Fatigue Characterization for Flexible Circuit with Polyimide on Adhesiveless Copper
Source abstract
Abstract
Adhesiveless materials are commonly used for electric or portable products that need high flexibility in operation. We studied a structure which included copper substrate and polyimide (PI) film without any resin to avoid residual resin issues during the manufacturing process. Life-time and fatigue characteristics require further study. Normally, the technique to measure life-time is by storing samples to monitor the changes over a long period, but this is time-consuming. An accelerated aging test is an alternative way to predict and evaluate the property shift in the short term; nevertheless, the test conditions will influence the results. Temperature and relative humidity are the major environmental parameters, and the conditions at 85°C/85% relative humidity (RH) and 150°C are discussed in this paper. A better prediction was found using accelerated testing at 85°C/85% RH after comparing with data from samples stored for 3 years, with errors <5%. Also, the copper grain microstructure affects the fatigue character and mechanical properties. The best flexibility is achieved when an appropriate copper and PI thickness has been identified.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced Sensor and Energy Harvesting Materials · Synthesis and properties of polymers
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. H.D. Merchant and M.G. Minor, J. Electron. Mater. 28, 997 (1999).10.1007/s11664-999-0175-y ↗
2. H.D. Merchant, J. Electron. Mater. 26, 833 (1997).10.1007/s11664-997-0259-5 ↗
3. T.R. Bergstresser, N.E. Bergkessel, and C.A. Poutasse, Proceedings of IPC 4th Annual National Conference on Flexible Circuits, p. 15 (1998).
4. T.R. Bergstresser, N.E. Bergkessel, and C.A. Poutasse, Proceedings of IPC 4th Annual National Conference on Flexible Circuits, p. 354 (1998).
5. F. Barlow, A. Lostetter, and A. Elshabini, Microelectron. Reliab. 42, 1091 (2002).10.1016/S0026-2714(02)00061-6 ↗
6. B. Noh, J. Yoon, B. Lee, and S. Jung, J. Mater. Sci. 22, 790 (2011).
7. H.D. Merchant, M.G. Minor, S.J. Clouser, and D.T. Leonard, Circuit World. 25, 38 (1998).10.1108/03056129910244842 ↗
8. E. Liston, L. Martinu, and M. Wertheimer, J. Adhes. Sci. Technol. 7, 1091 (1993).10.1163/156856193X00600 ↗
9. L.P. Buchwalter and K. Holloway, J. Adhes. Sci. Technol. 12, 95 (1998).10.1163/156856198X00678 ↗
10. T. Hatano, Y. Kurosawa, and J. Miyake, J. Electron. Mater. 29, 611 (1999).10.1007/s11664-000-0054-z ↗
11. S. Kamiya, H. Furuta, and M. Omiya, Surf. Coat. Technol. 202, 1084 (2007).10.1016/j.surfcoat.2007.07.061 ↗
12. S. Iwamori, T. Miyashita, S. Fukuda, S. Nozaki, N. Fukuda, and K. Sudoh, J. Adhes. 63, 309 (1997).10.1080/00218469708017225 ↗
13. J. Dong, G. Ji, and G. Xue, J. Polym. Sci. Part B 30 (1992).10.1002/polb.1992.090300409 ↗