Treatment of Surface-Hydroxylated BaTiO3 Particles by Bis(2-ethylhexyl) sulfosuccinate Sodium Salt (AOT) to Improve the Dielectric and Electrical Properties of BaTiO3–Poly(vinylidene fluoride) Composites
Source abstract
Abstract
Hydroxylated barium titanate (BaTiO3; h-BT) particles have been synthesized by aqueous solution of hydrogen peroxide (H2O2), then modified hydroxylated barium titanate (BaTiO3; h-BT) particles were synthesized by aqueous solution of hydrogen peroxide (H2O2) followed by modification with bis(2-ethylhexyl) sulfosuccinate sodium salt (h-BT@AOT) to form h-BT@AOT-poly(vinylidene fluoride) (PVDF) composites via a solution casting technique. Fourier-transform infrared spectroscopy, scanning electron microscopy, and dielectric and electrical measurements using an impedance analyzer were applied to understand the effect of AOT on the dielectric and electrical performance of the composites. The dielectric constant of the composites including modified ceramic particles (h-BT@AOT) increased remarkably with increasing filler content. The results showed that the h-BT@AOT particles were well dispersed in the polymer matrix. The dielectric constant of the composites with 12 wt.% h-BT@AOT was as high as ∼ 120 at 100 Hz at the percolation threshold, being nearly 19 times higher than that of the PVDF matrix. Moreover, the dielectric loss of the composites was negligible (< 0.5) as compared with pure h-BT. Thus, this method for fabrication of h-BT@AOT provides a larger interface area for binding the matrix with the modified ceramic particles via electrostatic interactions. Hence, AOT has a significant interfacial impact, being responsible for the enhancement of the dielectric properties and possibly useful in the field of energy storage devices as compared with pure h-BT.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric materials and actuators · Electromagnetic wave absorption materials · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Y. Song, Y. Shen, H. Liu, Y. Lin, M. Li, and C.W. Nan, J. Mater. Chem. 22, 8063 (2012).10.1039/c2jm30297g ↗
2. M.F. Lin and P.S. Lee, J. Mater. Chem. A 1, 14455 (2013).10.1039/c3ta13190d ↗
3. J. Lu, K.S. Moon, J. Xu, anC.P. Wong, J. Mater. Chem. 16, 1543 (2006).10.1039/b514182f ↗
4. Q. Zhang, Y. Jiang, E. Yu, and H. Yang, Surf. Coat. Technol. 358, 293 (2019).10.1016/j.surfcoat.2018.11.056 ↗
5. M.S. Cao, X.X. Wang, M. Zhang, J.C. Shu, W.Q. Cao, H.J. Yang, X.Y. Fang, and J. Yuan, Adv. Funct. Mater. 29, 1807398 (2019).10.1002/adfm.201807398 ↗
6. Y. Rao, S. Ogitani, P. Kohl, and C.P. Wong, J. Appl. Polym. Sci. 83, 1084 (2002).10.1002/app.10082 ↗
7. J. Lu, K.S. Moon, B.K. Kim, and C.P. Wong, Polymers 48, 1510 (2007).10.1016/j.polymer.2007.01.057 ↗
8. L. He, J. Wang, Z. Yang, K. Zhu, and C. Deng, Funct. Mater. Lett. 12, 1950034 (2019).10.1142/S1793604719500346 ↗
9. C. Ribeiro, V. Sencadas, J.L.G. Ribelles, and S.L. Mendez, Soft Mater. 8, 274 (2010).10.1080/1539445X.2010.495630 ↗
10. Z. Li, L.A. Fredin, P. Tewari, S.A. DiBenedetto, M.T. Lanagan, M.A. Ratner, and T.J. Marks, Chem. Mater. 22(18), 5154 (2010).10.1021/cm1009493 ↗
