journal article·2019-03

Chemical Sensing Performance of Flower-Like ZnO/PSi Nanostructures via Electrochemical Impedance Spectroscopy Technique

Ramazanali Dalvand, Shahrom Mahmud, Azman Seeni

Journal of Electronic Materials· Volume 48· Issue 3
Publisher page

Abstract

ZnO nanostructures were synthesized on porous Si (PSi) structures using a method developed by this study known as electric field-assisted aqueous solution technique. The detailed characterization of this nanostructure was performed using atomic force microscopy, field emission scanning electron microscopy, x-ray diffraction, room-temperature photoluminescence and Raman spectroscopy. Electrochemical impedance spectroscopy (EIS) technique was used to detect two classifications of chemical solvents, namely polar and non-polar solvents. Nyquist plots in EIS were utilized to detect chemical solvents (ethanol, acetone, toluene and benzene) exposed to ZnO/PSi nanostructure arrays. The results showed that the grown flower-like ZnO nanostructure arrays served as good chemical sensors with high sensitivity and low power consumption. Meanwhile, the ZnO/PSi nanoflowers exposed to ethanol showed the highest sensitivity (94.6% response) compared to other chemical solutions with the least response exhibited by benzene (68.4% response). It was postulated that the interaction between the solution and oxygen species of ZnO/PSi nanostructure surface induced a resistance change resulting in the release of free electrons that migrated to the conduction band of ZnO/PSi nanoflower structures and reduced the number of surface-adsorbed oxygen species. Subsequently, the changes observed in the Nyquist semicircle diameter and Warburg impedance led to the chemical sensing response.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Analytical Chemistry and Sensors · Gas Sensing Nanomaterials and Sensors · Electrochemical Analysis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. A. Wei, C. Xu, X. Sun, W. Huang, and G.-Q. Lo, J. Disp. Technol. 4, 9 (2008).10.1109/JDT.2007.901569 ↗
2. T. Das, B. Das, K. Parashar, R. Kumar, H. Choudhary, A. Anupama, B. Sahoo, P. Sahoo, and S. Parashar, J. Mater. Sci. Mater. Electron. 28, 13587 (2017).10.1007/s10854-017-7198-6 ↗
3. G. Hanrahan, D.G. Patil, and J. Wang, J. Environ. Monit. 6, 657 (2004).10.1039/b403975k ↗
4. E. Bakker and M. Telting-Diaz, Anal. Chem. 74, 2781 (2002).10.1021/ac0202278 ↗
5. A. Wei, L. Pan, and W. Huang, Mater. Sci. Eng. B 176, 1409 (2011).10.1016/j.mseb.2011.09.005 ↗
6. C. Fernández-Sánchez, C.J. McNeil, and K. Rawson, TrAC Trends Anal. Chem. 24, 37 (2005).10.1016/j.trac.2004.08.010 ↗
7. B. Pejcic and R. De Marco, Electrochim. Acta 51, 6217 (2006).10.1016/j.electacta.2006.04.025 ↗
8. I.I. Suni, TrAC Trends Anal. Chem. 27, 604 (2008).10.1016/j.trac.2008.03.012 ↗
9. H. Huang, L. Zhang, W. Zhang, Y. Gan, and H. Shao, J. Power Sources 184, 663 (2008).10.1016/j.jpowsour.2008.01.004 ↗
10. B.K. Das, T. Das, K. Parashar, S. Parashar, R. Kumar, H.K. Choudhary, V.B. Khopkar, A. Anupama, and B. Sahoo, Mater. Chem. Phys. 221, 419 (2019).10.1016/j.matchemphys.2018.09.056 ↗
11. A. Lasia, Mod. Asp. Electrochem. 32, 143 (2002).
12. B.-Y. Chang and S.-M. Park, Annu. Rev. Anal. Chem. 3, 207 (2010).10.1146/annurev.anchem.012809.102211 ↗
13. N. Naderi and M. Hashim, Appl. Surf. Sci. 258, 6436 (2012).10.1016/j.apsusc.2012.03.056 ↗
