journal article·2009-01

Effect of Ni-Cr Layer on Adhesion Strength of Flexible Copper Clad Laminate

Bo-In Noh, Seung-Boo Jung

Journal of Electronic Materials· Volume 38· Issue 1
Publisher page

Abstract

In this study, the effect of a Ni-Cr layer on the adhesion strength of flexible copper clad laminate (FCCL) was evaluated after thermal treatment. The changes in the chemical composition, morphology, and adhesion properties were characterized by scanning electron microscopy (SEM), x-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and 90 deg peel test. The results showed that both the peel strength and thermal resistance of the FCCL increased with increasing Cr ratio. The thermal treatment of the FCCL increased the proportion of C-N bonds and reduced that of the C-O and carbonyl (C=O) bonds in the polyimide. The roughness of the fracture surface decreased with increasing thermal treatment temperature and holding time. The chemical function and roughness of the fracture surface were affected by the Ni-to-Cr ratio.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Additive Manufacturing and 3D Printing Technologies · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. S. Kamiya, H. Furuta, M. Omiya. Surf. Coat. Technol. 202, 1084 (2007) doi: 10.1016/j.surfcoat.2007.07.06110.1016/j.surfcoat.2007.07.061 ↗
2. I.H. Kazi, P.M. Wild, T.N. Moore, M. Sayer. Thin Solid Films 515, 2602 (2006) doi: 10.1016/j.tsf.2005.10.07710.1016/j.tsf.2005.10.077 ↗
3. F.Z. Ren, P. Liu, S.G. Jia, B.H. Tian, J.H. Su. Mater. Sci. Eng. A 419, 244 (2006) doi: 10.1016/j.msea.2005.12.024
4. J.Y. Song, J. Yu. Acta Mater. 50, 3985 (2002) doi: 10.1016/S1359-6454(02)00197-010.1016/S1359-6454(02)00197-0 ↗
5. S.H. Kim, S.W. Na, N.E. Lee, Y.W. Nam, Y.H. Kim. Surf. Coat. Technol. 200, 2072 (2005) doi: 10.1016/j.surfcoat.2005.05.02110.1016/j.surfcoat.2005.05.021 ↗
6. J.Y. Park, Y.S. Jung, J. Cho, W.K. Choi. Appl. Surf. Sci. 252, 5877 (2006) doi: 10.1016/j.apsusc.2005.08.01910.1016/j.apsusc.2005.08.019 ↗
7. W.J. Liu, X.J. Guo, C.H. Chuang. Surf. Coat. Technol. 196, 192 (2005) doi: 10.1016/j.surfcoat.2004.08.12710.1016/j.surfcoat.2004.08.127 ↗
8. J.H. Hsieh, L.H. Fong, S. Yi, G. Metha. Surf. Coat. Technol. 112, 235 (1999) doi: 10.1016/S0257-8972(98)00779-810.1016/S0257-8972(98)00779-8 ↗
9. 9. J. Ge, M.P.K. Turune, J.K. Kivilahti. Thin Solid Films 440, 198 (2003) doi: 10.1016/S0040-6090(03)00851-410.1016/S0040-6090(03)00851-4 ↗
10. E.M. Liston, L. Martinu, M.R. Wertheimer. J. Adhes. Sci. Technol. 7, 1091 (1993) doi: 10.1163/156856193X0060010.1163/156856193X00600 ↗
11. O.D. Greenwood, R.D. Boyd, J. Hopkins, J.P. Badtal. J. Adhes. Sci. Technol. 9, 311 (1995) doi: 10.1163/156856195X0052710.1163/156856195X00527 ↗
12. M.P.K. Turunen, P. Marjamaki, M. Paajanen, J. Lahtinen, J.K. Kivilahti. Microelectron. Reliab. 44, 993 (2004) doi: 10.1016/j.microrel.2004.01.00110.1016/j.microrel.2004.01.001 ↗
13. T. Miyamura, J. Koike. Mater. Sci. Eng. A 445–446, 620 (2007) doi: 10.1016/j.msea.2006.09.09710.1016/j.msea.2006.09.097 ↗
14. J. Burkstrand. J. Vac. Sci. Technol. 16, 1072 (1979) doi: 10.1116/1.57016310.1116/1.570163 ↗
15. J. Jordan, P. Sanda, J. Morar, C. Kovac, F. Himpsel, R. Pollak. J. Vac. Sci. Technol. A 4, 1046 (1986) doi: 10.1116/1.57345110.1116/1.573451 ↗
16. W. Lee, Y. Lee, S. Rha, Y. Lee, K. Lim, Y. Chung, et al. Appl. Surf. Sci. 205, 128 (2003) doi: 10.1016/S0169-4332(02)01016-410.1016/S0169-4332(02)01016-4 ↗
17. S. Iwamori, T. Miyashita, S. Fukuda, S. Nozaki, N. Fukuda, K. Sudoh. J. Adhes. 63, 309 (1997) doi: 10.1080/0021846970801722510.1080/00218469708017225 ↗
18. D.Y. Shih, N. Klymoko, R. Flitsch, J. Paraszezak, S. Nunes. J. Vac. Sci. Technol. A 9, 2963 (1991) doi: 10.1116/1.57715710.1116/1.577157 ↗