11. D.W. Wang, M.S. Cao, J. Yuan, Q.L. Zhao, H.B. Li, D.Q. Zhang, and S. Agathopoulos, J. Am. Chem. Soc. 94, 647 (2011).
12. Y. Bai, Z.Y. Cheng, V. Bharti, H.S. Xu, and Q.M. Zhang, Appl. Phys. Lett. 76, 3804 (2000).10.1063/1.126787 ↗
13. K. Yu, Y.J. Niu, Y.C. Zhou, Y.Y. Bai, and H. Wang, J. Am. Ceram. Soc. 96, 2519 (2013).10.1111/jace.12338 ↗
14. R. Schroeder, L.A. Majewski, and M. Grell, Adv. Mater. 17, 1535 (2005).10.1002/adma.200401398 ↗
15. X. Chen, F. Liang, W. Lu, Z. Lin, Y. Zhao, and M. Fu, Polymers 10(6), 586 (2018).10.3390/polym10060586 ↗
16. M.S. Cao, J.C. Shu, X.X. Wang, X. Wang, M. Zhang, H.J. Yang, X.Y. Fang, and J. Yuan, Ann. Phys. (Berlin) 531, 1800390 (2019).10.1002/andp.201800390 ↗
17. H.M. Jung, J.H. Kang, S.Y. Yang, J.C. Won, Y.S. Kim, Chem. Mater. 22, 450 (2009).10.1021/cm9030254 ↗
18. Y. Li, X. Huang, Z. Hu, P. Jiang, S. Li, and T. Tanaka, ACS Appl. Mater. Interfaces 3, 4396 (2011).10.1021/am2010459 ↗
19. S. Luo, S. Yu, R. Sun, and C.P. Wong, ACS Appl. Mater. Interfaces 6, 176 (2014).10.1021/am404556c ↗
20. G. Petrossian, C.J. Hohimer, and A. Ameli, Polymers 11(2), 280 (2019).10.3390/polym11020280 ↗
21. W. Yan, Z.J. Han, B.T. Phung, and K. Ostrikov, ACS Appl. Mater. Interfaces 4, 2637 (2012).10.1021/am300300f ↗
22. Y. Deng, Y.J. Zhang, Y. Xiang, G.S. Wang, and H.B. Xu, J. Mater. Chem. 19, 2058 (2009).10.1039/b812652f ↗
23. L.Y. Xie, X.Y. Huang, C. Wu, and P.K. Jiang, J. Mater. Chem. 21, 5897 (2011).10.1039/c0jm04574h ↗
24. X. Huang, B. Sun, Y. Zhu, S. Li, and P. Jiang, Prog. Mater. Sci. 100, 187 (2019).10.1016/j.pmatsci.2018.10.003 ↗
25. P.K. Mahato and S. Sen, J. Mater. Sci. Mater. Electron. 26, 2969 (2015).10.1007/s10854-015-2784-y ↗
26. Y. Sui, W.T. Chen, J.J. Ma, R.H. Hu, and D.S. Liu, RSC Adv. 6, 7364 (2016).10.1039/C5RA25371C ↗
27. W. Ma, J. Zhang, and X. Wang, Appl. Surf. Sci. 254, 2947 (2008).10.1016/j.apsusc.2007.10.037 ↗
28. T. Prabhakaran and J. Hemalatha, Mater. Chem. Phys. 137, 781 (2013).10.1016/j.matchemphys.2012.09.064 ↗
29. M. Singha, B.C. Yadav, A. Ranjan, M. Kaur, and S.K. Gupta, Sens. Actuators B 241, 1170 (2017).10.1016/j.snb.2016.10.018 ↗
30. V.S. Puli, M. Ejaz, R. Elupula, M. Kothakonda, S. Adireddy, R.S. Katiyar, S.M. Grayson, and D.B. Chrisey, Polymers 105, 35 (2016).10.1016/j.polymer.2016.10.020 ↗
31. X. Zhang, Y. Wang, Y. Sheng, H. Ye, L. Xu, and H. Wu, Chem. Phys. Lett. 723, 89 (2019).10.1016/j.cplett.2019.03.027 ↗
