Direct Fabrication of Inkjet-Printed Dielectric Film for Metal–Insulator–Metal Capacitors
Source abstract
Abstract
In this study, an inkjet-printed dielectric film that used a polymer-based SU-8 ink was fabricated for use in a metal–insulator–metal (MIM) capacitor. Thermal treatment of the inkjet-printed SU-8 polymer film affected its surface morphology, chemical structure, and surface wettability. A 20-min soft-bake at 60°C was applied to eliminate inkjet-printed bubbles and ripples. The ultraviolet-exposed SU-8 polymer film was crosslinked at temperatures between 120°C and 220°C and became disordered at 270°C, demonstrated using Fourier-transform infrared spectroscopy. A maximum SU-8 polymer film hard-bake temperature of 120°C was identified, and a printing process was subsequently employed because the appropriate water contact angle of the printed film was 79°. Under the appropriate inkjet printing conditions, the two-transmission-line method was used to extract the dielectric and electrical properties of the SU-8 polymer film, and the electrical behavior of the fabricated MIM capacitor was also characterized.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Advanced Sensor and Energy Harvesting Materials · Electrohydrodynamics and Fluid Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. D.L. Kabir, I. Mejia, M.R. Perez, J.C. Ramos-Hernandez, and M.A. Quevedo-Lopez, J. Electron. Mater. 44, 490 (2016).10.1007/s11664-014-3427-4 ↗
2. C. Nash, Y. Spiesschaert, G. Amarandei, Z. Stoeva, R.I. Tomov, D. Tonchev, I. van Driessche, and B.A. Glowacki, J. Electron. Mater. 44, 497 (2015).10.1007/s11664-014-3434-5 ↗
3. H.S. Yang, B.J. Kang, and J.H. Oh, J. Electron. Mater. 45, 755 (2016).10.1007/s11664-015-4196-4 ↗
4. José F. Salmerón, F. Molina-Lopez, D. Briand, J.J. Ruan, A. Rivadeneyra, M.A. Carvajal, L.F. Capitán-Vallvey, N.F. de Rooij, and A.J. Palam, J. Electron. Mater. 43, 604 (2014).10.1007/s11664-013-2893-4 ↗
5. L. Jacot-Descombes, M.R. Gullo, M. Mastrangeli, V.J. Cadarso, and J. Brugger, Micro Nano Lett. 8, 633 (2013).10.1049/mnl.2013.0241 ↗
6. J.H.T. Ransley, M. Watari, D. Sukumaran, R.A. McKendry, and A.A. Seshia, Microelectron. Eng. 83, 1621 (2006).10.1016/j.mee.2006.01.175 ↗
7. M. Robin, W. Kuai, M. Amela-Cortes, S. Cordier, Y. Molard, T. Mohammed-Brahim, E. Jacques, and M. Harnois, ACS Appl. Mater. Interfaces 7, 21975 (2015).10.1021/acsami.5b06678 ↗
8. S. Mukhopadhyay, J.P. Banerjee, and S.S. Roy, Int. J. Adhes. Adhes. 42, 30 (2013).10.1016/j.ijadhadh.2012.12.001 ↗
9. M. Shaw, D. Nawrocki, R. Hurditch, and D. Johnson, Microsyst.Technol. 10, 1 (2003).10.1007/s00542-002-0216-4 ↗
10. N.P. Pham, J.N. Burghartz, and P.M. Sarro, J. Micromech. Microeng. 15, 691 (2005).10.1088/0960-1317/15/4/003 ↗
11. H.-L. Kao, C.-L. Cho, L.-C. Chang, C.-S. Yeh, B.-W. Wang, and H.-C. Chiu, Thin Solid Films 544, 64 (2013).10.1016/j.tsf.2013.04.125 ↗
12. J.M. Shaw, J.D. Gelorme, N.C. LaBianca, W.E. Conley, and S.J. Holmes, IBM J. Res. Dev. 41, 81 (1997).10.1147/rd.411.0081 ↗
13. M.K. Gunde, N. Hauptman, M. Maček, and M. Kunaver, Appl. Phys. A 95, 673 (2009).10.1007/s00339-008-4966-4 ↗
14. N.K. Das, S.M. Voda, and D.M. Pozar, IEEE Trans. Micro Theory Tech. 35, 636 (1987).10.1109/TMTT.1987.1133722 ↗
15. M.J. Degerstrom, B.K. Gilbert, and E.S. Daniel, in IEEE-EPEP Electrical Performance of Electronic Packaging. 77 (2008).
16. G. Zou, H. Grönqvist, J.P. Starski, and J. Liu, IEEE Trans. Adv. Packag. 25, 503 (2002).10.1109/TADVP.2002.807593 ↗
17. B.K. Tehrani, J. Bito, B.S. Cook, and M.M. Tentzeris, in IEEE MTT-S International Microwave Symposium. (2014).
18. D.M. Pozar, Microwave Engineering, 4th ed. (New York: Wiley, 2011).
19. B.S. Cook, J.R. Cooper, and M.M. Tentzeris, IEEE Microwav. Wirel. Compon. Lett. 23, 353 (2013).10.1109/LMWC.2013.2264658 ↗
20. B.K. Tehrani, C. Mariotti, B.S. Cook, L. Roselli, and M.M. Tentzeris, Org. Electron. 29, 135 (2016).10.1016/j.orgel.2015.11.022 ↗
21. C. Mariotti, F. Alimenti, L. Roselli, and M.M. Tentzeris, IEEE Trans. Micro Theory Tech. 65, 62 (2017).10.1109/TMTT.2016.2615934 ↗
22. J. Melai, C. Salm, S. Smits, J. Visschers, and J. Schmitz, J. Micromech. Microeng. 19, 065012 (2009).10.1088/0960-1317/19/6/065012 ↗