journal article·2003-12

A potential drop-in replacement for eutectic Sn-Pb solder—The Sn-Zn-Ag-Al-Ga solder

Kwang-Lung Lin, Kang-I Chen, Po-Cheng Shi

Journal of Electronic Materials· Volume 32· Issue 12
Publisher page

Abstract

The Sn-Zn alloy exhibits the closest eutectic temperature to the eutectic Sn-Pb solder, although it suffers an easy oxidation characteristic. A novel alloy based on the Sn-Zn eutectic alloy was developed and found promising as a drop-in replacement for the eutectic Sn-Pb solder. This alloy, consisting of a Sn-Zn-Ag-Al-Ga combination, was developed, showing promising properties. Differential scanning calorimetry (DSC) investigation reveals that the investigated solder exhibits a eutectic temperature of around 199°C. The thermal gravimetric analysis (TGA) study shows it attains much better oxidation resistance than the eutectic Sn-Pb solder does at 250°C. The stress-strain curve indicates that this solder also possesses a higher ultimate tensile strength (UTS) and a better ductility than the eutectic Sn-Pb solder. A wetting time, on Cu, of less than 1 sec was found for this solder with a suitable, organic acid-activated flux. Gallium tended to enhance wetting behavior. The cost of this solder was also estimated and was found to be comparable with the Sn-Pb solder.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. I.E. Anderson and R.L. Terpstra, U.S. patent 6,231,691 (15 May 2001).
2. M. Hansen and K. Anderko, Constitution of Binary Alloy, 2nd ed. (New York: McGraw-Hill, 1985), pp. 52–54.
3. R.J.K. Wassink, Soldering in Electronics, 2nd ed. (Ayr, Scotland: Electrochemical Publications, 1989), p. 207.
4. Y. Miyazawa and T. Ariga, 1st Int. Symp. on Environmentally Conscious Design and Inverse Manufacturing (Los Alamitos, CA: IEEE Computer Society, 1999), pp. 616–619.10.1109/ECODIM.1999.747686 ↗
5. H. Mavoori, S. Vaynman, J. Chin, B. Moran, L.M. Keer, and M.E. Fine, Mater. Res. Soc. Proc. 390, 161 (1995).10.1557/PROC-390-161 ↗
6. J. Glazer, J. Electron. Mater. 23, 693 (1994).10.1007/BF02651361 ↗
7. E.P. Wood and K.L. Nimmo, J. Electron. Mater. 23, 709 (1994).10.1007/BF02651363 ↗
8. H. Mavoori, J. Chin, S. Vaynman, B. Moran, L. Keer, and M. Fine, J. Electron. Mater. 26, 783 (1997).10.1007/s11664-997-0252-z ↗
9. J. Foley, A. Gickler, F.H. Leprevost, and D. Brown, J. Electron. Mater. 29, 1258 (2000).10.1007/s11664-000-0021-8 ↗
10. C.M. Chuang, T.S. Lui, and L.H. Chen, J. Electron. Mater. 30, 1232 (2001).10.1007/s11664-001-0155-3 ↗
11. M.E. Loomans, S. Vaynman, G. Ghosh, and M.E. Fine, J. Electron. Mater. 23, 741 (1994).10.1007/BF02651368 ↗
12. M. McCormack and S. Jin, J. Electron. Mater. 23, 635 (1994).10.1007/BF02653349 ↗
13. M.L. Huang, C.M.L. Wu, J.K.L. Lai, L. Wang, and F.G. Wang, J. Mater. Sci.: Mater. Electron. 11, 57 (2000).
14. K. Suganuma, K. Niihara, T. Shoutoku, and Y. Nakamura, J. Mater. Res. 13, 2859 (1998).10.1557/JMR.1998.0391 ↗
15. K. Suganuma, T. Murata, H. Noguchi, and Y. Toyoda, J. Mater. Res. 15, 884 (2000).10.1557/JMR.2000.0126 ↗
16. H.M. Lee, S.W. Yoon, and B.J. Lee, J. Electron. Mater. 27, 1161 (1998).10.1007/s11664-998-0065-8 ↗
17. W.L. Lin, L.H. Wen, and T.P. Liu, J. Electron Mater. 27, 1007 (1998).10.1007/s11664-998-0153-9 ↗
18. K.L. Lin and L.H. Wen, J. Mater. Sci.: Mater. Electron. 9, 5 (1998).
19. K.L. Lin and Y.C. Wang, J. Electron. Mater. 27, 1205 (1998).10.1007/s11664-998-0070-y ↗
20. S.P. Yu, H.C. Wang, M.H. Hon, and M.C. Wang, JOM 52, 36 (2000).
21. S.P. Yu, M.C. Wang, and M.H. Hon, J. Mater. Res. 16, 76 (2001).10.1557/JMR.2001.0015 ↗
22. K.L. Lin and T.P. Liu, Mater. Chem. Phys. 56, 171 (1998).10.1016/S0254-0584(98)00171-0 ↗
23. M. McCormack and S. Jin, J. Electron. Mater. 23, 715 (1994).10.1007/BF02651364 ↗
24. T.J. Anderson and I. Ansara, J. Phase Equilibria 13, 181 (1992).10.1007/BF02667485 ↗
25. J. Dutkiewicz, Z. Moser, L. Zabdyr, D.D. Gohil, T.G. Chart, I. Ansara, and C. Girard, Bull. Alloy Phase Diagrams 11, 77 (1990).10.1007/BF02841587 ↗
26. M.R. Baren, Bull. Alloy Phase Diagrams 11, 334 (1990).10.1007/BF02843310 ↗
27. J.L. Murray, Bull. Alloy Phase Diagrams 4, 183 (1983).10.1007/BF02884877 ↗
28. K.I. Chen and K.L. Lin, J. Electron. Mater. 31, 861 (2002).10.1007/s11664-002-0196-2 ↗
29. K.L. Lin and H.M. Shu, J. Electron. Mater. 30, 1068 (2001).10.1007/s11664-001-0131-y ↗