32. Q. Chi, G. Liu, C. Zhang, Y. Cui, X. Wang, and Q. Lei, Results Phys. 8, 391 (2018).10.1016/j.rinp.2017.12.052 ↗
33. I.A. Asimakopoulos, G.C. Psarras, and L. Zoumpoulakis, eXPRESS Polym. Lett. 8, 692 (2014).10.3144/expresspolymlett.2014.72 ↗
34. Y. Feng, B. Miao, H. Gong, Y. Xie, X. Wei, and Z. Zhang, ACS Appl, Mater. Interfaces8, 19054 (2016).10.1021/acsami.6b04776 ↗
35. Y. Niu, Y. Bai, K. Yu, Y. Wang, F. Xiang, and H. Wang, ACS Appl. Mater. Interfaces7, 24168 (2015).10.1021/acsami.5b07486 ↗
36. C. Zhang, Z. Shi, F. Mao, C. Yang, J. Yang, X. Zhu, and H. Zuo, J. Mater. Sci. 53, 13230 (2018).10.1007/s10853-018-2545-4 ↗
37. X. Xiao, H. Yang, N. Xu, L. Hu, and Q. Zhang, RSC Adv. 5, 79342 (2015).10.1039/C5RA15681E ↗
38. M. Rahimabady, M.S. Mirshekarloo, K. Yao, and L. Lu, Phys. Chem. Chem. Phys. 15, 16242 (2013).10.1039/c3cp52267a ↗
39. Z.H. Dai, T. Li, Y. Gao, J. Xu, J. He, Y. Weng, and B.H. Guo, Compos. Sci. Technol. 169, 142 (2019).10.1016/j.compscitech.2018.10.014 ↗
40. T.P. Schuman, S. Siddabattuni, O. Cox, and F. Dogan, Compos. Interfaces 17, 719 (2010).10.1163/092764410X495315 ↗
41. B. Wen, J. Yuan, Z.L. Hou, W.L. Song, L. Zhang, M.M. Lu, H.B. Jin, X.Y. Fang, W.Z. Wang, and M.S. Cao, Carbon 65, 124 (2013).10.1016/j.carbon.2013.07.110 ↗
42. P. He, M.S. Cao, J.C. Shu, Y.Z. Cai, X.X. Wang, Q.L. Zhao, and J. Yuan, ACS Appl. Mater. Interfaces 11, 12535 (2019).10.1021/acsami.9b00593 ↗
43. P. He, X.X. Wang, Y.Z. Cai, J.C. Shu, Q.L. Zhao, J. Yuan, M.S. Cao, Nanoscale 11, 6080 (2019).10.1039/C8NR10489A ↗
44. Y. Feng, W.L. Li, Y.F. Hou, Y. Yu, W.P. Cao, T.D. Zhang, and W.D. Fei, J. Mater. Chem. C 3, 1250 (2015).10.1039/C4TC02183E ↗
45. P. Thomas, S. Satapathy, K. Dwarakanath, and K.B.R. Varma, eXPRESS Polym. Lett. 4, 632 (2010).10.3144/expresspolymlett.2010.78 ↗
46. W. Ling, L. Hongxia, J. Peihai, W. Ting, and L. Lizhu, RSC Adv. 6, 25015 (2016).10.1039/C5RA27296C ↗
47. C.W. Nan and F.S. Jin, Phys. Rev. B 48, 8578 (1993).10.1103/PhysRevB.48.8578 ↗
48. F.A. He, K.H. Lam, J.T. Fan, and L.W. Chan, Polym. Test. 32, 927 (2013).10.1016/j.polymertesting.2013.05.002 ↗
49. D.R. Wang, Y.R. Bao, J.W. Zha, J. Zhao, Z.M. Dang, and G.H. Hu, Polymers 54, 1916 (2013).10.1016/j.polymer.2013.02.012 ↗
50. M.Y. Tse, X. Wei, C.M. Wong, L.B. Huang, K.H. Lam, J. Dai, and J. Hao, RSC Adv. 8, 32972 (2018).10.1039/C8RA07401A ↗
51. X. Gao, Y. Huang, Y. Liu, S. Kormakov, X. Zheng, D. Wu, and D. Wu, RSC Adv. 7, 14761 (2017).10.1039/C7RA02061A ↗