journal article·2012-10

Laser-Assisted Chemical Polishing of Silicon (112) Wafers

Niru Dandekar, Robert Chivas, Scott Silverman, Xiaolu Kou, Mark Goorsky

Journal of Electronic Materials· Volume 41· Issue 10
Publisher page

Abstract

Pulsed laser-assisted chemical etching (PLACE) offers an advanced, novel substrate preparation method for molecular beam epitaxy (MBE) growth of mercury cadmium telluride on silicon (112) wafers. By controlling the laser fluence, the chemical etch process is refined into a final polish step. PLACE offers surface roughness on the order of chemical mechanical polishing standards and has been verified by 488-nm Raman and high-resolution x-ray diffraction as causing no surface or subsurface damage. To the contrary, experiments show that using PLACE not only alters the surface chemically but also removes subsurface damage through recrystallization reaching micron depths. The process occurs in a modular vacuum chamber that could conceivably be transferred between tools so that vacuum is not broken between polishing and MBE deposition. PLACE can achieve ultra-high-purity and fine dimensional control since it is a dry process relying on pyrolytic vapor-phase reactions initiated, and constrained, by a pulsed laser. Since the process is a function of laser fluence and optics, it is imminently scalable to 6-inch wafer sizes and beyond.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Laser Material Processing Techniques · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. L.A. Paden, J.W. Bangs, R.M. Emerson, R.M. Olshove, E.M. Norton, D.A. Garnett, E. Smith, K.A. Garvine, J.M. Peterson, and M. Reddy, J. Electron. Mater. 39, 1007 (2010).10.1007/s11664-010-1089-4 ↗
2. D. Reago, Proceedings of SPIE Defense and Security 2008 (Bellingham, WA: SPIE, 2008), 6940-82-a2.
3. J. Chen, D. Yang, H. Li, X. Ma, D. Tian, L. Li, and D. Que, J. Cryst. Growth 306, 292 (2007).10.1016/j.jcrysgro.2007.05.052 ↗
4. A.A. Baski and L.J. Whitman, Phys. Rev. Lett. 74, 956 (1995).10.1103/PhysRevLett.74.956 ↗
5. Y. Yang and E.D. Williams, Surf. Sci. 215, 102 (1989).10.1016/0039-6028(89)90703-6 ↗
6. J.D. Benson, L.O. Bubulac, J. Smith, N. Jacobs, J.K. Markunas, M. Jaime-Vasquez, L.A. Almeida, A.J. Stoltz, P.S. Wijewarnasuriya, and G. Brill, J. Electron. Mater. 39, 1080 (2010).10.1007/s11664-010-1262-9 ↗
7. N.K. Dhar, P.R. Boyd, M. Martinka, J.H. Dinan, L.A. Almeida, and N. Goldsman, J. Electron. Mater. 29, 748 (2000).10.1007/s11664-000-0219-9 ↗
8. M. Jaime-Vasquez, R.N. Jacobs, J.D. Benson, A.J. Stoltz, L.A. Almeida, L.O. Bubulac, Y. Chen, and G. Brill, J. Electron. Mater. 39, 951 (2010).10.1007/s11664-010-1152-1 ↗
9. J. Xin, W. Cai, and J.A. Tichy, Wear 268, 837 (2010).10.1016/j.wear.2009.12.005 ↗
10. P. Gupta, P.A. Coon, B.G. Koehler, and S.M. George, Surf. Sci. 249, 92 (1991).10.1016/0039-6028(91)90835-G ↗
11. J. Yan, S. Muto, and T. Kuriyagawa, Int. J. Abras. Technol. 3, 175 (2010).10.1504/IJAT.2010.034049 ↗