journal article·2006-01

Interfacial reactions and phase equilibria in the Al-Cu/Ta systems

Chin-Yi Chou, Sinn-Wen Chen

Journal of Electronic Materials· Volume 35· Issue 1
Publisher page

Abstract

Thermal inkjet technology is in widespread use for color printers. In the roofshooter thermal inkjet printhead, tantalum is often used as the diffusion barrier between the gold and the conduction layers, Al, Cu, and Al-Cu. This study investigated the contact stabilities of Al/Ta, Cu/Ta, and Al-Cu/Ta systems using the reaction couple technique. The couples were annealed in a furnace at 600°C, 750°C, 900°C, 1000°C, and 1200°C for various lengths of time. One reaction layer, the Al3Ta phase, was formed at the interface in the Al/Ta and Al-Cu/Ta couples heat treated at 750°C, 900°C, and 1000°C. No Cu is observed in the Al3Ta phase even in the Al-Cu/Ta couples; however, the reaction couples with Al-Cu have slower reaction rates. For the Al/Ta reaction couples annealed at 600°C and Cu/Ta couples annealed at 750°C, 900°C, 1000°C, and 1200°C, no noticeable interfacial reaction was observed. It was concluded that the contacts were very stable and Ta was a very good barrier layer. In addition, phase equilibria studies of the Al-Ta system were carried out. The experimental results indicate that the Al2Ta phase was not stable at 850°C and higher. A revised Al-Ta phase diagram was proposed in this study.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Copper Interconnects and Reliability · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. J.L. Stoffel, U.S. Patent 4,862,197 (1989).
2. U.E. Hess, U.S. Patent 4,719,477 (1988).
3. C.L. Wright, J.G. Bears, C.S. Chan, R.R. Hay, and F. Ura, U.S. patent 4,535,343 (1985).
4. S.P. Garg, Phase Diagrams of Binary Tantalum Alloys (Calcutta, India: Indian Institute of Metals, 1996), pp. 8–12.
5. H. Kimura, O. Nakano, and T. Ohkoshi, Trans. Nat. Res. Inst. Met. (Jpn.) 16, 1 (1973).
6. J.C. Schuster, Z. Metallkd. 76, 724 (1985).
7. P.R. Subramanian, D.B. Miracle, and S. Mazdiyasni, Metall. Trans. A 21A, 539 (1990).10.1007/BF02671926 ↗
8. H.R. Gong and B.X. Liu, Appl. Phys. Lett. 83, 4515 (2003).10.1063/1.1630353 ↗
9. H.J. Lee, K.W. Kwon, C. Ryn, and R. Sinclair, Act Mater. 47, 3965 (1999).10.1016/S1359-6454(99)00257-8 ↗
10. L.A. Clevenger, A. Mutscheller, J.M.E. Harper, Jr., C. Carbal, and K. Barmak, J. Appl. Phys. 72, 4918 (1992).10.1063/1.352059 ↗
11. K. Holloway, P.M. Fryer, Jr., C. Carbal, J.M.E. Harper, P.J. Bailey, and K.H. Kelleher, J. Appl. Phys. 71, 5433 (1992).10.1063/1.350566 ↗
12. Q. Xu, H. Zhang, B. Ding, and Z. Hu, J. Mater. Sci. Technol. 18, 512 (2002).
13. J.K. Howard, J.F. White, and P.S. Ho, J. Appl. Phys. 49, 4083 (1973).10.1063/1.325369 ↗
14. J.K. Howard, R.F. Lever, P.J. Smith, and P.S. Ho, J. Vac. Sci. Technol. 13, 68 (1976).10.1116/1.568959 ↗
15. E.G. Colgan and J.W. Mayer, J. Mater. Res. 4, 815 (1989).10.1557/JMR.1989.0815 ↗