggren, and X. Crispin, Nat. Mater. 10, 429 (2011).10.1038/nmat3012 ↗
13. G.-H. Kim, L. Shao, K. Zhang, and K.P. Pipe, Nat. Mater. 12, 719 (2013).10.1038/nmat3635 ↗
14. M. He, F. Qiu, and Z. Lin, Energy Environ. Sci. 6, 1352 (2013).10.1039/c3ee24193a ↗
15. L. Wang, Y. Liu, Z. Zhang, B. Wang, J. Qiu, D. Hui, and S. Wang, Compos. B 122, 145 (2017).10.1016/j.compositesb.2017.04.019 ↗
16. A.K. Menon and S.K. Yee, J. Appl. Phys. 119, 055501 (2016).10.1063/1.4941101 ↗
17. P. Aranguren, A. Roch, L. Stepien, M. Abt, M. von Lukowicz, I. Dani, and D. Astrain, Appl. Therm. Eng. 102, 402 (2016).10.1016/j.applthermaleng.2016.03.037 ↗
18. O. Bubnova and X. Crispin, Energy Environ. Sci. 5, 9345 (2012).10.1039/c2ee22777k ↗
19. J. Bahk, H. Fang, K. Yazawa, and A. Shakouri, J. Mater. Chem. C 3, 10362 (2015).10.1039/C5TC01644D ↗
20. G. Lee, G. Choi, C.S. Kim, Y.J. Kim, H. Choi, S. Kim, H.S. Kim, W.B. Lee, and B.J. Cho, Appl. Sci. 7, 1015 (2017).10.3390/app7101015 ↗
21. M. Feinaeugle, C.L. Sones, E. Koukharenko, and R.W. Eason, Smart Mater. Struct. 22, 115023 (2013).10.1088/0964-1726/22/11/115023 ↗
22. S. LeBlanc, Sustain. Mater. Technol. 1–2, 26 (2014).
23. G.-H. Kim, L. Shao, K. Zhang, and K.P. Pipe, Nat. Mater. (2013). https://doi.org/10.1038/nmat3635 .10.1038/nmat3635 ↗
24. Q.S. Wei, M. Mukaida, K. Kirihara, Y. Naitoh, and T. Ishida, RSC Adv. 4, 28802 (2014).10.1039/C4RA04946B ↗
25. Q. Wei, M. Mukaida, K. Kirihara, Y. Naitoh, and T. Ishida, Materials 8, 732 (2015).10.3390/ma8020732 ↗
26. T.J. Hendricks, S. Yee, and S. Leblanc, J. Electron. Mater. 45, 1751 (2016).10.1007/s11664-015-4201-y ↗
27. G. Fraisse, J. Ramousse, D. Sgorlon, and C. Goupil, Energy Convers. Manag. 65, 351 (2013).10.1016/j.enconman.2012.08.022 ↗
28. T. Zhang, Energy Convers. Manag. 112, 404 (2016).10.1016/j.enconman.2016.01.033 ↗
29. Y. Wang, C. Dai, and S. Wang, Appl. Energy 112, 1171 (2013).10.1016/j.apenergy.2013.01.018 ↗
30. T. Zhang, J. Electron. Mater. 46, 14 (2017).10.1007/s11664-016-4932-4 ↗
31. O. Khonsue, Heat Mass Transf. 48, 1767 (2012).10.1007/s00231-012-1022-x ↗
32. H.S. Han, S. Young, T.H. Ji, Y. Jee, D. Lee, K. S. Jang, and D.H. Oh, Thermal and Thermomechanical Phenomena in Electronic System (ITherm), p. 1222 (2008). https://doi.org/10.1109/itherm.2008.4544400 .10.1109/itherm.2008.4544400 ↗
33. K. Yazawa and A. Shakouri, J. Appl. Phys. 111, 024509 (2012).10.1063/1.3679544 ↗
34. E. Kolasińska and P. Kolsiński, Materials 9, 485 (2016). https://doi.org/10.3390/ma9060485 .10.3390/ma9060485 ↗
35. S.A. Rogers and A.B. Kaiser, Curr. Appl. Phys. 4, 407 (2004).10.1016/j.cap.2003.11.060 ↗
36. N. Mateeva, H. Niculescu, J. Schlenoff, and L.R. Testardi, J. Appl. Phys. 83, 3110 (1998).10.1063/1.367119 ↗
37. A.B. Kaiser and Y.W. Park, Synth. Met. 152, 181 (2005).10.1016/j.synthmet.2005.07.245 ↗
38. E. Kolasińska, P. Kolasiński, and B. Mazurek, Mater. Sci. Eng. 113, 012023 (2016).
39. P. Mele, H. Kamei, H. Yasummune, K. Matsumoto, and K. Miyazaki, Met. Mater. Int. 20, 389 (2014).10.1007/s12540-014-2024-7 ↗
40. W. Zhang, J. Yang, and D. Xu, J. Microelectromech. Syst. 25, 744 (2016).10.1109/JMEMS.2016.2565504 ↗
41. P. Ngan, L. Han, and D.V. Christensen, J. Electron. Mater. 47, 701 (2018).10.1007/s11664-017-5827-8 ↗
42. O. Hogblom and R. Andersson, J. Electron. Mater. 43, 2247 (2014).10.1007/s11664-014-3020-x ↗
43. W. Glatz, E. Schwyter, L. Durrer, and C. Hierold, J. Microelectromech. Syst. 18, 763 (2009).10.1109/JMEMS.2009.2021104 ↗
44. N.S. Benday, D.M. Dryden, K. Kornbluth, and P. Stroeve, Appl. Energy 190, 764 (2017).10.1016/j.apenergy.2016.12.157 ↗
45. H. Alemi, C. Aghanajafi, and A. Kashi, Electr. Electron. Int. J. (ELELIJ) 3, 1 (2014).
46. P.M. Mayer and R.J. Ram, Nanoscale Microscale Thermophys. Eng. 10, 143 (2006).10.1080/10893950600643063 ↗
47. C. Wang, C. Hung, and W. Chen, Energy 39, 236 (2012).10.1016/j.energy.2012.01.025 ↗
48. A.K. Menon, O. Meek, A.J. Eng, and S.K. Yee, J. Appl. Polym. Sci. (2017). https://doi.org/10.1002/app.44060 .10.1002/app.44060 ↗