14. H. Abdulgafour, F. Yam, Z. Hassan, K. Al-Heuseen, and M. Jawad, J. Alloys Compd. 509, 5627 (2011).10.1016/j.jallcom.2011.02.100 ↗
15. H. Cai, H. Shen, Y. Yin, L. Lu, J. Shen, and Z. Tang, J. Phys. Chem. Solids 70, 967 (2009).10.1016/j.jpcs.2009.05.004 ↗
16. M. Balucani, P. Nenzi, E. Chubenko, A. Klyshko, and V. Bondarenko, J. Nanopart. Res. 13, 5985 (2011).10.1007/s11051-011-0346-7 ↗
17. Y. Zhao, D. Yang, D. Li, and M. Jiang, Appl. Surf. Sci. 252, 1065 (2005).10.1016/j.apsusc.2005.01.176 ↗
18. C.-J. Chang, S.-T. Hung, C.-K. Lin, C.-Y. Chen, and E.-H. Kuo, Thin Solid Films 519, 1693 (2010).10.1016/j.tsf.2010.08.153 ↗
19. Q.-L. Ma, B.-G. Zhai, and Y.M. Huang, J. Sol–gel Sci. Technol. 64, 110 (2012).10.1007/s10971-012-2836-1 ↗
20. N.I. Rusli, M. Tanikawa, M.R. Mahmood, K. Yasui, and A.M. Hashim, Materials 5, 2817 (2012).10.3390/ma5122817 ↗
21. J. Elias, R. Tena-Zaera, and C. Lévy-Clément, J. Electroanal. Chem. 621, 171 (2008).10.1016/j.jelechem.2007.09.015 ↗
22. R. Dalvand, S. Mahmud, M. Alimanesh, and A.H. Vakili, Ceram. Int. 43, 1488 (2017).10.1016/j.ceramint.2016.10.119 ↗
23. R. Dalvand, S. Mahmud, and J. Rouhi, Mater. Lett. 160, 444 (2015).10.1016/j.matlet.2015.08.029 ↗
24. H.-C. Hsu, C.-S. Cheng, C.-C. Chang, S. Yang, C.-S. Chang, and W.-F. Hsieh, Nanotechnology 16, 297 (2005).10.1088/0957-4484/16/2/021 ↗
25. D.Y. Kim, J.Y. Kim, H. Chang, M.S. Kim, J.-Y. Leem, J. Ballato, and S.-O. Kim, Nanotechnology 23, 485606 (2012).10.1088/0957-4484/23/48/485606 ↗
26. J. Lee, W. Gao, Z. Li, M. Hodgson, J. Metson, H. Gong, and U. Pal, Appl. Phys. A 80, 1641 (2005).10.1007/s00339-004-3197-6 ↗
27. K.A. Salman, K. Omar, and Z. Hassan, Mater. Lett. 68, 51 (2012).10.1016/j.matlet.2011.10.030 ↗
28. C.-Y. Tsay, K.-S. Fan, S.-H. Chen, and C.-H. Tsai, J. Alloys Compd. 495, 126 (2010).10.1016/j.jallcom.2010.01.100 ↗
29. C.-F. Yu, C.-W. Sung, S.-H. Chen, and S.-J. Sun, Appl. Surf. Sci. 256, 792 (2009).10.1016/j.apsusc.2009.08.061 ↗
30. L. Cui, H.-Y. Zhang, G.-G. Wang, F.-X. Yang, X.-P. Kuang, R. Sun, and J.-C. Han, Appl. Surf. Sci. 258, 2479 (2012).10.1016/j.apsusc.2011.10.076 ↗
31. O. Jayakumar, V. Sudarsan, C. Sudakar, R. Naik, R. Vatsa, and A. Tyagi, Scr. Mater. 62, 662 (2010).10.1016/j.scriptamat.2010.01.020 ↗
32. C. Tonon, C. Duvignacq, G. Teyssedre, and M. Dinguirard, J. Phys. D Appl. Phys. 34, 124 (2001).10.1088/0022-3727/34/1/319 ↗
33. J. Petersen, C. Brimont, M. Gallart, O. Crégut, G. Schmerber, P. Gilliot, B. Hönerlage, C. Ulhaq-Bouillet, J. Rehspringer, and C. Leuvrey, J. Appl. Phys. 104, 113539 (2008).10.1063/1.3021358 ↗
34. M. Malek, M. Mamat, Z. Khusaimi, M. Sahdan, M. Musa, A. Zainun, A. Suriani, N.M. Sin, S.A. Hamid, and M. Rusop, J. Alloys Compd. 582, 12 (2014).10.1016/j.jallcom.2013.07.202 ↗
35. Y. Huang, M. Liu, Z. Li, Y. Zeng, and S. Liu, Mater. Sci. Eng. B 97, 111 (2003).10.1016/S0921-5107(02)00396-3 ↗
36. M. Archer, M. Christophersen, and P. Fauchet, Sens. Actuators B Chem. 106, 347 (2005).10.1016/j.snb.2004.08.016 ↗
37. L. Wang, Y. Kang, X. Liu, S. Zhang, W. Huang, and S. Wang, Sens. Actuators B Chem. 162, 237 (2012).10.1016/j.snb.2011.12.073 ↗
38. H.S. Al-Salman and M. Abdullah, Measurement 59, 248 (2015).10.1016/j.measurement.2014.08.011 ↗
39. I. Schechter, M. Ben-Chorin, and A. Kux, Anal. Chem. 67, 3727 (1995).10.1021/ac00116a018 ↗
40. S. Green and P. Kathirgamanathan, Mater. Lett. 52, 106 (2002).10.1016/S0167-577X(01)00376-7 ↗