journal article·2015-11

Characterization of the Microstructure of an AlN-Mullite-Al2O3 Ceramic Layer on WCu Composite Alloy for Microelectronic Application

Jiandong Zhu, Rong An, Chunqing Wang, Wei Zhang, Guangwu Wen

Journal of Electronic Materials· Volume 44· Issue 11
Publisher page

Abstract

An AlN composite ceramic layer was designed and fabricated on WCu substrates by hydrolysis-assisted solidification and firing. First, the surface of WCu substrates were pre-coated with polycarbosilane/AlN ceramic layers by spinning; the layers were then fabricated by firing. The phase composition, microstructure, and element distribution of the ceramic layer and interfacial reaction layer were investigated by use of scanning electron microscopy, energy-dispersive spectroscopy and x-ray diffraction. The results showed that the ceramic layers were composed of AlN, mullite, and Al2O3. There were many nanocrystalline rods on the surface of the ceramic layers. The Cr layer prevented the WCu substrate from reacting with water vapor during firing, and the Ni layer prevented diffusion of tungsten into the Cr layer. Study of the cross section of the ceramic layer fired on the Cr/Ni/WCu substrate revealed a perfect interfacial reaction layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Nuclear materials and radiation effects · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. K.N. Tu, Microelectron. Reliab. 51, 517 (2010).
2. H.S. Chin, K.Y. Cheong, and A.B. Ismail, Metall. Mater. Trans. B 41, 824 (2010).10.1007/s11663-010-9365-5 ↗
3. S. Ye, F. Xiao, Y.X. Pan, Y.Y. Ma, and Q.Y. Zhang, Mat. Sci. Eng. R 71, 1 (2010).10.1016/j.mser.2010.07.001 ↗
4. S.J. Hsu, C.H. Sha, and C.C. Lee, IEEE Trans. Compon. Packag. Manuf. Technol. 3, 1625 (2013).10.1109/TCPMT.2013.2272557 ↗
5. L. Wu, L. Song, J. Wu, L. Zhao, and C. Jiang, Ceram. Int. 33, 747 (2007).10.1016/j.ceramint.2005.12.018 ↗
6. K.R. Donner, F. Gaertner, and T. Klassen, J. Therm. Spray. Technol. 20, 299 (2011).10.1007/s11666-010-9573-1 ↗
7. H.X. Li, V.S. Rudnev, X.H. Zheng, T.P. Yarovaya, and R.G. Song, J. Alloy. Compd. 462, 99 (2008).10.1016/j.jallcom.2007.08.046 ↗
8. K.H. Lin, Z.H. Xu, and S.T. Lin, J. Mater. Eng. Perform. 20, 231 (2011).10.1007/s11665-010-9678-1 ↗
9. Y. Kurokawa, K. Utsumi, and H. Takamizawa, J. Am. Ceram. Soc. 71, 588 (1998).10.1111/j.1151-2916.1988.tb05924.x ↗
10. T.B. Jackson, A.V. Virkar, K.L. More, R.B. Dinwiddie Jr., and R.A. Cutler, J. Am. Ceram. Soc. 80, 1421 (1997).10.1111/j.1151-2916.1997.tb03000.x ↗
11. S.A. Jang and G.M. Choi, J. Am. Ceram. Soc. 76, 957 (1993).10.1111/j.1151-2916.1993.tb05319.x ↗
12. M. Ma, Z. Liu, Y. Li, Y. Zeng, and D. Yao, J. Eur. Ceram. Soc. 33, 833 (2013).10.1016/j.jeurceramsoc.2012.09.030 ↗
13. S. Bandyopadhyay, G. Rixecker, F. Aldinger, S. Pal, K. Mukherjee, and H.S. Maiti, J. Am. Ceram. Soc. 85, 1010 (2002).10.1111/j.1151-2916.2002.tb00212.x ↗
14. S. Novak, T. Kosmac, K. Krnel, and G. Drazic, J. Eur. Ceram. Soc. 22, 289 (2002).10.1016/S0955-2219(01)00287-4 ↗
15. J.D. Zhu, R. An, C.Q. Wang, and G.W. Wen, IEEE Trans. Compon. Packag. Manuf. Technol. 5, 182 (2015).10.1109/TCPMT.2014.2375316 ↗
16. J. Zhang and S.H. Qi, Polym. Compos. 35, 381 (2014).10.1002/pc.22671 ↗
17. A.J. Ma, W.X. Chen, Y.G. Hou, and G. Zhang, Polym. Plast. Technol. 49, 354 (2010).10.1080/03602550903532091 ↗
18. Y. Yu, Y. Guo, X. Cheng, and Y. Zhang, J. Mater. Chem. 19, 5637 (2009).10.1039/b905860e ↗
19. Y. Wang, H. Liu, H. Cheng, and J. Wang, Ceram. Int. 40, 12789 (2014).10.1016/j.ceramint.2014.04.133 ↗
20. M.M.S. Sanad, M.M. Rashad, E.A. Abdel-Aal, and M.F. El-Shahat, Ceram. Int. 39, 1547 (2013).10.1016/j.ceramint.2012.07.105 ↗