Numerical Modeling of 193-nm Excimer Laser Ablation on CR-39 Polymer
Source abstract
Abstract
Laser polymer processing has evolved into an important field of applied and fundamental research. Allyl diglycol carbonate or CR-39 is considered an important polymer for use in optical and medical applications since it is a hard and infusible thermoset plastic that is insoluble in all solvents. The temperature distribution of CR-39 when subjected to irradiation during 193-nm excimer laser ablation was investigated. An effective simulation was developed to reflect the effects of polymer thermal diffusion, laser fluence, beam geometry, and number of pulses. A two-dimensional finite element model was used to predict the temperature distribution and ablation depth in the plastic CR-39 polymer under the 193-nm laser ablation process. The photochemical threshold ablation fluence was 750 mJ/cm2 for a single laser pulse, but dropped to 240 mJ/cm2 for repetitive laser pulses. At higher fluence, thermal effects exhibited a slight contribution to the ablation process. For fluence ≥ 750 mJ/cm2, the ablation depth increased abruptly. It can thus be inferred that the rate of temperature increase with pulse number increased concomitantly with the fluence. Thus, thermal effects are a significant factor in the ablation process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Laser Material Processing Techniques · Polymer Nanocomposite Synthesis and Irradiation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. R. Srinivasan and V. Mayne-Banton, Appl. Phys. Lett. 41, 576 (1982).10.1063/1.93601 ↗
2. Y. Kawmura, K. Toyoda, and S. Namba, Appl. Phys. Lett. 40, 374 (1982).10.1063/1.93108 ↗
3. R. Srinivasan, B. Braren, R.W. Dreyfus, L. Hadel, and D.E. Seeger, J. Opt. Soc. Am. B 3, 5 (1986).10.1364/JOSAB.3.000785 ↗
4. P.R. Herman, B. Chen, and D.J. Moore, Mater. Res. Soc. Symp. Proc. 285, 163 (1993).10.1557/PROC-285-163 ↗
5. F. Wagner and P. Hoffmann, Appl. Phys. A 69, S841 (1999).10.1007/s003390051543 ↗
6. J. Yip, K. Chan, K.M. Sin, and KSh Lau, Polym. Int. 53, 634 (2004).10.1002/pi.1278 ↗
7. H.R. Zangeneh, P. Parvin, Z. Zamanipour, B. Jaleh, S. Jelvani, and M. Taheri, Radiat. Eff. Defects Solids 163, 11 (2008).10.1080/10420150801899935 ↗
8. P. Parvin, M. Refahizadeh, S.Z. Mortazvi, K. Silakhori, A. Mahdiloo, and P. Aghaii, Appl. Surf. Sci. 292, 247 (2014).10.1016/j.apsusc.2013.11.125 ↗
9. J. Kim and X. Xu, J. Laser Appl. 15, 4 (2003).10.2351/1.1585085 ↗
10. W. Kam, Y.S. Ong, W.H. Lim, and R. Zakaria, Opt. Laser Eng. 55, 1 (2014).10.1016/j.optlaseng.2013.10.012 ↗
11. J. Mass, B. Liu, S. Hajela, Y. Huang, X. Gong, and W.J. Chappell, Proc. IEEE PP, 99 (2017).
12. W. Li and E. Sancaktar, J. Laser Appl. 29, 1 (2017).
13. M. Rosenberger, S. Hessler, H. Pauer, M. Girschikofsky, G. L. Roth, B. Adelmann, H. Woern, B. Schmauss, and R. Hellmann, Integrated optics: devices, materials and technologies XXI, in Proceedings of SPIE, vol. 10106, p. 101061N-1 (2017).
14. M.F. Zaki, Braz. J. Phys. 38, 4 (2008).10.1590/S0103-97332008000500005 ↗
15. P.E. Dyer, Photochemical Processing of Electronic Material (London: Academic, 1992).
16. S. Lazare and V. Granier, Laser Chem. 10, 25 (1989).10.1155/1989/18750 ↗
17. R. Srinivasan and B. Braren, Chem. Rev. 89, 6 (1989).10.1021/cr00096a003 ↗
18. A. Miotello and P.M. Ossi, eds., Springer Series in Material Chemistry, Vol. 130 (Berlin: Springer, 2009).
19. S.R. Cain, F.C. Burns, and C.E. Otis, J. Appl. Phys. 71, 4107 (1992).10.1063/1.350840 ↗
20. N.P. Furzikov, Appl. Phys. Lett. 56, 1638 (1990).10.1063/1.103150 ↗
21. G.C.D. D’Coute and S.V. Babu, J. Appl. Phys. 76, 3052 (1994).10.1063/1.357486 ↗
22. ANSYS v11 multiphysics software, Release 11.0sp1 UP20070830.
23. J.G. Lunney, Appl. Surf. Sci. 86, 79 (1995).10.1016/0169-4332(94)00368-8 ↗
24. M.J. Weber, Handbook of Optical Materials (Boca Raton: CRC Press, 2002).10.1201/9781420050196 ↗
25. ASM international, Characterization and Failure Analysis of Plastics (Materials park: ASM international, 2003).
26. M. Refahizadeh, A. Majdabadi, P. Parvin, K. Silakhori, S.Z. Mortazavi, A. Mehdilo, and P. Aghaii, Opt. Mater. Express 5, 1543 (2015).10.1364/OME.5.001543 ↗
27. H.D. Wolpert, The Photonics Design and Application Handbook (Pittsfield: Laurin, 1991).
28. B. Mansouri, P.Parvin, and K.J.A. Ooi, https://arxiv.org/pdf/1508.07574 .
29. R.S. Kappes, F. Schönfeld, Ch Li, A.A. Golriz, M. Nagel, Th Lippert, H. Butt, and J.S. Gutmann, SpringerPlus 3, 489 (2014).10.1186/2193-1801-3-489 ↗
30. J.E. Andrew, P.E. Dyer, D. Forster, and P.H. Key, Appl. Phys. Lett. 43, 717 (1983).10.1063/1.94488 ↗
31. R. Srinivasan and B. Braren, J. Polym. Sci. Polym. Chem. 22, 2601 (1984).10.1002/pol.1984.170221026 ↗
32. V. Srinivasan, M.A. Smrtic, and S.V. Babu, J. Appl. Phys. 59, 11 (1986).10.1063/1.336728 ↗
33. C.-R. Yang, Y.S. Hsieh, G.Y. Hwang, and Y.D. Lee, J. Micrmech. Microeng. 14, 4 (2004).